journal article·2016-02

The effects of die geometry in tube channel pressing: Severe plastic deformation

MH Farshidi, M Kazeminezhad

Publisher page

Abstract

The effects of die geometry on the deformation behavior of aluminum 6061 alloy tube in a novel severe plastic deformation (SPD) process called tube channel pressing (TCP) were studied using the Abaqus 6.10 software. Using the optimized die geometry, 1 to 3 passes of TCP is imposed not only to validate the simulation results, but also to investigate the performance of TCP as a SPD process. The finite element method (FEM) simulation results show that the moderated plastic strain, the lower inhomogeneity in distribution of plastic strain, and the lower risk of fracture during process can be obtained using the proper die geometry. In addition, the imposed strain is a mixture of shear strain and hoop strain accompanying with little bending strain which makes it relatively different from conventional SPD processes. Experiments shows that the experimentally obtained load–displacement curve of TCP is very close to its FEM predicted counterpart which validates the FEM simulation results. Additionally, after imposing of 3 passes of TCP to 6061 alloy, the grain size of the tube is decreased from a few tens of microns to less than 1 µm while the yield strength is increased from 110 MPa to 325 MPa which show the capability of TCP as a SPD process for tubes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran

References (21)

Show source-provided references
1. 10.1016/j.actamat.2012.10.03810.1016/j.actamat.2012.10.038 ↗
2. Segal VM, Rereznikov VI, Drobyshebskiy AE, . Plastic working of metals by simple shear. Russ Metall 1981; 1: 99–105.
3. 10.1016/0921-5093(91)90316-F10.1016/0921-5093(91)90316-F ↗
4. 10.1016/S1359-6462(99)00015-910.1016/S1359-6462(99)00015-9 ↗
5. 10.1016/j.jmatprotec.2005.10.02410.1016/j.jmatprotec.2005.10.024 ↗
6. 10.1016/j.scriptamat.2008.09.02910.1016/j.scriptamat.2008.09.029 ↗
7. 10.1016/j.msea.2010.08.08110.1016/j.msea.2010.08.081 ↗
8. 10.1016/j.msea.2011.03.01210.1016/j.msea.2011.03.012 ↗
9. 10.1007/s11665-012-0155-x10.1007/s11665-012-0155-x ↗
10. 10.1243/14644207JMDA16610.1243/14644207JMDA166 ↗
11. 10.1016/j.commatsci.2013.07.00610.1016/j.commatsci.2013.07.006 ↗
12. 10.1243/09544054JEM171310.1243/09544054JEM1713 ↗
13. 10.1016/S1359-6454(98)00196-710.1016/S1359-6454(98)00196-7 ↗
14. Voce E. A practical strain-hardening function. Metallurgica 1955; 51: 219–226.
15. 10.1007/s00170-009-2239-910.1007/s00170-009-2239-9 ↗
16. 10.1016/j.pmatsci.2006.06.00110.1016/j.pmatsci.2006.06.001 ↗
17. 10.1016/j.ijplas.2010.04.00110.1016/j.ijplas.2010.04.001 ↗
18. 10.1016/j.msea.2011.09.05710.1016/j.msea.2011.09.057 ↗
19. Murashkin MY, Bobruk EV, Kilmametov AR, . Structure and mechanical properties of aluminum alloy 6061 subjected to equal-channel angular pressing in parallel channels. Strength Plasticity 2009; 108: 439–447.
20. 10.1016/j.msea.2007.10.06910.1016/j.msea.2007.10.069 ↗
21. Loucif A Figueiredo RB Baudin T et al. Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion. Mater Sci Eng A 2010; 527: 4864–4869.10.1016/j.msea.2010.04.027 ↗