ABA triblock copolyesters composed of poly(l-lactide) A hard blocks: A comparative study of amorphous and crystalline aliphatic polyesters as B soft blocks
Source abstract
Abstract
Abstract In this article, two series of ABA triblock copolyesters composed of poly( l -lactide) A hard blocks and odd-odd aliphatic polyesters as B soft midblock were prepared and compared by various techniques. The results showed that the block structures could be formed without any detectable transesterification, and the composition and molecular weight of the triblock copolyesters could be well controlled by adjusting the feeding ratio of l -lactide monomer to the polyester macroinitiator. It was found that the thermal properties, crystal structure, and spherulitic morphology of the triblock copolyesters depended on the composition and block length. The impact of amorphous and crystalline midblocks on the mechanical properties was compared and discussed. The triblock copolyesters composed of crystalline midblock showed similar ultimate stress and elongation, but higher tensile modulus and yield stress, in comparison with analogous containing amorphous midblock. The triblock copolyester composed of short PLLA hard block and amorphous aliphatic polyester soft midblock displayed typical elastomeric behavior without yield, which is a promising aliphatic polyester thermoplastic elastomer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Carbon dioxide utilization in catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Recent advances in thermoplastic elastomers from living polymerizations: macromolecular architectures and supramolecular chemistry10.1016/j.progpolymsci.2019.04.002 ↗
2. Biobased building blocks for the rational design of renewable block polymers10.1039/C4SM01220H ↗
3. Material design and manufacture of a new thermoplastic polyester elastomer10.1295/polymj.PJ2007124 ↗
4. Synthesis, preparation, in vitro degradation, and application of novel degradable bioelastomers-A review10.1016/j.progpolymsci.2011.11.001 ↗
5. Aliphatic polyesters: synthesis, properties and applications10.1007/3-540-45734-8_1 ↗
6. Properties of lactic acid based polymers and their correlation with composition10.1016/S0079-6700(02)00012-6 ↗
7. Present situation and future perspectives of poly(lactic acid)
8. Temperature-dependent polymorphic crystallization of poly(L-lactide)s on the basis of optical purity and microstructure10.1016/j.polymer.2017.11.069 ↗
9. Aliphatic polyester block polymers: renewable, degradable, and sustainable10.1021/ar500121d ↗
10. Synthesis and characterization of polylactide-block-polyisoprene-block- polylactide triblock copolymers: new thermoplastic elastomers containing biodegradable segments10.1002/1521-3927(20001201)21:18<1317::AID-MARC1317>3.0.CO;2-B ↗
11. Mild synthesis of environment-friendly thermoplastic triblock copolymer elastomers through combination of ring-opening and RAFT polymerization10.1039/C9PY00654K ↗
12. Enhanced impact properties of polylactide by poly(lactide-b-butadiene-b-lactide) triblock copolymer10.1007/s13233-011-0906-9 ↗
13. Synthesis of poly(L-lactide)-block-polyisobutylene-block-poly(L-lactide): a new biodegradable thermoplastic elastomer10.1002/marc.1995.030161209 ↗
14. Fully biobased thermoplastic elastomers synthesis and characterization of poly(L-lactide)-b-polymyrcene-b-poly(L-lactide) triblock copolymers10.1039/C6RA08689F ↗
15. Strong, resilient, and sustainable aliphatic polyester thermoplastic elastomers10.1021/acs.biomac.7b00283 ↗
16. Aliphatic polyester block polymer design10.1021/acs.macromol.6b00211 ↗
17. Resorbable and highly elastic block copolymers from 1,5-dioxepan-2-one and L-lactide with controlled tensile properties and hydrophilicity10.1021/bm015658z ↗
18. Preparation and properties of poly(L-lactide)-block-poly(trimethylene carbonate) as biodegradable thermoplastic elastomer10.1295/polymj.34.203 ↗
19. Triblock copolymers based on 1,3-trimethylene carbonate and lactide as biodegradable thermoplastic elastomers10.1002/macp.200300184 ↗
20. Macromolecular engineering via ring-opening polymerization (1): L-lactide/trimethylene carbonate block copolymers as thermoplastic elastomers10.1039/C2PY20859H ↗
21. Effect of poly(L-lactide) chain length on microstructural and thermomechanical properties of poly(L-lactide)-b-poly(butylene carbonate)-b-poly(L-lactide) triblock copolymers10.1016/j.polymer.2017.07.014 ↗
22. Influence of aliphatic polycarbonate middle block on mechanical and microstructural behaviour of triblock copolymers based on poly(L-lactide) and polycarbonate10.1002/pi.5723 ↗
