journal article·2025-11

Simulation and experimental study of cold compression process for reducing the quenching residual stress of large 7050 aluminum alloy cambered forging

Wanfu Guo, Jindong Cui, Si Li

Publisher page

Abstract

The wing edge (large 7050 aluminum alloy cambered forging) is the major force-bearing component of the aircraft. Reducing the quenching residual stress on the wing edge is crucial after manufacturing. In this paper, a novel cold compression process is proposed to reduce the quenching residual stress by integral deformation along the arc length direction and subsection deformation along the width direction. The obtained results demonstrate that the residual tensile stress is concentrated in the center where the sternum and ribs intersect after quenching. Matching the quenching residual stress distribution, an adaptive cold compression (2% rib + 0.5% sternum) was implemented, the residual tensile stress along the arc length direction decreases almost 80%; especially the residual stress on the rib is effectively reduced. There is little difference between the simulation results and the practical measured results, and the simulation results have great reference value.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Wuhan University of Science and Technology

Jiujiang University

Funding

National Natural Science Foundation of China · the National Natural Science Foundation of Hubei province

References (26)

Show source-provided references
1. 10.1088/2053-1591/ac565d10.1088/2053-1591/ac565d ↗
2. 10.1016/j.msea.2021.14216710.1016/j.msea.2021.142167 ↗
3. 10.1155/2017/678627010.1155/2017/6786270 ↗
4. 10.1016/j.msea.2016.08.01710.1016/j.msea.2016.08.017 ↗
5. 10.1016/j.msea.2015.07.01810.1016/j.msea.2015.07.018 ↗
6. Puchkov YA, Dung MX, Plokhikh AI, et al. Effect of cryogenic treatment and thermal shock on residual stresses. Stru Prop Alloy D16 2023; 64: 720–728.
7. 10.1016/j.msea.2023.14544710.1016/j.msea.2023.145447 ↗
8. 10.1515/rams-2022-002810.1515/rams-2022-0028 ↗
9. 10.1016/j.jmapro.2023.02.04910.1016/j.jmapro.2023.02.049 ↗
10. 10.1515/rams-2022-001910.1515/rams-2022-0019 ↗
11. 10.1080/10910344.2023.221530910.1080/10910344.2023.2215309 ↗
12. 10.1007/s11665-023-08816-210.1007/s11665-023-08816-2 ↗
13. Robinson JS, Donovan AO’, Wimpory RC. Uphill quenching to reduce residual stress in aluminium alloy 7449 hollow structures. Adv Residual Stress Technol 2022; 62: 1411–1420.
14. 10.3390/ma1617591010.3390/ma16175910 ↗
15. 10.3390/met1304073210.3390/met13040732 ↗
16. Gong H, Tang H, Zhang T, et al. Evolution of stress and strain in 2219 aluminum alloy ring during roll-bending process. Chin J Aeronaut 2022; 35: 259–271.
17. 10.1088/2053-1591/ac565d10.1088/2053-1591/ac565d ↗
18. Li ZX, Shu X. Residual stress analysis of multi-pass cold spinning process. Chin J Aeronaut 2022; 35: 13.
19. 10.1007/s42243-021-00563-910.1007/s42243-021-00563-9 ↗
20. 10.1016/S0924-0136(03)00569-710.1016/S0924-0136(03)00569-7 ↗
21. 10.1177/095441001143395210.1177/0954410011433952 ↗
22. Li D, Deng L, Wang XY. Numerical simulation of residual stress during stamping-forging forming of 2024 aluminum alloy sheet metal. Adv Mat Res 2012; 602–604: 1903–1909.
23. Liu LL, Fan LX, Xu C. Simulation study on residual stress in cold radial forged barrel. Binggong Xuebao/Acta Armamentarii 2012; 33: 1291–1297.
24. Dai W, Yi YP, Cui JD. Reduction of quenching residual stress for 7A85 aluminum alloy forging by cold compression. J Central South Univ (Sci Technol) 2015; 46: 1609–1614.
25. 10.1016/j.ijmachtools.2022.10397910.1016/j.ijmachtools.2022.103979 ↗
26. 10.1016/j.jmatprotec.2022.11754310.1016/j.jmatprotec.2022.117543 ↗