journal article·2025-01-10Open access

Utilizing almond shell filler to improve strength and sustainability of jute fiber composites

Ahmet Çetin

Polymer Composites· Volume 46· Issue 1

Abstract

Abstract In recent years, natural fibers have begun to replace synthetic fibers in automotive, building, and marine applications because of their sustainability, renewability, low cost, and availability of raw materials. However, because of their low strength, biocomposites are strengthened by hybridization with stronger synthetic fibers or adding fillers. This study reinforced high‐cellulose jute fiber composites with cellulose‐based almond ( Prunus amygdalus ) shell filler (ASF). Natural waste almond shells were ground to microparticle size. Hybrid composites were prepared by adding microparticulate ASF to the jute fiber composites at 0%, 1.5%, 3%, 4.5%, and 6% by weight. A comprehensive experimental study included tensile, flexural, Charpy impact (flat and edgewise), and shear tests. The addition of ASF significantly improved the mechanical properties of the jute fiber composites, and the best values were obtained with 3 wt.% ASF addition. Tensile, flexural, impact, and shear properties increased by 48.2%, 63.5%, 24.4%, and 52.2%, respectively. Scanning Electron microscopy (SEM) micrographs used in morphological structural analysis prove that the high mechanical values are achieved by ASF strengthening the interlaminar adhesion. This study contributed to developing a hybrid natural composite material reinforced with natural fillers that is stronger, environmentally friendly, and sustainable. Highlights The organic structure of Almond Shell Filler (ASF) ensured the sustainability of natural composites. Cellulosic ASF significantly contributed to the structural stiffness and strength of jute fiber composites. ASF reduced voids, improved fiber‐matrix bonding, and prevented debonding and delamination. ASF optimized the mechanical performance of jute fiber composites at 3%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering Adiyaman University Adıyaman Turkey

Department of Mechanical Engineering Çukurova University Adana Turkey

Funding

Adiyaman Üniversitesi

References (100+)