23. Renewable resource thermoplastic elastomers based on polylactide and polymenthide10.1021/bm700699g ↗
24. Consequences of polylactide stereochemistry on the properties of polylactide-polymenthide-polylactide thermoplastic elastomers10.1021/bm900721p ↗
25. Thermoset elastomers covalently crosslinked by hard nanodomains of triblock copolymers derived from carvomenthide and lactide: tunable strength and hydrolytic degradability10.1039/C8PY01765D ↗
26. Polylactide-poly(6-methyl-ε-caprolactone)-polylactide thermoplastic elastomers10.1021/ma201063t ↗
27. Scalable production of mechanically tunable block polymers from sugar10.1073/pnas.1404596111 ↗
28. Synthesis and characterization of hydroxy-terminated [RS]-poly(3-hydroxybutyrate) and its utilization to block copolymerization with L-lactide to obtain a biodegradable thermoplastic elastomer10.1016/S0032-3861(00)00086-0 ↗
29. Tuning thermal properties and microphase separation in aliphatic polyester ABA copolymers10.1039/C4PY01459F ↗
30. ε-Decalactone: a thermoresilient and toughening comonomer to poly(L-lactide)10.1021/bm400733e ↗
31. A-B-A-Triblock and multiblock copolyesters prepared from ε-caprolactone, glycolide and L-lactide by means of bismuth subsalicylate10.1016/j.polymer.2005.02.004 ↗
32. Resilient bioresorbable copolymers based on trimethylene carbonate, L-lactide, and 1,5-Dioxepan-2-one10.1021/bm060081c ↗
33. Triblock copolymers of ε-caprolactone, trimethylene carbonate, and L-lactide: effects of using random copolymer as hard-block10.1016/j.jmbbm.2011.11.001 ↗
34. Biodegradable elastomers based on ABA triblocks: influence of end-block crystallinity on elastomeric character10.1002/pi.3130 ↗
35. ABA-type thermoplastic elastomers composed of poly(ε-caprolactone-co-δ-valerolactone) soft midblock and polymorphic poly(lactic acid) hard end blocks10.1021/acssuschemeng.5b00855 ↗
36. Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers10.1039/C5PY00202H ↗
37. Synthesis of biodegradable thermoplastic elastomers from ε-caprolactone and lactide10.1002/pola.27463 ↗
38. Synthesis and properties of biodegradable supramolecular polymers based on polylactide-block-poly(δ-valerolactone)-block-polylactide triblock copolymers10.1002/pi.5404 ↗
39. Syntheses and physical characterization of new aliphatic triblock poly(l-lactide-b-butylene succinate-b-l-lactide)s bearing soft and hard biodegradable building blocks10.1021/bm034235p ↗
40. Synthesis of PLLA-based block copolymers for improving melt strength and toughness of PLLA by in situ reactive blending10.1016/j.polymdegradstab.2016.11.022 ↗
41. Screening of metal catalysts influence on the synthesis, structure, properties, and biodegradation of PLA-PBA triblock copolymers obtained in melt10.1002/pola.27576 ↗
42. Influence of block composition on structural, thermal and mechanical properties of novel aliphatic polyester based triblock copolymers10.1016/j.polymer.2012.08.025 ↗
43. Fully bio-based poly(L-lactide)-b- poly(ricinoleic acid)-b-poly(L-lactide) triblock copolyesters: investigation of solid-state morphology and thermo-mechanical properties10.1039/c3py00300k ↗
44. Fully biobased triblock copolyesters from L-lactide and sulfur-containing castor oil derivatives: preparation, oxidation and characterization10.1016/j.polymer.2015.05.013 ↗
45. Triblock copolyesters derived from lactic acid and glucose: synthesis, nanoparticle formation and simulation10.1016/j.eurpolymj.2017.04.033 ↗
46. Hydroxyl-functionalized amphiphilic triblock copolyesters made of tartaric and lactic acids: synthesis and nanoparticle formation10.1016/j.reactfunctpolym.2018.03.007 ↗
47. PLA-PBAT-PLA tri-block copolymers: effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends10.1016/j.polymdegradstab.2017.11.012 ↗
48. Design of biobased PLLA triblock copolymers for sustainable food packaging: thermo-mechanical properties, gas barrier ability and compostability10.1016/j.eurpolymj.2017.08.001 ↗
49. Isodimorphic aliphatic copolyester as midblock of poly(l-lactide)-based triblock copolymers towards largely enhanced impact toughness10.1016/j.eurpolymj.2018.12.010 ↗
50. Aliphatic poly(propylene dicarboxylate)s: effect of chain length on thermal properties and crystallization kinetics10.1016/j.polymer.2007.04.007 ↗
51. Correlation between chemical and solid-state structures and enzymatic hydrolysis in novel biodegradable polyesters. The case of poly(propylene alkanedicarboxylate)s10.1002/mabi.200800035 ↗
52. Neopenthyl glycol containing poly(propylene azelate)s: synthesis and thermal properties10.1016/j.eurpolymj.2007.06.011 ↗