journal article·2018-10

Stepwise exfoliation of bound rubber from carbon black nanoparticles and the structure characterization

Pan Song, Chaoying Wan, Yanling Xie, Zhen Zhang, Shifeng Wang

Polymer Testing· Volume 71
Publisher page

Abstract

Abstract The covalently crosslinking structure between rubber matrix and carbon black (CB) fillers present a significant challenge to analyze the structure and properties of bound rubber in vulcanizate. This work provides a layered exfoliation method to destruct cross-linked network and separate bound rubber encapsulated CB particles out of vulcanizate. A layer of loosely bound rubber was observed by using transmission electron microscopy (TEM), and the existence of tightly bound rubber layer was proved by thermogravimetric analyzer (TGA), atomic force microscopic (AFM) and dispersion experiment. The chemical components of studied layers were further analyzed by using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), where the detection of S, N and Zn elements indicated the vulcanization reaction occurred in it, and the content of polysulfide and disulfide bonds was higher than that of monosulfide. The existence of oxygenic groups is resulted from the occurrence of oxidative scission reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Nano and microcomposites of polymers elastomers and their reinforcement10.1016/S0266-3538(03)00028-9 ↗
2. Reinforcement of elastomers
3. Carbon black-rubber interactions and bound rubber10.5254/1.3540401 ↗
4. EPDM−Carbon Black interactions and the reinforcement mechanisms, as studied by Low-Resolution 1H NMR10.1021/ma9910080 ↗
5. Carbon black–polymer interaction: a measure of reinforcement10.1002/app.1964.070080615 ↗
6. Reinforcement of model filled elastomers: characterization of the cross-linking density at the filler–elastomer interface by 1 H NMR measurements10.1016/S0032-3861(02)00882-0 ↗
7. Time scales in the reinforcement of elastomers10.1016/j.polymer.2005.02.060 ↗
8. Rubber–Filler interactions and network structure in relation to stress–strain behavior of vulcanized, carbon black filled EPDM10.1021/ma2007255 ↗
9. Nanoscale visualization and multiscale mechanical implications of bound rubber interphases in rubber–carbon black nanocomposites10.1039/C0SM00645A ↗
10. Rubber–filler interactions and rheological properties in filled compounds10.1016/S0079-6700(01)00040-5 ↗
11. Carbon black filled natural rubber. 1. Structural investigations10.1021/ma00002a015 ↗
12. Study on surface activity of high-structure DZ13 nano-carbon black10.1166/nnl.2014.1612 ↗
13. Rubber-extender interactions surface activity of fillers and filler/rubber interactions
14. Analysis of the interaction between rubber polymer and carbon black surfaces by efficient removal of physisorbed polymer from carbon-rubber composites10.1016/j.carbon.2015.12.003 ↗
15. Sorption of GR-S type of polymer on carbon black. III. Sorption by commercial blacks10.5254/1.3539784 ↗
16. Bound rubber and carbon black reinforcement10.5254/1.3538213 ↗
17. Bound rubber in elastomers: analysis of elastomer-filler interaction and its effect on viscosity and modulus of composite systems10.1002/app.1972.070160217 ↗
18. Filler-elastomer Interactions. Part VII. study on bound rubber10.5254/1.3538304 ↗
19. Studies on the structure and formation mechanism of carbon gel in the carbon black filled polyisoprene rubber composite10.1002/(SICI)1097-4628(19960822)61:8<1345::AID-APP15>3.0.CO;2-Y ↗
20. Vegetable derived-oil facilitating carbon black migration from waste tire rubbers and its reinforcement effect10.1016/j.wasman.2018.05.054 ↗
21. Liquefaction of ground tire rubber at low temperature10.1016/j.wasman.2017.10.004 ↗
22. Recycling the nanostructured carbon from waste tires10.1016/j.coco.2017.12.001 ↗
23. Modified soybean oil-extended SBR compounds and vulcanizates filled with carbon black10.1016/j.polymer.2015.01.028 ↗
24. Soybean oil plasticizers as replacement of petroleum oil in rubber10.5254/rct.13.87992 ↗
25. Separation of core-shell structured carbon black nanoparticles from waste tires by light pyrolysis10.1016/j.compscitech.2016.09.009 ↗
26. Surface fractal dimension of graphitized carbon black particles10.1016/0008-6223(96)00180-7 ↗
27. Lithium storage in nitrogen-rich mesoporous carbon materials10.1039/c2ee21817h ↗
28. Synthesis of porous ZnS, ZnO and ZnS/ZnO nanosheets and their photocatalytic properties10.1039/C7RA03243A ↗
29. Effect of styrene butadiene rubber on the light pyrolysis of the natural rubber10.1016/j.polymdegradstab.2017.12.006 ↗
30. Thermal ageing behavior of styrene–butadiene random copolymer: a study on the ageing mechanism and relaxation properties10.1016/j.polymdegradstab.2012.06.015 ↗
31. Data for effects of lanthanum complex on the thermo-oxidative aging of natural rubber
32. Bound polymer layer in nanocomposites10.1021/mz300646a ↗
33. Characterization of pyrolytic carbon blacks from commercial tire pyrolysis plants10.1016/0008-6223(95)00096-V ↗
34. Electrospinning and alignment of polyaniline‐based nanowires and nanotubes10.1002/pen.20969 ↗
35. Microbial scission of sulfide linkages in vulcanized natural rubber by a white rot basidiomycete, ceriporiopsis subvermispora10.1021/bm034368a ↗
36. Sulfur-containing carbon by flame synthesis as efficient metal-free electrocatalyst for oxygen reduction reaction10.1016/j.elecom.2013.01.023 ↗
37. Mechanisms of surfactant adsorption on non-polar, air-oxidized and ozone-treated carbon surfaces10.1016/S0008-6223(03)00053-8 ↗
38. Desulfurization of coal: the microbial solution10.1016/0167-7799(89)90007-3 ↗