Show source-provided references
1. 10.1023/A:102101392191610.1023/A:1021013921916 ↗
2. 10.1016/j.pnsc.2024.02.01010.1016/j.pnsc.2024.02.010 ↗
3. 10.1016/j.jobe.2024.10851410.1016/j.jobe.2024.108514 ↗
4. 10.1016/j.progpolymsci.2012.04.00310.1016/j.progpolymsci.2012.04.003 ↗
5. 10.1002/pc.2453610.1002/pc.24536 ↗
6. 10.1177/073168441774536810.1177/0731684417745368 ↗
7. 10.1016/j.compositesb.2024.11136910.1016/j.compositesb.2024.111369 ↗
8. VarmaM ChandranS Vijay KumarV SuyambulingamI SiengchinS.A comprehensive review on the machining and joining characteristics of natural fiber‐reinforced polymeric composites.2024;45(6):4850‐4875. doi:10.1002/pc.2814810.1002/pc.28148 ↗
9. 10.1016/j.compositesa.2007.02.00110.1016/j.compositesa.2007.02.001 ↗
10. 10.1002/pc.2108810.1002/pc.21088 ↗
11. Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry
12. 10.1016/j.compositesb.2011.01.01010.1016/j.compositesb.2011.01.010 ↗
13. 10.1016/j.compositesa.2011.01.01710.1016/j.compositesa.2011.01.017 ↗
14. 10.1016/j.jclepro.2017.10.10110.1016/j.jclepro.2017.10.101 ↗
15. DevB RahmanA AlamR ReponR NawabY.Mapping the progress in natural fiber reinforced composites: preparation mechanical properties and applications.2023;44(7):3748‐3788. doi:10.1002/pc.2737610.1002/pc.27376 ↗
16. 10.1016/j.jobe.2023.10611710.1016/j.jobe.2023.106117 ↗
17. 10.1016/j.jobe.2022.10452110.1016/j.jobe.2022.104521 ↗
18. 10.1016/j.jobe.2020.10167510.1016/j.jobe.2020.101675 ↗
19. RameshM RajeshkumarLN SrinivasanN KumarDV BalajiD.Influence of filler material on properties of fiber‐reinforced polymer composites: a review.2022;22(1):898‐916. doi:10.1515/epoly‐2022‐008010.1515/epoly-2022-0080 ↗
20. research tm.Biocomposites market. Accessed 30/04/2024 https://www.transparencymarketresearch.com/biocomposites-market.html
21. MaitiS IslamMR UddinMA AfrojS EichhornSJ KarimN.Sustainable fiber‐reinforced composites: a review.2022;6(11):2200258. doi:10.1002/adsu.20220025810.1002/adsu.202200258 ↗
22. 10.1016/j.compositesb.2020.10825410.1016/j.compositesb.2020.108254 ↗
23. 10.1007/s10924‐008‐0094‐710.1007/s10924‐008‐0094‐7 ↗
24. 10.1002/pc.2124410.1002/pc.21244 ↗
25. 10.1007/s10924‐020‐01756‐110.1007/s10924‐020‐01756‐1 ↗
26. 10.1016/j.compositesb.2020.10815410.1016/j.compositesb.2020.108154 ↗
27. 10.1002/pc.2753410.1002/pc.27534 ↗
28. 10.1016/j.compositesb.2020.10858410.1016/j.compositesb.2020.108584 ↗
29. 10.1016/j.aiepr.2023.02.00210.1016/j.aiepr.2023.02.002 ↗
30. 10.1002/pc.2266310.1002/pc.22663 ↗
31. 10.1016/j.jobe.2024.10873210.1016/j.jobe.2024.108732 ↗
32. 10.1016/j.jobe.2021.10274710.1016/j.jobe.2021.102747 ↗
33. 10.1016/j.jobe.2019.10078610.1016/j.jobe.2019.100786 ↗
34. 10.1155/2016/423597510.1155/2016/4235975 ↗
35. 10.1177/002199831769542010.1177/0021998317695420 ↗
36. 10.17265/2161‐6213/2023.10‐12.00310.17265/2161‐6213/2023.10‐12.003 ↗
37. 10.1016/B978-0-08-100958-1.00005-010.1016/B978-0-08-100958-1.00005-0 ↗
38. 10.1007/s12008‐023‐01695‐w10.1007/s12008‐023‐01695‐w ↗
39. 10.1016/j.matpr.2021.01.89710.1016/j.matpr.2021.01.897 ↗
40. 10.1016/j.jmatprotec.2008.06.03810.1016/j.jmatprotec.2008.06.038 ↗
41. 10.1007/s12206‐019‐0817‐910.1007/s12206‐019‐0817‐9 ↗
42. 10.1016/j.matpr.2017.07.21410.1016/j.matpr.2017.07.214 ↗
43. 10.1080/15440478.2017.132026010.1080/15440478.2017.1320260 ↗
44. 10.1016/j.compscitech.2009.06.00610.1016/j.compscitech.2009.06.006 ↗
45. 10.1016/j.compositesb.2012.12.00410.1016/j.compositesb.2012.12.004 ↗
46. 10.1007/s13399‐024‐05427‐210.1007/s13399‐024‐05427‐2 ↗
47. 10.1016/j.matpr.2018.04.10710.1016/j.matpr.2018.04.107 ↗
48. 10.1016/j.compositesb.2014.05.00810.1016/j.compositesb.2014.05.008 ↗
49. 10.15376/biores.15.4.7671‐768610.15376/biores.15.4.7671‐7686 ↗
50. 10.1177/0021998322110853110.1177/00219983221108531 ↗
51. Effects of cubic boron nitride (c‐BN) nanoparticle addition on the wear properties of carbon FRP composites
