Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights
Source abstract
Abstract
Incremental sheet forming is a specific group of sheet forming methods that enable the manufacture of complex parts utilizing computer numerical control instead of specialized tools. It is an incredibly adaptable operation that involves minimal usage of sophisticated tools, dies, and forming presses. Besides its main application in the field of rapid prototyping, incremental sheet forming processes can be used for the manufacture of unique parts in small batches. The goal of this study is to broaden the knowledge of the deformation process in single-point incremental forming. This work studies the deformation behavior in single-point incremental forming by experimentally investigating the principal stresses, principal strains, and thinning of single-point incremental forming products. Conical-shaped components are fabricated using AA1050-H14 aluminum alloy at various combinations of fundamental variables. The factorial design is employed to plan the experimental study and analysis of variance is conducted to analyze the results. The grey relational analysis approach coupled with entropy weights is also implemented to identify optimum process variables for single-point incremental forming. The results show that the tool diameter has the greatest effect on the thinning of the SPIF product, followed by the sheet thickness, step size, and feed rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Industrial Engineering Department, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Private Consultants, Cairo, Egypt
Advanced Manufacturing Institute, King Saud University, Riyadh, Saudi Arabia
Department of Mechanical Engineering, College of Engineering, Al-Azhar University, Cairo, Egypt
Funding
Deanship of Scientific Research, King Saud University
References (43)
Show source-provided references
1. 10.1007/s12289-011-1053-810.1007/s12289-011-1053-8 ↗
2. 10.1016/S0007-8506(07)60021-310.1016/S0007-8506(07)60021-3 ↗
3. 10.1016/j.jmatprotec.2005.02.14810.1016/j.jmatprotec.2005.02.148 ↗
4. Oleksik V, Pascu A, Deac C, et al. The influence of geometrical parameters on the incremental forming process for knee implants analyzed by numerical simulation. In: NUMIFORM 2010, 2010, pp. 1208–1215.10.1063/1.3457520 ↗
5. 10.1016/j.jmatprotec.2007.05.05310.1016/j.jmatprotec.2007.05.053 ↗
6. Iseki H.; Kato K.; Sakamoto S., Flexible and incremental sheet metal forming using a spherical roller. In: Proceedings of 40th JJCTP , Japan, vol. 41, 1989, p. 44.
7. Al-Shayea A · Tehnički vjesnik · 2019 · 26 · 1606
8. 10.1016/j.ijmachtools.2006.06.01510.1016/j.ijmachtools.2006.06.015 ↗
9. 10.1016/j.ijmachtools.2007.07.00410.1016/j.ijmachtools.2007.07.004 ↗
10. 10.1016/j.matdes.2014.05.06610.1016/j.matdes.2014.05.066 ↗
11. 10.1007/s12289-010-0995-610.1007/s12289-010-0995-6 ↗
12. 10.1243/09544050332114885810.1243/095440503321148858 ↗
13. Dabwan A, Ragab A, Saleh M, et al. Determining the effect of key process parameters on forming force of single point incremental sheet metal forming. In: International conference on industrial engineering and operations management , Malaysia, 2016, pp. 2833–2840.
14. 10.1371/journal.pone.022134110.1371/journal.pone.0221341 ↗
15. 10.1016/j.jmatprotec.2004.04.13910.1016/j.jmatprotec.2004.04.139 ↗
16. 10.1155/2020/726594110.1155/2020/7265941 ↗
17. Yang M, Yao Z, Li Y, et al. Study on thickness thinning ratio of the forming parts in single point incremental forming process. Adv Mater Sci Eng 2018; 2018: Article ID 2927189.10.1155/2018/2927189 ↗
18. 10.1016/j.ijplas.2009.02.00210.1016/j.ijplas.2009.02.002 ↗
19. 10.4028/www.scientific.net/KEM.344.62110.4028/www.scientific.net/KEM.344.621 ↗
20. 10.1243/03093247JSA34010.1243/03093247JSA340 ↗
21. 10.1007/s11665-012-0400-310.1007/s11665-012-0400-3 ↗
22. 10.1007/s00170-011-3254-110.1007/s00170-011-3254-1 ↗
23. 10.1016/j.ijmecsci.2014.04.00110.1016/j.ijmecsci.2014.04.001 ↗
24. 10.1016/S0924-0136(02)00788-410.1016/S0924-0136(02)00788-4 ↗
25. 10.1016/j.jmatprotec.2014.12.00410.1016/j.jmatprotec.2014.12.004 ↗
26. 10.1016/j.ijmachtools.2014.04.00710.1016/j.ijmachtools.2014.04.007 ↗
27. 10.1016/j.proeng.2014.12.44210.1016/j.proeng.2014.12.442 ↗
28. 10.1016/j.jmrt.2015.01.00310.1016/j.jmrt.2015.01.003 ↗
29. 10.1007/s12206-010-1018-810.1007/s12206-010-1018-8 ↗
30. 10.1016/j.jmatprotec.2007.03.07910.1016/j.jmatprotec.2007.03.079 ↗
31. Hoaglin DC · Am Stat · 1978 · 32 · 1710.1080/00031305.1978.10479237 ↗
32. Martins P, Montanari L, Cristino V, et al. Formability and simulative tests in modern sheet metal forming education. In: Modern mechanical engineering . New York: Springer, 2014, pp. 411–447.10.1007/978-3-642-45176-8_14 ↗
33. FMTI_SYSTEMS(a), Grid Analyzer for Sheet Metal Industry. 2007.
34. FMTI_SYSTEMS(b), Technical Application Note 16. 2007.
35. 10.1016/j.optlastec.2009.03.00810.1016/j.optlastec.2009.03.008 ↗
36. 10.1016/j.knosys.2011.02.00710.1016/j.knosys.2011.02.007 ↗
37. Ertuğrul İ, Öztaş T, Özçil A, et al. Grey relational analysis approach in academic performance comparison of university: a case study of Turkish universities. Eur Scient J 2016; 12.
38. Shah A, Azmi A, Khalil A. Grey relational analyses for multi-objective optimization of turning S45C Carbon Steel. In: IOP conference series materials science and engineering , Malaysia, 2016.10.1088/1757-899X/114/1/012023 ↗
39. Prakash KS · Measurement · 2020 · 2020
40. 10.3390/e1201005310.3390/e12010053 ↗
41. 10.1016/j.proeng.2011.11.241010.1016/j.proeng.2011.11.2410 ↗
42. 10.1016/j.cirp.2008.03.04710.1016/j.cirp.2008.03.047 ↗
43. Julong D. · J Grey Syst · 1989 · 1 · 1