journal article·2022-03

Ballistic characterization of fiber elastomer metal laminate composites and effect of positioning of fiber reinforced elastomer

Vishwas Mahesh, Vinyas Mahesh, Dineshkumar Harursampath

Publisher page

Abstract

The present study aims at investigating the ballistic impact response of jute, natural rubber and aluminium based tri-layer composites with two different configurations, namely Aluminium-Jute-Rubber-Jute and Jute-Rubber-Jute-Aluminium. The proposed composites were fabricated using the compression moulding technique and subjected to ballistic impact testing at impact velocities of 75 m/s, 105 m/s, 154 m/s and 183 m/s. The energy absorption and damage mitigation characteristics of the proposed fibre metal elastomer tri-layer composites were assessed. Results showed that among the two proposed composites, the composite with rubber facing the impact side exhibits better energy absorption and also helps in damage mitigation compared to the composite having aluminium on the impact side. In addition, a parametric study was carried out by varying the thickness of the rubber layer. It was observed that the impact response of the proposed tri-layer composites improved with increasing thickness of the rubber layer, especially in the case of the Jute-Rubber-Jute-Aluminium configuration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Indian Institute of Science (IISc)

Siddaganga Institute of Technology

Department of Mechanical Engineering

National Institute of Technology

References (34)

Show source-provided references
1. 10.1016/j.ijimpeng.2012.11.00710.1016/j.ijimpeng.2012.11.007 ↗
2. 10.1016/j.tws.2017.11.00410.1016/j.tws.2017.11.004 ↗
3. 10.1016/j.tws.2017.02.02810.1016/j.tws.2017.02.028 ↗
4. 10.1016/j.tws.2017.04.01410.1016/j.tws.2017.04.014 ↗
5. 10.1016/j.ijimpeng.2016.06.00310.1016/j.ijimpeng.2016.06.003 ↗
6. 10.1016/j.matdes.2016.08.07210.1016/j.matdes.2016.08.072 ↗
7. 10.1016/j.tws.2017.03.03610.1016/j.tws.2017.03.036 ↗
8. 10.1016/j.ijimpeng.2012.08.00510.1016/j.ijimpeng.2012.08.005 ↗
9. 10.1016/j.tws.2020.10667310.1016/j.tws.2020.106673 ↗
10. 10.1016/j.compstruct.2020.11226410.1016/j.compstruct.2020.112264 ↗
11. 10.1063/1.508559610.1063/1.5085596 ↗
12. 10.1016/j.matpr.2017.08.01910.1016/j.matpr.2017.08.019 ↗
13. Mahesh V, Joladarashi S, Kulkarni SM. An experimental study on adhesion, flexibility, interlaminar shear strength, and damage mechanism of jute/rubber-based flexible “green” composite. J Thermoplast Compos Mater 2019: 1–28. DOI: 10.1177/0892705719882074.
14. 10.1088/2053-1591/ab016410.1088/2053-1591/ab0164 ↗
15. Mahesh V, Joladarashi S, Kulkarni S. Finite element simulation of low velocity impact loading on a sandwich composite. MATEC Web Conf 2018; 144: 1–10.
16. 10.4028/www.scientific.net/KEM.801.5910.4028/www.scientific.net/KEM.801.59 ↗
17. 10.1016/j.dt.2020.04.00210.1016/j.dt.2020.04.002 ↗
18. 10.1016/j.dt.2020.02.01310.1016/j.dt.2020.02.013 ↗
19. 10.1016/j.compstruct.2019.11119010.1016/j.compstruct.2019.111190 ↗
20. 10.1016/j.mechmat.2009.09.00810.1016/j.mechmat.2009.09.008 ↗
21. 10.1016/j.mechmat.2009.09.00910.1016/j.mechmat.2009.09.009 ↗
22. 10.1080/14786435.2012.72223510.1080/14786435.2012.722235 ↗
23. Mahesh V, Joladarashi S, Kulkarni S. Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading. Sci Iran Trans Mech Eng 2019; 26: 897–907.
24. Wang S. Analysis and inversion of contact stress for the finite thickness neo-hookean layer. J Appl Mech 2018; 85: 1–9.
25. 10.1016/j.soildyn.2017.09.01710.1016/j.soildyn.2017.09.017 ↗
26. 10.1007/s13726-018-0682-x10.1007/s13726-018-0682-x ↗
27. 10.1177/152808371142914410.1177/1528083711429144 ↗
28. 10.1016/j.matdes.2007.06.00710.1016/j.matdes.2007.06.007 ↗
29. 10.1002/pc.2439110.1002/pc.24391 ↗
30. 10.1016/j.compstruct.2015.11.06910.1016/j.compstruct.2015.11.069 ↗
31. Caliskan U, Ekici R, Bayazit AY, et al. Numerical model for composite patch repair of notched aluminum plates under impact loading. Proc Inst Mech Eng Part L J Mater Des Appl 2021; 235: 958–973.
32. Ghasemabadian MA, Kadkhodayan M, Altenhof W. Experimental, numerical, and multi-objective optimization investigations on the energy absorption features of single- and bi-layer deep-drawn cups. Proc Inst Mech Eng Part L J Mater Des Appl 2021; 235: 550–571.
33. 10.1177/1464420721101976710.1177/14644207211019767 ↗
34. 10.1016/j.tws.2021.10798610.1016/j.tws.2021.107986 ↗