Finite element simulations and experimental verifications for forming limit curve determination of two-layer aluminum/brass sheets considering the incremental forming process
Source abstract
Abstract
In this paper, forming limit diagram (FLD) of aluminum/brass two-layer sheets through an incremental forming process (ISF) was studied numerically and experimentally. At first, the two-layer aluminum 1050/brass (65% copper) sheets were fabricated using the roll bonding process. Also, the finite element simulations of the incremental forming process with ABAQUS software were utilized to predict the FLD. For this purpose, the criterion of the second derivative of the equivalent plastic strain was used to predict fracture. Finally, the numerical simulation results were compared with the experimental results. For instance, comparing experimental and numerical FLD 0 values for the formed samples with forming angle 62.5-degree showed a 7% difference. However, the difference was negligible, and numerical simulation results could be used with an appropriate reliability coefficient. The effect of sheet arrangement towards tools was then investigated. It finds out from the experimental results that the formability of the Brass/Al (brass was up layer and aluminum was bottom layer) was more than the Al/Brass (aluminum is up layer and brass is bottom layer). In the following, the ISF parameters such as forming limit angle, step-down, and thickness distribution were investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
References (35)
Show source-provided references
1. 10.1016/j.jmatprotec.2005.02.16010.1016/j.jmatprotec.2005.02.160 ↗
2. Roux P. Machines for shaping sheet metal . US Pat 2,945,528, 1960.
3. Leszak E. Apparatus and process for incremental dieless forming . US Pat 3; 342; 051, 1967.
4. 10.1243/095440505X3221010.1243/095440505X32210 ↗
5. Mohammadi Najafabadi H · Modares Mech Eng · 2014 · 14 · 167
6. 10.1016/S0007-8506(07)60680-510.1016/S0007-8506(07)60680-5 ↗
7. Roohi H · Modares Mech Eng · 2019 · 19 · 259
8. 10.1016/S1003-6326(19)65179-410.1016/S1003-6326(19)65179-4 ↗
9. 10.1016/j.acme.2018.11.01110.1016/j.acme.2018.11.011 ↗
10. 10.1007/s00170-019-04470-y10.1007/s00170-019-04470-y ↗
11. 10.1007/s00170-009-2446-410.1007/s00170-009-2446-4 ↗
12. 10.1016/S0924-0136(01)00679-310.1016/S0924-0136(01)00679-3 ↗
13. Zahedi A · Modares Mech Eng · 2014 · 14 · 1
14. 10.1007/s12541-013-0283-810.1007/s12541-013-0283-8 ↗
15. 10.1016/j.ijmachtools.2006.06.01510.1016/j.ijmachtools.2006.06.015 ↗
16. 10.1007/s00170-009-2120-x10.1007/s00170-009-2120-x ↗
17. Hosseini SMR · Modares Mech Eng · 2018 · 18 · 174
18. 10.1016/j.proeng.2014.12.35310.1016/j.proeng.2014.12.353 ↗
19. 10.1115/MSEC2007-3112910.1115/MSEC2007-31129 ↗
20. Pohlak M · Proc Est Acad Sci · 2007 · 13 · 129
21. Tayebi P · Modares Mech Eng · 2018 · 18 · 45
22. 10.1016/j.cirpj.2019.02.00210.1016/j.cirpj.2019.02.002 ↗
23. 10.1016/j.ijmecsci.2016.08.00810.1016/j.ijmecsci.2016.08.008 ↗
24. 10.1007/s12633-020-00468-410.1007/s12633-020-00468-4 ↗
25. 10.1007/s42452-021-04378-x10.1007/s42452-021-04378-x ↗
26. 10.1016/S0924-0136(02)00788-410.1016/S0924-0136(02)00788-4 ↗
27. 10.1016/S0007-8506(07)61499-110.1016/S0007-8506(07)61499-1 ↗
28. Ashouri R · Int J Adv Des Manuf Technol · 2017 · 10 · 127
29. 10.2140/jomms.2018.13.3510.2140/jomms.2018.13.35 ↗
30. 10.1007/s11665-013-0625-910.1007/s11665-013-0625-9 ↗
31. 10.1007/s11665-012-0156-910.1007/s11665-012-0156-9 ↗
32. 10.1007/s00170-014-6610-010.1007/s00170-014-6610-0 ↗
33. 10.1007/s12666-016-0986-510.1007/s12666-016-0986-5 ↗
34. 10.1016/j.jmapro.2017.07.02210.1016/j.jmapro.2017.07.022 ↗
35. 10.1016/j.jmapro.2017.04.01610.1016/j.jmapro.2017.04.016 ↗