52. ShubbarSDA.Experimental investigation of rice husk particles as filler in hybrid composites.2018.
53. 10.1177/089270571881553610.1177/0892705718815536 ↗
54. KumarTV ChandrasekaranM SanthanamV.Characteristics analysis of coconut shell husk reinforced polymer composites.2017.
55. IslamMT DasSC SahaJ et al.Effect of coconut Shell powder as filler on the mechanical properties of coir‐polyester composites.2017;5:75‐82.10.13189/cme.2017.050401 ↗
56. 10.1007/s12221‐015‐1119‐110.1007/s12221‐015‐1119‐1 ↗
57. 10.15376/biores.11.2.3524-353710.15376/biores.11.2.3524-3537 ↗
58. 10.1016/j.proeng.2014.11.81210.1016/j.proeng.2014.11.812 ↗
59. 10.1007/s00289‐017‐2163‐310.1007/s00289‐017‐2163‐3 ↗
60. 10.1016/j.polymertesting.2019.01.01710.1016/j.polymertesting.2019.01.017 ↗
61. 10.1002/pc.2661110.1002/pc.26611 ↗
62. 10.1016/j.compositesb.2018.04.01710.1016/j.compositesb.2018.04.017 ↗
63. 10.1016/j.matpr.2020.09.00110.1016/j.matpr.2020.09.001 ↗
64. 10.1080/15440478.2020.173959210.1080/15440478.2020.1739592 ↗
65. 10.1016/j.compositesb.2018.03.03710.1016/j.compositesb.2018.03.037 ↗
66. 10.1016/j.matpr.2020.10.81110.1016/j.matpr.2020.10.811 ↗
67. 10.1155/2013/79262010.1155/2013/792620 ↗
68. 10.1016/j.polymdegradstab.2007.10.01210.1016/j.polymdegradstab.2007.10.012 ↗
69. 10.1007/s13726‐022‐01042‐y10.1007/s13726‐022‐01042‐y ↗
70. 10.1080/1023666X.2023.222148310.1080/1023666X.2023.2221483 ↗
71. 10.1177/1477760623118663310.1177/14777606231186633 ↗
72. 10.1177/109963621882274010.1177/1099636218822740 ↗
73. Performance evolution of walnut shell particle filled glass fiber reinforced composite
74. 10.1016/j.compositesb.2011.06.00810.1016/j.compositesb.2011.06.008 ↗
75. 10.1016/j.rser.2021.11205410.1016/j.rser.2021.112054 ↗
76. 10.3390/ma1109178210.3390/ma11091782 ↗
77. 10.1016/j.coco.2020.10054810.1016/j.coco.2020.100548 ↗
78. 10.1007/s10570‐018‐2092‐910.1007/s10570‐018‐2092‐9 ↗
79. Almond Kernel global production and top producing countries ‐ tridge. n.d.https://www.tridge.com/intelligences/almond-in-shell/production(accessed September 14 2021)
80. 10.1007/s13399‐023‐04840‐310.1007/s13399‐023‐04840‐3 ↗
81. 10.1007/s10570‐021‐03985‐610.1007/s10570‐021‐03985‐6 ↗
82. 10.1016/j.matdes.2014.10.00310.1016/j.matdes.2014.10.003 ↗
83. 10.1016/j.jmps.2003.06.00110.1016/j.jmps.2003.06.001 ↗
84. TripathySS Di LandroL FontanelliD MarchettiA LevitaG.Mechanical properties of jute fibers and interface strength with an epoxy resin.2000;75(13):1585‐1596. doi:10.1002/(SICI)1097‐4628(20000328)75:13<1585::AID‐APP4>3.0.CO;2‐Q10.1002/(SICI)1097-4628(20000328)75:13<1585::AID-APP4>3.0.CO;2-Q ↗
85. 10.1177/00405175840540120610.1177/004051758405401206 ↗
86. 10.1016/j.compositesa.2010.01.00510.1016/j.compositesa.2010.01.005 ↗
87. KimyaD.Laminating Resin MGSTM L160 and Hardener H160 Hexion. Technical Data Sheet. The Netherlands.2009.
88. 10.1007/BF0217399410.1007/BF02173994 ↗
89. InternationaA.Standard test method for flexural properties of polymer matrix composite materials.201711.
90. 10.1002/pc.2637410.1002/pc.26374 ↗
91. ISO_179–1.Determination of Charpy impact properties. Part 1: Non‐instrumented impact test 2000.2010.
92. 10.1016/j.tws.2019.10634310.1016/j.tws.2019.106343 ↗
93. INTERNATIONAL A.Standard Test Method for Shear Properties of Composite Materials by V‐Notched Rail Shear Method.2021.
94. 10.28948/ngumuh.108054010.28948/ngumuh.1080540 ↗
95. 10.1177/096739112097350810.1177/0967391120973508 ↗
96. 10.1155/2019/169762710.1155/2019/1697627 ↗
97. RameshM RajeshkumarL BalajiD PriyadharshiniMJSP.Polyurethanes AoW. Properties and characterization techniques for waterborne polyurethanes.2021109–123.
98. 10.1002/pc.2629110.1002/pc.26291 ↗
99. 10.1002/pc.2592710.1002/pc.25927 ↗
100. 10.1007/s13196‐014‐0121‐310.1007/s13196‐014‐0121‐3 ↗