Static and dynamic mechanical analysis of geometrically different kenaf/PLA green composite laminates
Source abstract
Abstract
Abstract The type of reinforcement used in polymer composite is one of the main governing parameters to ascertain the performance of a polymer composite. Green composites using fiber mat as reinforcement have shown promising results. In the present study, three different types of kenaf fiber mat (ie, bidirectional, unidirectional, and randomly oriented) have been incorporated with polylactic acid (PLA) for fabrication of green composite laminates through compression molding. Static mechanical characterization (tensile, flexural, and impact) of the developed composites has shown that type of fiber mat affects the mechanical performance of laminated composites markedly. Unidirectional fiber reinforced PLA composite has shown the highest tensile strength in comparison to bidirectional fiber reinforced PLA composite (BDFRPC) and randomly oriented fiber reinforced PLA composite (ROFRPC). BDFRPC has shown better flexural properties whereas ROFRPC achieved higher impact strength. Dynamic mechanical analysis of different kenaf/PLA laminates was performed to investigate the visco‐elastic nature with respect to temperature. Results show that ROFRPC has observed the best results under dynamic loading condition. The morphological study of the fractured surfaces during various testing was performed using scanning electron microscope to investigate mechanisms and reasons of failure of composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
MPAE Divison Netaji Subhas Institute of Technology, University of Delhi New Delhi India
MPAE Divison Netaji Subhas University of Technology, (Formerly NSIT, University of Delhi) New Delhi India
References (49)
Show source-provided references
1. 10.1007/s11837-006-0234-210.1007/s11837-006-0234-2 ↗
2. 10.1016/j.matdes.2011.10.00710.1016/j.matdes.2011.10.007 ↗
3. 10.1002/9781118911068.ch1010.1002/9781118911068.ch10 ↗
4. 10.1016/j.compositesb.2012.07.00410.1016/j.compositesb.2012.07.004 ↗
5. 10.1080/00405167.2012.67680010.1080/00405167.2012.676800 ↗
6. 10.1016/j.compscitech.2004.12.03610.1016/j.compscitech.2004.12.036 ↗
7. 10.1016/S0266-3538(03)00100-310.1016/S0266-3538(03)00100-3 ↗
8. 10.1016/j.compscitech.2004.09.02310.1016/j.compscitech.2004.09.023 ↗
9. 10.1016/j.polymer.2005.01.02710.1016/j.polymer.2005.01.027 ↗
10. 10.1177/073168441244799210.1177/0731684412447992 ↗
11. 10.1177/002199830935396110.1177/0021998309353961 ↗
12. 10.1016/j.compositesb.2005.04.00110.1016/j.compositesb.2005.04.001 ↗
13. 10.1002/app.1291310.1002/app.12913 ↗
14. 10.15376/biores.11.1.2665-268310.15376/biores.11.1.2665-2683 ↗
15. 10.1016/j.dt.2015.08.00510.1016/j.dt.2015.08.005 ↗
16. Tanwer A. K. · Int J Res Advent Technol · 2014 · 12 · 34
17. 10.1080/03602559.2011.58423910.1080/03602559.2011.584239 ↗
18. 10.1016/j.compscitech.2007.06.02210.1016/j.compscitech.2007.06.022 ↗
19. 10.1177/073168440935520110.1177/0731684409355201 ↗
20. 10.1177/073168441140723310.1177/0731684411407233 ↗
21. 10.1007/s12221-010-0060-610.1007/s12221-010-0060-6 ↗
22. Salman S. D. · Int J Polym Sci · 2015
23. 10.1016/j.mtcomm.2018.07.00310.1016/j.mtcomm.2018.07.003 ↗
24. 10.1016/j.mechmat.2007.10.00610.1016/j.mechmat.2007.10.006 ↗
25. 10.1177/073168440934465110.1177/0731684409344651 ↗
26. Reddy M. I. · Int J Eng Res Technol · 2016 · 3 · 410
27. 10.1007/s10924-011-0410-510.1007/s10924-011-0410-5 ↗
28. 10.1002/app.3096010.1002/app.30960 ↗
29. 10.4028/www.scientific.net/KEM.694.2910.4028/www.scientific.net/KEM.694.29 ↗
30. 10.1002/pc.2305310.1002/pc.23053 ↗
31. 10.1016/j.compositesb.2013.09.02010.1016/j.compositesb.2013.09.020 ↗
32. 10.1016/j.compositesa.2007.04.01010.1016/j.compositesa.2007.04.010 ↗
33. 10.1080/15440478.2017.132026010.1080/15440478.2017.1320260 ↗
34. 10.1002/pc.1036310.1002/pc.10363 ↗
35. Uzay C. · Conf Int J Arts Sci · 2016 · 9 · 211
36. 10.1007/BF0055303510.1007/BF00553035 ↗
37. Van den Oever M. J. A. · Appl Macromol Chem · 1999 · 272 · 7110.1002/(SICI)1522-9505(19991201)272:1<71::AID-APMC71>3.0.CO;2-R ↗
38. Young C. K. · Bioresour · 2015 · 10 · 2597
39. 10.1016/S0266-3538(99)00166-910.1016/S0266-3538(99)00166-9 ↗
40. 10.1007/s12034-014-0045-y10.1007/s12034-014-0045-y ↗
41. 10.1177/002199831036426510.1177/0021998310364265 ↗
42. Rao K. V. S. · ARPN J Eng Appl Sci · 2018 · 11 · 253
43. 10.1016/j.compositesa.2013.03.01210.1016/j.compositesa.2013.03.012 ↗
44. 10.1021/ie048884910.1021/ie0488849 ↗
45. 10.1016/j.compositesb.2006.06.01010.1016/j.compositesb.2006.06.010 ↗
46. 10.1016/j.ijbiomac.2017.04.07410.1016/j.ijbiomac.2017.04.074 ↗
47. 10.1016/j.compositesb.2018.11.03910.1016/j.compositesb.2018.11.039 ↗
48. 10.1016/j.compositesa.2011.11.00110.1016/j.compositesa.2011.11.001 ↗
49. 10.1016/S0266-3538(02)00254-310.1016/S0266-3538(02)00254-3 ↗