journal article·2014-12

Microstructural variations of poly(vinylidene fluoride co-hexafluoropropylene) and their influence on the thermal, dielectric and piezoelectric properties

R.E. Sousa, J. Nunes-Pereira, J.C.C. Ferreira, C.M. Costa, A.V. Machado, M.M. Silva, S. Lanceros-Mendez

Polymer Testing· Volume 40
Publisher page

Abstract

Abstract Polymer films and membranes of poly(vinylidene fluoride co-hexafluoropropylene), PVDF-HFP, have been prepared by thermally induced phase separation (TIPS), allowing the tuning of microstructure and morphology. The obtained microstructure is explained by the Flory-Huggins theory, depending on polymer concentration and solvent evaporation temperature. The formation of a porous membrane is attributed to a spinodal decomposition of the liquid-liquid phase separation. The effect of the processing conditions on the morphology, degree of porosity, degree of crystallinity and crystalline polymorph, thermal, dielectric and piezoelectric properties of the PVDF-HFP polymer were evaluated. The crystalline phase and degree of crystallinity depend on the processing conditions and further influence the dielectric and piezoelectric response. The piezoelectric coefficient is correlated with the β-phase content and decreases with decreasing polymer concentration in the initial solution at a given evaporation temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Progress in the production and modification of PVDF membranes10.1016/j.memsci.2011.03.014 ↗
2. Phase separation processes in polymer solutions in relation to membrane formation10.1016/0376-7388(96)00088-9 ↗
3. Fruit Juice processing and membrane technology application10.1007/s12393-011-9042-8 ↗
4. Overview on nanostructured membrane in fuel cell applications10.1016/j.ijhydene.2010.11.062 ↗
5. PVDF-HFP-based porous polymer electrolyte membranes for lithium-ion batteries10.1016/j.jpowsour.2008.03.045 ↗
6. Preparation and characterization of electro-spun nanofiber membranes and their possible applications in water treatment10.1016/j.seppur.2012.09.037 ↗
7. Preparation and characterization of membranes formed by nonsolvent induced phase separation: a review10.1021/ie101928r ↗
8. Mulder · 1996
9. Membrane formation via thermally induced phase separation (TIPS): model development and validation10.1016/j.memsci.2005.11.036 ↗
10. Modeling of CO2 absorption in a membrane contactor considering solvent evaporation10.1016/j.seppur.2013.03.008 ↗
11. PEGylation of anti-biofouling polysulfone membranes via liquid- and vapor-induced phase separation processing10.1016/j.memsci.2012.02.019 ↗
12. Asymmetric membrane formation via immersion precipitation method. I. Kinetic effect10.1016/S0376-7388(00)81536-7 ↗
13. Formation of air-cast cellulose acetate membranes. Part I. Study of macrovoid formation10.1016/0376-7388(93)85053-Y ↗
14. Preparation and characterization of polyethersulfone microporous membrane via thermally induced phase separation with low critical solution temperature system10.1016/j.memsci.2013.03.004 ↗
15. Three-dimensional analysis of membrane formation via thermally induced phase separation by dissipative particle dynamics simulation10.1016/j.memsci.2013.02.018 ↗
16. Superhydrophobic modification of polyimide films based on gold-coated porous silver nanostructures and self-assembled monolayers10.1039/b608981j ↗
17. Equilibrium and thermodynamic studies on adsorption of BSA using PVDF microfiltration membrane10.1016/j.desal.2012.09.004 ↗
18. PVDF and HYFLON AD membranes: ideal interfaces for contactor applications10.1016/j.memsci.2007.05.004 ↗
19. Novel PVDF hollow fiber membranes for vacuum and direct contact membrane distillation applications10.1016/j.seppur.2013.04.040 ↗
20. Electroactive phases of poly(vinylidene fluoride): determination, processing and applications10.1016/j.progpolymsci.2013.07.006 ↗
21. The ionic conductivity and mechanical property of electrospun P(VdF-HFP)/PMMA membranes for lithium ion batteries10.1016/j.memsci.2008.12.024 ↗
22. Structure and ionic conductivity of porous polymer electrolytes based on PVDF-HFP copolymer membranes10.1016/j.memsci.2006.04.013 ↗
23. Preparation of PVDF–HFP microporous membrane for Li-ion batteries by phase inversion10.1016/j.memsci.2005.12.038 ↗
24. Effects of PVDF-HFP concentration on membrane distillation performance and structural morphology of hollow fiber membranes10.1016/j.memsci.2009.10.026 ↗
25. Ternary diagrams of poly(vinylidene fluoride) and poly[(vinylidene fluoride)-co-hexafluoropropene] in propylene carbonate and dimethyl sulfoxide10.1002/macp.201100595 ↗
