Thermal and fatigue failure properties of graphene oxide/acrylonitrile butadiene rubber composites: New perspectives on the role of interface and interphase
Source abstract
Abstract
Abstract Damages originating from self‐generated heat in rubbers with low thermal conductivity properties constitute a major share of failure in many rubber applications. There are still contradictory results concerning the direction through which the nanoscale phenomena including the interface strength, the interphase as a layer with slowed‐down dynamics, and the filler dispersion contribute to the thermal conductivity of nanocomposites. Thermal failure properties depend on the net effect of the interfacial phenomena on the thermal accumulation and conductivity. Two grades of NBR (Acrylonitrile–Butadiene Rubber) having various levels of Acrylonitrile (ACN) content were reinforced with Graphene oxide (GO) at low (0.5) and high (3) parts per hundred rubber (phr) to create the diverse range of polymer–filler and filler–filler interactions. Thermodynamically‐based indicators relying on the surface energy of the components were employed in conjunction with the experimental means (scanning electron microscopy) to quantify the degree of interface strength, the interphase, and the dispersion quality. Measuring the thermal conductivity properties of the prepared samples, it was found that NBR40 containing 3 phr of GO, while presenting the highest volume of interphase and interface strength, shows the maximum thermal accumulation. It was found that interphase had no negative effect on thermal conductivity, and thus NBR40 also exhibited maximum thermal conductivity. The combinatory effect of thermal accumulation and conductivity on failure was further monitored by performing a high‐frequency fatigue crack growth experiment. Highlights Evaluating role of interfacial phenomena on the thermal and fatigue failure Quantifying the degree of interface strength, the interphase and the dispersion Formation of interphase had no negative impact on the thermal conductivity Stiffness of interphase layer was found to be the cause of better conductivity Filler volume effects had a priority role on conductivity than surface effects
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Polymer Engineering Department, Faculty of Chemical Engineering Tarbiat Modares University Tehran Iran
Chemical, Polymeric and Petrochemical Technology Development Research Division Research Institue of Petroleum Industry Tehran Iran
Funding
Tarbiat Modares University
References (43)
Show source-provided references
1. 10.1021/acs.macromol.1c0093410.1021/acs.macromol.1c00934 ↗
2. VincentA CustoderoE.Tire provided with a tread comprising a thermoplastic elastomer. Google Patents.2017.
3. 10.1002/sus2.15910.1002/sus2.159 ↗
4. 10.1016/j.mechmat.2020.10346110.1016/j.mechmat.2020.103461 ↗
5. 10.1016/j.mser.2020.10056110.1016/j.mser.2020.100561 ↗
6. 10.5254/1.354760710.5254/1.3547607 ↗
7. 10.1088/0953-8984/17/44/R0110.1088/0953-8984/17/44/R01 ↗
8. 10.3144/expresspolymlett.2007.2110.3144/expresspolymlett.2007.21 ↗
9. 10.3139/978344642871310.3139/9783446428713 ↗
10. 10.1016/j.polymertesting.2021.10714010.1016/j.polymertesting.2021.107140 ↗
11. 10.1016/B978-0-443-18608-0.00010-310.1016/B978-0-443-18608-0.00010-3 ↗
12. Improvement in tear resistance and crack growth of Tire tread compound with effective cure systems and use of semi‐reinforcement fillers
13. 10.1111/ffe.1401610.1111/ffe.14016 ↗
14. 10.3390/polym1504089910.3390/polym15040899 ↗
15. 10.1016/0013-7944(73)90040-410.1016/0013-7944(73)90040-4 ↗
16. 10.1021/ma202044e10.1021/ma202044e ↗
17. 10.1016/j.compscitech.2008.06.00410.1016/j.compscitech.2008.06.004 ↗
18. 10.1016/j.polymer.2010.04.07410.1016/j.polymer.2010.04.074 ↗
19. Administration NHTS · 2020
20. 10.1016/j.engfracmech.2023.10904810.1016/j.engfracmech.2023.109048 ↗
21. 10.1016/j.polymer.2022.12559510.1016/j.polymer.2022.125595 ↗
22. 10.1016/j.matdes.2014.04.03610.1016/j.matdes.2014.04.036 ↗
23. 10.3390/polym1106098810.3390/polym11060988 ↗
24. ChouvelC Da SilvaJCA.Tire tread comprising a thermoplastic elastomer. Google Patents.2018.
25. ChouvelC.Tire provided with a tread comprising a diene elastomer and thermoplastic elastomer system. Google Patents.2020.
26. 10.1016/j.polymertesting.2021.10727410.1016/j.polymertesting.2021.107274 ↗
27. 10.1007/BF0058488110.1007/BF00584881 ↗
28. 10.1002/pol.1972.16010010410.1002/pol.1972.160100104 ↗
29. 10.1002/app.1318210.1002/app.13182 ↗
30. 10.1002/app.4064010.1002/app.40640 ↗
31. 10.1007/s10853-011-5846-410.1007/s10853-011-5846-4 ↗
32. KRÜSS.Application Note AN245e.
33. 10.1016/S0079‐6700(01)00040‐510.1016/S0079‐6700(01)00040‐5 ↗
34. 10.1016/j.est.2022.10506510.1016/j.est.2022.105065 ↗
35. KostioukVV BerlinII BorisovNN.Inverse Heat Conduction Problems: New Trends in Heat‐Transfer: VV Kostiouk II Berlin NN Borisov.
36. 10.1021/ma010626p10.1021/ma010626p ↗
37. 10.1021/ma302281b10.1021/ma302281b ↗
38. 10.1021/acs.iecr.2c0208910.1021/acs.iecr.2c02089 ↗
39. 10.1039/C8RA00405F10.1039/C8RA00405F ↗
40. 10.1016/S1359-0286(02)00073-610.1016/S1359-0286(02)00073-6 ↗
41. 10.1016/j.mtsust.2024.10068110.1016/j.mtsust.2024.100681 ↗
42. 10.1016/j.matdes.2016.11.06110.1016/j.matdes.2016.11.061 ↗
43. 10.1039/C7NR06780A10.1039/C7NR06780A ↗