journal article·2021-05

Analytical and numerical investigation of wrinkling limit diagram in deep drawing of two-layer sheets with experimental verification

AH Bamdad, R Hashemi

Publisher page

Abstract

Wrinkling, which is primarily caused by insufficient blank holder force, is a significant issue that induces inconsistencies in forming parts, particularly in the deep drawing process. In this article, an investigation of the wrinkling in the deep drawing process of two-layer sheets is performed through an analytical approach, numerical method, and experimental tests. Increasing in the blank holder force, the process is under control by the proposed algorithm. Consequently, it aims to find the minimum required blank holder force to avoid wrinkling. The energy technique is utilized to predict the wrinkling in the analytical approach. Similarly, finite element simulations are implemented to investigate the effect of forming parameters on wrinkling. The experimental tests are performed to verify the analytical and numerical results. The impact of the material properties and stacking sequences (lay-up) on blank holder force and forming force are studied. Results show that the optimum blank holder force is dependent on the material properties, blank geometry, and layer stacking sequences. Also, a good agreement between analytical, numerical, and experimental results is achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Vibration and Dynamic Analysis · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

References (42)

Show source-provided references
1. 10.1016/j.cja.2015.09.00410.1016/j.cja.2015.09.004 ↗
2. 10.1016/j.engfailanal.2019.10433910.1016/j.engfailanal.2019.104339 ↗
3. 10.1002/zamm.1928008050210.1002/zamm.19280080502 ↗
4. 10.1016/0022-5096(56)90032-110.1016/0022-5096(56)90032-1 ↗
5. 10.1016/0020-7403(82)90036-410.1016/0020-7403(82)90036-4 ↗
6. 10.1016/j.ijmecsci.2015.10.00210.1016/j.ijmecsci.2015.10.002 ↗
7. 10.1016/j.ijmecsci.2016.10.02310.1016/j.ijmecsci.2016.10.023 ↗
8. 10.1016/S0065-2156(08)70031-010.1016/S0065-2156(08)70031-0 ↗
9. Hutchinson J · Plast Instab · 1985 · 9 · 71
10. 10.1016/j.scient.2011.03.02010.1016/j.scient.2011.03.020 ↗
11. 10.1016/j.jmatprotec.2011.05.02610.1016/j.jmatprotec.2011.05.026 ↗
12. 10.1115/1.279150510.1115/1.2791505 ↗
13. 10.1016/S0020-7403(99)00078-810.1016/S0020-7403(99)00078-8 ↗
14. 10.1016/j.jmatprotec.2004.04.02810.1016/j.jmatprotec.2004.04.028 ↗
15. 10.1007/s12289-014-1187-610.1007/s12289-014-1187-6 ↗
16. 10.1177/146442071664279410.1177/1464420716642794 ↗
17. Joshi A · Int J Eng Res Technol · 2013 · 2 · 1
18. 10.1016/S1003-6326(12)61714-210.1016/S1003-6326(12)61714-2 ↗
19. 10.1007/s00170-015-7385-710.1007/s00170-015-7385-7 ↗
20. 10.1007/s12289-015-1265-410.1007/s12289-015-1265-4 ↗
21. 10.1016/j.ijmecsci.2016.03.01110.1016/j.ijmecsci.2016.03.011 ↗
22. 10.1016/j.cirp.2016.04.06010.1016/j.cirp.2016.04.060 ↗
23. 10.1016/j.jmatprotec.2010.06.00410.1016/j.jmatprotec.2010.06.004 ↗
24. 10.1007/s00170-010-2931-910.1007/s00170-010-2931-9 ↗
25. 10.1016/j.matdes.2015.07.06110.1016/j.matdes.2015.07.061 ↗
26. 10.1016/j.compositesb.2012.10.02310.1016/j.compositesb.2012.10.023 ↗
27. Takalkar AS · Proc IMechE, Part L: J Materials: Design and Applications · 2020
28. Ding Z · Int J Lightweight Mater Manuf · 2021 · 4 · 110
29. 10.1017/CBO978051154714010.1017/CBO9780511547140 ↗
30. Timoshenko SP · 1959
31. 10.1179/mtlr.1960.5.1.34910.1179/mtlr.1960.5.1.349 ↗
32. Jähnig T · Final Project Report, Dry Met. Forming OAJ
33. Timoshenko SP · 1961
34. 10.1016/j.jmapro.2017.11.00910.1016/j.jmapro.2017.11.009 ↗
35. 10.1016/j.ijmecsci.2016.08.01110.1016/j.ijmecsci.2016.08.011 ↗
36. 10.1115/1.403471710.1115/1.4034717 ↗
37. 10.1016/j.jmatprotec.2020.11683510.1016/j.jmatprotec.2020.116835 ↗
38. 10.1016/j.ijmecsci.2019.10505410.1016/j.ijmecsci.2019.105054 ↗
39. 10.1016/j.finel.2019.06.00410.1016/j.finel.2019.06.004 ↗
40. 10.1088/2053-1591/ab51c810.1088/2053-1591/ab51c8 ↗
41. 10.1080/09276440.2020.172251910.1080/09276440.2020.1722519 ↗
42. ASTM E8-01:2001. Standard test methods for tension testing of metallic materials. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM, 2001.