26. Terminology for membrane distillation10.1016/0011-9164(89)80010-4 ↗
27. FTIR and DSC studies of mechanically deformed β-PVDF films10.1081/MB-100106174 ↗
28. Bassett · 1982
29. Evaluation of piezoelectric poly(vinylidene fluoride) polymers for use in space environments. I. Temperature limitations10.1002/polb.20436 ↗
30. Effect of salt additive on the formation of microporous poly(vinylidene fluoride) membranes by phase inversion from LiClO4/Water/DMF/PVDF system10.1016/S0032-3861(02)00731-0 ↗
31. Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase in the scope of the Avrami equation10.1007/s10853-009-4086-3 ↗
32. Preparation and characterization of porous PVdF-HFP/clay nanocomposite membranes10.1016/S1005-0302(10)60098-9 ↗
33. Formation mechanism and crystallization of poly(vinylidene fluoride) membrane via immersion precipitation method10.1016/j.desal.2007.10.064 ↗
34. The role of solvent evaporation in the microstructure of electroactive β-poly(vinylidene fluoride) membranes obtained by isothermal crystallization10.1080/1539445X.2010.525442 ↗
35. Surface pore structures of micro- and ultrafiltration membranes imaged with the atomic force microscope10.1016/0376-7388(92)87057-5 ↗
36. Surface modification of PVDF porous membranes via poly(DOPA) coating and heparin immobilization10.1016/j.colsurfb.2008.11.011 ↗
37. Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering10.1039/c3ra43499k ↗
38. Studies on poly(vinylidene fluoride-co-hexafluoropropylene) based gel electrolyte nanocomposite for sodium–sulfur batteries10.1016/j.ssi.2011.09.001 ↗
39. Nanoparticulate AlO(OH)[sub n] filled polyvinylidenefluoride-co-hexafluoropropylene based microporous membranes for lithium ion batteries10.1063/1.3122671 ↗
40. BMIMTf ionic liquid-assisted ionic dissociation of MgTf in P(VdF-HFP)-based solid polymer electrolytes10.1016/j.jpcs.2013.04.017 ↗
41. The effects of quenching on the phase structure of vinylidene fluoride segments in PVDF-HFP copolymer and PVDF-HFP/PMMA blends10.1007/s10853-005-2182-6 ↗
42. Polyvinylidene fluoride–hexafluoropropylene (PVdF–HFP)-based composite polymer electrolyte containing LiPF3(CF3CF2)310.1016/j.jnoncrysol.2008.03.009 ↗
43. Preparation and characterization of PVDF-HFP/MG49 based polymer blend electrolyte10.1016/S1452-3981(23)15740-3 ↗
44. Li-ion conduction on nanofiller incorporated PVdF-co-HFP based composite polymer blend electrolytes for flexible battery applications10.1016/j.ssi.2012.04.029 ↗
45. Influence of the solvent evaporation rate on the crystalline phases of solution-cast poly(vinylidene fluoride) films10.1002/app.31488 ↗
46. Crystal-structure dependence of electroactive properties in differently prepared poly(vinylidene fluoride/hexafluoropropylene) copolymer films10.1002/polb.10035 ↗
47. Poly(vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties10.1016/j.eurpolymj.2006.12.033 ↗
48. Orientation effects on dielectric and piezoelectric properties of polyvinylidene fluoride films10.1109/TEI.1986.349103 ↗
49. Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy10.1140/epje/i2012-12041-x ↗
50. Dielectric loss of poly(vinylidene fluoride) at low temperatures and effect of poling on the low temperature loss10.1080/00150198108238671 ↗
51. Kremer · 2003
52. Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride)10.1088/0964-1726/19/6/065010 ↗
53. Micro and nanofilms of poly(vinylidene fluoride) with controlled thickness, morphology and electroactive crystalline phase for sensor and actuator applications10.1088/0964-1726/20/8/087002 ↗
54. Variations in polymeric structure of ferroelectric poly(vinylidene fluoride) films during annealing at various temperatures10.1002/app.29323 ↗
55. Improving the optical and electroactive response of poly(vinylidene fluoride–trifluoroethylene) spin-coated films for sensor and actuator applications10.1088/0964-1726/21/8/085020 ↗
56. Contribution of the irreversible displacement of domain walls to the piezoelectric effect in barium titanate and lead zirconate titanate ceramics
57. Phase transition and properties of a ferroelectric poly(vinylidene fluoride-hexafluoropropylene) copolymer10.1063/1.1862323 ↗
58. Simultaneous stretching and static electric field poling of poly(vinylidene fluoride-hexafluoropropylene) copolymer films10.1002/pen.20843 ↗
59. A simple approach to polymer mixture miscibility10.1098/rsta.2009.0215 ↗
60. Rubinstein · 2003
61. Barton · 1991
62. Poly(vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP) membranes for ethyl acetate removal from water10.1016/j.jhazmat.2007.08.029 ↗