journal article·2024-12

Developing a numerical modelling strategy for metallic pin pressing processes in fibre reinforced thermoplastics to investigate fibre rearrangement mechanisms during joining

B. Gröger, J. Gerritzen, A. Hornig, M. Gude

Publisher page

Abstract

A numerical modelling strategy for the direct pin pressing process of metallic pins into continuous fibre-reinforced thermoplastic organosheets is developed. The joining process is performed above the thermoplast’s melting temperature, altering the initial material structure of the composite by fibre rearrangement, which in turn influences the load-bearing capacity of the joint. Therefore, the modelling strategy aims at predicting the resultant material structure after pin pressing. The modelling approach considers both the textile architecture and the process parameters (temperature, tool velocity). A sub-meso modelling framework for the fibres based on a multi-filament approach is used. The interaction between fibres and the thermoplastic melt, as well as the matrix flow, is modelled using the Arbitrary Lagrangian Eulerian method. This allows for the prediction of matrix-rich zones and fibre rearrangement around the pin. The promising results show a good agreement of the resultant material structure in terms of compaction and fibre volume content around the pressed pin. Characteristic parameters show an underestimation of the laminate thickness below the pin. Moreover, an evaluation method for evaluating the orientation changes of the virtual multi-filaments is developed and presented to observe and assess fibre rearrangement and fibre volume content in detail during the numerical process simulation. It can be seen that only fibres around the pin are displaced and not in the whole molten area. Furthermore, it can be observed in detail that the initial position of the fibres in relation to the pin determines whether the fibres are displaced in the in-plane or out-of-plane direction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Lightweight Engineering and Polymer Technology (ILK), TUD Dresden University of Technology, Dresden, Germany

Center for Scalable Data Analytics and Artificial Intelligence Dresden/Leipzig (ScaDS.AI), TUD Dresden University of Technology, Dresden, Germany

Department of Engineering Science, University of Oxford, Oxford, UK

Funding

Deutsche Forschungsgemeinschaft

References (72)

