journal article·2023-07Open access

Identifying the contributions of constituents to the fracture performance and failure mechanism of fiber metal laminate

Jipeng Zhang, Yue Wang, Wen Yang, Xiangjun Dai, Yuan Zhao, Guodong Fang

Polymer Composites· Volume 44· Issue 7

Abstract

Abstract Fiber metal laminate (FML) is a damage‐tolerant material that has gained special attention in the aircraft industry. To clarify the confusing contributions of constituents to the quasi‐static fracture performance and failure mechanism, six kinds of glass fiber reinforced aluminum laminates (Glare) were designed. Quasi‐static fracture tests were carried out to examine their crack resistance, stable crack extension, and residual strength. Moreover, postmortem characterizations were performed to reveal the macro and micro failure morphologies. It was found that the glass fiber reinforced polymer (GFRP) layers can positively contribute to Glare's quasi‐static fracture performance due to its in‐situ quasi‐brittle but not completely brittle fracture characteristics, which was shown by the special plateau formed on P–Δa curve of Glare, and by the improved crack resistance, longer critical crack length, and higher residual strength in Glare with higher content of GFRP. However, the enhancement achieved by increasing the volume fraction of GFRP was not as effective as by increasing the aluminum thickness, since thickening aluminum in a limited range could increase the fracture toughness and promote the delamination and fiber pull‐outs in Glare. To further identify the effect of the properties of the metal layer, a titanium‐reinforced Glare was designed and tested. It was found to transform the fracture process to be titanium dominant, which delayed the fracture of GFRP and meandered the fracture path, then resulted in superior quasi‐static fracture performance than the basic Glare.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Transportation and Vehicle Engineering Shandong University of Technology Zibo China

College of Engineering Zhejiang Normal University Jinhua China

National Key Laboratory of Science and Technology on Advanced Composites in Special Environments Harbin Institute of Technology Harbin China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Shandong Province

References (49)

Show source-provided references
1. 10.1007/978-94-010-0995-910.1007/978-94-010-0995-9 ↗
2. 10.1002/pc.2647410.1002/pc.26474 ↗
3. 10.1002/pc.2708210.1002/pc.27082 ↗
4. 10.1002/pc.2686710.1002/pc.26867 ↗
5. 10.1016/j.compstruct.2020.11336710.1016/j.compstruct.2020.113367 ↗
6. 10.1177/0021998322108809510.1177/00219983221088095 ↗
7. 10.1016/j.compositesb.2020.10830010.1016/j.compositesb.2020.108300 ↗
8. 10.1016/j.compscitech.2021.10906710.1016/j.compscitech.2021.109067 ↗
9. 10.1016/j.compositesa.2021.10655210.1016/j.compositesa.2021.106552 ↗
10. 10.1016/j.compstruct.2022.11534010.1016/j.compstruct.2022.115340 ↗
11. 10.1016/j.jmapro.2021.10.01710.1016/j.jmapro.2021.10.017 ↗
12. 10.1002/pc.2631810.1002/pc.26318 ↗
13. 10.1016/j.compositesb.2018.09.08510.1016/j.compositesb.2018.09.085 ↗
14. 10.1016/j.compstruct.2022.11547810.1016/j.compstruct.2022.115478 ↗
15. 10.1016/j.compstruct.2022.11546810.1016/j.compstruct.2022.115468 ↗
16. 10.1016/j.tws.2023.11057810.1016/j.tws.2023.110578 ↗
17. 10.1007/978-3-319-56227-810.1007/978-3-319-56227-8 ↗
18. Zheng XL · 2013
19. VermeerenCAJR.The Residual Strength of Fiber Metal Laminates. Ph.D. Dissertation Delft University of Technology;1995.
20. 10.1016/0013-7944(94)90036-110.1016/0013-7944(94)90036-1 ↗
21. RodiR AlderliestenR BenedictusR.An experimental approach to investigate detailed failure mechanism in fiber metal laminates. Proceedings of the 25th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity (ICAF 2009) Rotterdam.2009.
22. 10.1016/j.engfracmech.2010.02.01410.1016/j.engfracmech.2010.02.014 ↗
23. RodiR.The Residual Strength Failure Sequence in Fibre Metal Laminates. Ph.D. Dissertation Delft University of Technology;2012.
24. 10.1023/A:101125620253910.1023/A:1011256202539 ↗
25. Vries TJ · 2001
26. 10.1111/j.1460-2695.2004.00803.x10.1111/j.1460-2695.2004.00803.x ↗
27. MacheretJ BucciRJ KulakM.Metal plasticity and specimen size effects in the evaluation of ARALL laminates notched panel residual strength. Proceedings of the 8th European Conference on Fracture (ECF8) Torino.1990.
28. 10.1590/S1516-1439200200020000610.1590/S1516-14392002000200006 ↗
29. 10.1016/S0263-8231(03)00107-110.1016/S0263-8231(03)00107-1 ↗
30. 10.1016/S0013-7944(03)00138-310.1016/S0013-7944(03)00138-3 ↗
31. 10.1016/S0266-3538(96)00107-810.1016/S0266-3538(96)00107-8 ↗
32. 10.1016/S0022-5096(99)00011-310.1016/S0022-5096(99)00011-3 ↗
33. 10.1016/S0013-7944(02)00125-X10.1016/S0013-7944(02)00125-X ↗
34. ASTM E2472: · 2013
35. 10.1046/j.1460-2695.2002.00552.x10.1046/j.1460-2695.2002.00552.x ↗
36. 10.1002/pc.2719810.1002/pc.27198 ↗
37. 10.1016/j.engfracmech.2012.02.00110.1016/j.engfracmech.2012.02.001 ↗
38. 10.1016/j.engfracmech.2019.10686110.1016/j.engfracmech.2019.106861 ↗
39. 10.1016/j.engfracmech.2009.12.01710.1016/j.engfracmech.2009.12.017 ↗
40. 10.1016/j.msea.2006.12.13510.1016/j.msea.2006.12.135 ↗
41. 10.1016/j.compstruct.2017.11.01610.1016/j.compstruct.2017.11.016 ↗
42. 10.1016/j.compscitech.2009.12.01110.1016/j.compscitech.2009.12.011 ↗
43. 10.1007/s10704-020-00456-010.1007/s10704-020-00456-0 ↗
44. 10.1016/j.compstruct.2020.11263510.1016/j.compstruct.2020.112635 ↗
45. 10.1016/j.compositesa.2018.12.02710.1016/j.compositesa.2018.12.027 ↗
46. 10.1016/j.compstruct.2017.08.06710.1016/j.compstruct.2017.08.067 ↗
47. Jones RM · 1999
48. 10.1016/j.ijfatigue.2005.07.03010.1016/j.ijfatigue.2005.07.030 ↗
49. 10.1016/j.ijfatigue.2018.01.00910.1016/j.ijfatigue.2018.01.009 ↗