A methodology for the design, fabrication and testing of axially graded polymeric structures with tailored vibration characteristics
Source abstract
Abstract
Machinery subject to internal and/or external mechanical excitations typically require careful control or avoidance of undesirable vibration behavior to meet operational constraints. To address this difficulty, the design, fabrication and testing of multi-polymer axially graded (segmented) structures fabricated through 3D printing was performed. Experiments were conducted on axially graded beams composed of four different polymers in a linear spatial arrangement. The ability to combine multiple materials through additive manufacturing affords the ability to create graded structures that can meet specific performance metrics: higher damping at the desired vibration modes and greater modal separation has been successfully demonstrated. The significance of this work is vested in the fact that the proposed technique can enable the development of tuned structures which can deliver desired spectral characteristics. Furthermore, strength, stability (e.g. buckling) as well as vibrational targets in the design of machinery can be met simultaneously using axial grading of materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Vibration control in machines and structures using viscoelastic damping10.1006/jsvi.1997.1317 ↗
2. Multifunctional material systems: a state-of-the-art review10.1016/j.compstruct.2016.01.028 ↗
3. Vibration analysis of timoshenko beams with non-homogeneity and varying cross-section10.1006/jsvi.1995.0490 ↗
4. Free vibrations of non-uniform and axially functionally graded beams using Haar wavelets10.1016/j.engstruct.2011.08.006 ↗
5. Apparently first closed-form solution for vibrating: inhomogeneous beams10.1016/S0020-7683(00)00266-3 ↗
6. Can a trigonometric function serve both as the vibration and the buckling mode of an axially graded structure?10.1081/SME-200028002 ↗
7. Analytical polynomial solutions for vibrating axially graded beams10.1080/15376490490452669 ↗
8. Stability of a slender beam-column with locally varying Young's modulus
9. Buckling of functionally graded and elastically restrained non-uniform columns10.1016/j.compositesb.2009.03.001 ↗
10. Material tailoring in finite torsional deformations of axially graded Mooney-Rivlin circular cylinder10.1177/1081286514544260 ↗
11. Radially and axially graded multizonal bone graft substitutes targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate10.1089/ten.tea.2011.0625 ↗
12. Free and forced vibration characteristics of axially graded multifunctional viscoelastic beams
13. Vibration performance of axially graded polymeric viscoelastic beams
14. Overview of current additive manufacturing technologies and selected applications10.3184/003685012X13420984463047 ↗
15. Fabrication of functionally graded materials via Inkjet color printing10.1111/j.1551-2916.2006.01206.x ↗
16. A comprehensive analysis of functionally graded sandwich plates: Part 1-Deflection and stresses
17. Deflections, stresses and free vibration studies of FG-CNT reinforced sandwich plates resting on pasternak elastic foundation
18. A four-unknown refined plate theory for dynamic analysis of FG-sandwich plates under various boundary conditions
19. Bending analysis of functionally graded porous plates via a refined shear deformation theory
20. A new innovative 3-unknowns hsdt for buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions
21. A novel four-unknown integral model for buckling response of fg sandwich plates resting on elastic foundations under various boundary conditions using galerkin's approach
22. Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation
23. Buckling and dynamic behavior of the simply supported CNT-RC beams using an integral-first shear deformation theory
24. Analytical modeling of bending and vibration of thick advanced composite plates using a four-variable quasi 3D HSDT10.1007/s00366-019-00732-1 ↗
25. Influence of boundary conditions on the bending and free vibration behavior of FGM sandwich plates using a four-unknown refined integral plate theory
26. Free vibration investigation of FG nanoscale plate using nonlocal two variables integral refined plate theory
27. A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: bending and free vibration analysis
28. Investigation on hygro-thermal vibration of P-FG and symmetric S-FG nanobeam using integral Timoshenko beam theory
29. Effects of hygro-thermo-mechanical conditions on the buckling of FG sandwich plates resting on elastic foundations
30. A simple nth-order shear deformation theory for thermomechanical bending analysis of different configurations of FG sandwich plates
31. A four variable trigonometric integral plate theory for hygro-thermo-mechanical bending analysis of AFG ceramic-metal plates resting on a two-parameter elastic foundation
32. A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel
33. Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM
34. A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method
35. Evolutionary natural frequency optimization of thin plate bending vibration problems
36. Discrete model analysis of optimal columns10.1016/j.ijsolstr.2007.04.010 ↗
37. Experimental and analytical approach of fatigue behavior of stepped CK45 shaft with adjacent key groove10.1016/j.prostr.2018.09.040 ↗
38. Effect of moisture on shape memory polyurethane polymers for extrusion-based additive manufacturing10.3390/ma12020244 ↗
39. Influence of PLA filament conditions on characteristics of FDM parts10.3390/ma11081322 ↗
40. Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling10.1108/RPJ-03-2017-0046 ↗
41. Friction welding for functional prototypes of PA6 and ABS with Al powder reinforcement
42. Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts10.1016/j.compositesa.2018.09.008 ↗
43. Mechanical properties of interfaces in inkjet 3D printed single- and multi-material parts, 3D print
44. Brandt
45. Avitabile
46. Eigenvalue and eigenvector computation for discrete and continuous structures composed of viscoelastic materials10.1016/j.ijmecsci.2016.03.009 ↗
47. Free and forced vibration characteristics of axially graded multifunctional viscoelastic beams
48. Free vibration and physical parameter identification of non-uniform composite beams10.1016/j.compstruct.2005.03.015 ↗
49. Mode classification and dynamic analysis of coupled “Motor-compressor-flexible-foundation” structures
50. API standard paragraphs rotordynamic tutorial: lateral critical speeds, unbalance response, stability, train torsionals, and rotor balancing