Show source-provided references
1. Rana R · 2016
2. 10.1007/s42247-021-00186-610.1007/s42247-021-00186-6 ↗
3. 10.14669/AM.VOL.76.ART410.14669/AM.VOL.76.ART4 ↗
4. 10.1007/s11665-014-0962-310.1007/s11665-014-0962-3 ↗
5. 10.1177/08927057880010030510.1177/089270578800100305 ↗
6. 10.1016/j.jmatprotec.2013.12.02210.1016/j.jmatprotec.2013.12.022 ↗
7. 10.1016/j.jajp.2022.10011310.1016/j.jajp.2022.100113 ↗
8. 10.3390/polym1208168110.3390/polym12081681 ↗
9. 10.3390/ma1408189010.3390/ma14081890 ↗
10. 10.3390/ma1409228610.3390/ma14092286 ↗
11. 10.1016/j.jmapro.2018.01.01410.1016/j.jmapro.2018.01.014 ↗
12. 10.1016/j.jmatprotec.2016.10.01010.1016/j.jmatprotec.2016.10.010 ↗
13. 10.3390/ma1515545410.3390/ma15155454 ↗
14. 10.1063/1.511257010.1063/1.5112570 ↗
15. 10.3390/jcs610028710.3390/jcs6100287 ↗
16. 10.1201/b11837-8110.1201/b11837-81 ↗
17. Hufenbach W · Adv Mater Struct IV · 2012 · 188 · 176
18. 10.1002/mawe.20190003610.1002/mawe.201900036 ↗
19. Osswald T · 2006
20. Brown N · Adv Manuf: Polym Compos Sci · 2015 · 1 · 199
21. 10.21741/9781644902417-2210.21741/9781644902417-22 ↗
22. 10.1016/j.jajp.2021.10008410.1016/j.jajp.2021.100084 ↗
23. 10.1007/s00170-018-1960-710.1007/s00170-018-1960-7 ↗
24. 10.3390/jcs603006810.3390/jcs6030068 ↗
25. 10.1016/j.compositesa.2016.11.02710.1016/j.compositesa.2016.11.027 ↗
26. 10.1016/j.compositesa.2017.05.03210.1016/j.compositesa.2017.05.032 ↗
27. 10.1007/978-3-662-46341-310.1007/978-3-662-46341-3 ↗
28. 10.1016/j.compositesa.2021.10637910.1016/j.compositesa.2021.106379 ↗
29. 10.21741/9781644902479-2410.21741/9781644902479-24 ↗
30. 10.1098/rspa.1922.007810.1098/rspa.1922.0078 ↗
31. 10.1122/1.54994510.1122/1.549945 ↗
32. 10.1016/j.compositesa.2020.10580910.1016/j.compositesa.2020.105809 ↗
33. 10.1088/1757-899X/460/1/01200610.1088/1757-899X/460/1/012006 ↗
34. 10.1016/S0266-3538(00)00223-210.1016/S0266-3538(00)00223-2 ↗
35. 10.1016/j.compstruct.2015.09.01010.1016/j.compstruct.2015.09.010 ↗
36. 10.1016/j.jajp.2022.10010010.1016/j.jajp.2022.100100 ↗
37. 10.1063/1.46460710.1063/1.464607 ↗
38. 10.1063/1.46642310.1063/1.466423 ↗
39. 10.1016/j.euromechflu.2005.09.00410.1016/j.euromechflu.2005.09.004 ↗
40. 10.1063/1.47456110.1063/1.474561 ↗
41. 10.1002/0470091355.ecm00910.1002/0470091355.ecm009 ↗
42. 10.3390/polym1403053410.3390/polym14030534 ↗
43. 10.1063/1.277893710.1063/1.2778937 ↗
44. Hayashi S, Chen H, Hu W. Compression molding analysis of long fiber reinforced plastics using coupled method of beam and 3D adaptive EFG in LS-DYNA. 11th European LS-DYNA Conf 2017.
45. Hayashi S, Wu C, Hu W, et al. New methods for compression molding simulation and component strength validation for long carbon fiber reinforced thermoplastics. 12th European LS-DYNA Conference 2019.
46. LSTC. Keywords User’s Manual. Volume 1. 2019.
47. Chen H · FEA Info · 2016 · 5 · 79
48. 10.1016/j.compositesa.2007.08.01610.1016/j.compositesa.2007.08.016 ↗
49. 10.1016/j.matdes.2016.07.03510.1016/j.matdes.2016.07.035 ↗
50. 10.1016/j.compositesa.2016.03.02310.1016/j.compositesa.2016.03.023 ↗
51. 10.1016/j.compositesa.2017.09.01510.1016/j.compositesa.2017.09.015 ↗
52. 10.1016/j.compositesa.2020.10612810.1016/j.compositesa.2020.106128 ↗
53. 10.1007/s10443-021-09892-010.1007/s10443-021-09892-0 ↗
54. 10.3390/jcs404018810.3390/jcs4040188 ↗
55. 10.1016/j.compositesa.2009.11.00310.1016/j.compositesa.2009.11.003 ↗
56. 10.1016/j.matlet.2016.01.13710.1016/j.matlet.2016.01.137 ↗
57. 10.1007/s40194-020-00927-x10.1007/s40194-020-00927-x ↗
58. 10.1016/j.compstruct.2013.10.01510.1016/j.compstruct.2013.10.015 ↗
59. AG B. Polypropylene BJ100HP Polypropylene Copolymer. 2021, https://www.borealisgroup.com/storage/Datasheets/bj100hp/BJ100HP-PDS-REG_EUROPE-EN-V7-PDS-EUR-27865-10014097.pdf.
60. 10.3390/jmmp606014610.3390/jmmp6060146 ↗
61. DIN EN ISO 14129:1998-02. Fibre-reinforced plastic composites—Determination of the in-plane shear stress/strain response, including the in-plane shear modulus and strength by the ±45∘ .
62. Aquelet N. ALE adaptive mesh refinement in LS-Dyna. 12th International LS-DYNA Users Conference 2012.
63. 10.1016/j.compositesa.2010.05.00110.1016/j.compositesa.2010.05.001 ↗
64. 10.2478/v10304-012-0047-z10.2478/v10304-012-0047-z ↗
65. Specht E. www.packomania.com. 2023. Available from: www.packomania.com.
66. DIN EN ISO 2062:2010-04. Textilien – Garne von Aufmachungseinheiten – Bestimmung der Höchstzugkraft und Höchstzugkraftdehnung von Garnabschnitten unter Verwendung eines Prüfgeräts mit konstanter Verformungsgeschwindigkeit (CRE) (ISO 2062:2009) . 2009.
67. 10.1002/pol.1958.120281181210.1002/pol.1958.1202811812 ↗
68. 10.1016/0095-8522(65)90022-X10.1016/0095-8522(65)90022-X ↗
69. 10.1038/s41592-019-0686-210.1038/s41592-019-0686-2 ↗
70. 10.1016/j.ijfatigue.2017.12.01010.1016/j.ijfatigue.2017.12.010 ↗
71. Diez C, Ballal N and “rao014”. Open-lasso-python/lasso-python: Home of the open-source CAE Library Lasso-Python. GitHub Repository , https://github.com/open-lasso-python/lasso-python.
72. 10.1038/s41586-020-2649-210.1038/s41586-020-2649-2 ↗