journal article·2021-05Open access

Clustering, nano-scale precipitation and strengthening of steels

Zhiping Xiong, Ilana Timokhina, Elena Pereloma

Abstract

Continuous innovations in design of advanced structural steels are essential for future progress in manufacturing, automotive and construction industries. Events taking place at nano and atomic scales play crucial role in controlling the strength of steels. Recently, strengths of 1–1.5 GPa were realised in nano-scale precipitation strengthened steels. With availability of modern characterisation techniques, such as high-resolution scanning transmission electron microscopy and atom probe tomography, it is now possible to gain insight into the mechanisms of solute atoms clustering and formation of nano-precipitates, as well as their interactions with dislocations and resulting contribution to strength. In this review, the focus is on cluster formation and nano-precipitation in low temperature body centred cubic phases (ferrite, bainitic ferrite and martensite) in a range of steels from high strength low alloyed to maraging ones. Experimental and modelling data on nucleation and growth of these features is presented. The possible strengthening mechanisms are reviewed. Finally, future research areas and challenges for these classes of steels are critically discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Bhadeshia · 2017
2. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
3. The size of a dislocation10.1088/0959-5309/52/1/305 ↗
4. The mechanical properties of matter
5. Physics of strength and plasticity10.1063/1.3022886 ↗
7. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
8. Precipitation hardening10.1007/BF02670416 ↗
9. Precipitation hardening in metals10.1179/026708399773002782 ↗
10. Progress report on recent advances in physical metallurgy: (C) The quantitative relationship between microstructure and properties in two-phase alloys10.1179/imr.1973.18.1.31 ↗
11. Metallurgical features of Nanohiten™ and application to warm stamping
12. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
13. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates10.1016/j.actamat.2010.03.005 ↗
14. Age hardening and mechanical properties of a 2400 MPa grade cobalt-free maraging steel10.1007/s11661-006-1089-4 ↗
15. Microstructure and mechanical properties of a 2000 MPa grade co-free maraging steel10.1007/s11661-005-0100-9 ↗
16. Sub-ångstrom resolution using aberration corrected electron optics10.1038/nature00972 ↗
17. Aberration-corrected scanning transmission electron microscopy: from atomic imaging and analysis to solving energy problems10.1098/rsta.2009.0112 ↗
18. Miller · 2000
19. Atom probe tomography10.1063/1.2709758 ↗
20. The future of atom probe tomography10.1016/S1369-7021(12)70069-X ↗
21. Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardening10.1016/j.actamat.2004.08.018 ↗
22. Effect of aging and deformation on the microstructure and properties of Fe-Ni-Ti maraging steel
23. Characterization of clusters and ultrafine precipitates in Nb-containing C-Mn–Si steels10.1016/j.scriptamat.2005.10.008 ↗
24. Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel10.1016/j.scriptamat.2013.11.026 ↗
25. Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography10.1016/j.scriptamat.2006.12.018 ↗
26. Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium–molybdenum steels10.1016/j.actamat.2013.01.028 ↗
27. Transformation from cluster to nano-precipitate in microalloyed ferritic steel10.1016/j.scriptamat.2018.09.039 ↗
28. Petch relation and grain boundary sources
29. Homogeneous second-phase precipitation
30. Porter · 1992
31. The effect of randomness on the strength of high-entropy alloys10.1016/j.actamat.2018.12.032 ↗
32. Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe–Mn maraging steels10.1016/j.actamat.2014.05.016 ↗
33. A new concept in further alloying of Fe–Ni–Mn maraging steels10.1016/j.scriptamat.2008.11.046 ↗
34. Aging characteristics and mechanical properties of 1600MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel10.1016/j.actamat.2014.03.051 ↗
35. Synergistic effects of Cu and Ni on nanoscale precipitation and mechanical properties of high-strength steels10.1016/j.actamat.2013.06.040 ↗
36. Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era10.1016/j.mattod.2016.07.002 ↗
37. Components of the flow stress of iron10.1016/0001-6160(67)90371-9 ↗
38. Theory assisted design of high strength low alloy aluminum10.1016/0956-7151(93)90334-O ↗
39. The effect of prestressing on the strength of neutron-irradiated copper single crystals10.1063/1.1753962 ↗
40. Dislocation movement through random arrays of obstacles10.1139/p67-044 ↗
41. Dislocations in a simple cubic lattice10.1088/0959-5309/59/2/309 ↗
42. Experimental evaluation of the Peierls stresses in a variety of crystals and their relation to the crystal structure10.1016/j.actamat.2012.09.059 ↗
43. Peierls stresses estimated by a discretized Peierls-Nabarro model for a variety of crystals10.1016/j.mtla.2019.100218 ↗
44. Generalization of the existing relations between microstructure and yield stress from ferrite–pearlite to high strength steels10.1016/j.msea.2012.10.012 ↗
45. A model for the microstructure behaviour and strength evolution in lath martensite10.1016/j.actamat.2015.07.018 ↗
46. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides10.2355/isijinternational.44.1945 ↗
47. Yield strength and transformation substructure of quenched iron-nickel alloys
48. The plasticity of pure single crystals10.1080/00018736400101031 ↗
49. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
50. Physical metallurgy of microalloyed medium carbon engineering steels
51. Frictional forces on dislocation arrays at the lower yield point in iron10.1016/0001-6160(55)90090-0 ↗
52. A mathematical model to predict the mechanical properties of hot rolled C-Mn and microalloyed steels10.2355/isijinternational.32.1329 ↗
53. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
54. Three-dimensional atomic-scale mapping of a cottrell atmosphere around a dislocation in iron10.1016/S1359-6462(00)00361-4 ↗
55. Atomic scale investigation of boron nanosegregation in Fe Al intermetallics10.1016/S1359-6462(99)00106-2 ↗
56. Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions10.1016/j.actamat.2006.05.040 ↗
57. Characterization of the carbon and retained austenite distributions in martensitic medium carbon, high silicon steel10.1007/s11661-007-9160-3 ↗
58. Tempering of low-carbon martensite
59. An atom probe study of the aging of iron-nickel-carbon martensite
60. On the yield strength of quenched low-carbon lath martensite
61. Work-hardening of ferrite and microstructure-based modelling of its mechanical behaviour under tension10.1016/j.actamat.2008.05.023 ↗
62. Brown · 1971
63. Quantification of precipitation hardening and evolution of precipitates10.2320/matertrans.43.1273 ↗
64. Work hardening of dispersion-hardened crystals10.1080/14786436608224282 ↗
65. Orowan · 1948 · 451
66. Ashby · 1958
67. Results and consequences of a recalculation of the frank-read and the orowan stress10.1016/0001-6160(66)90074-5 ↗
68. The effect of dislocation self-interaction on the orowan stress10.1080/14786437308227997 ↗
69. Origin of double-peak precipitation hardening in metallic alloys10.1016/j.ijplas.2018.07.016 ↗
70. A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system10.1016/0001-6160(72)90091-0 ↗
71. Beobachtung der wechselwirkung von versetzungen mit kohärenten geordneten zonen (II)10.1002/pssb.19650120123 ↗
72. Predicting microstructure and strength of maraging steels: Elemental optimisation10.1016/j.actamat.2016.07.020 ↗
73. Consideration of particle-strengthening mechanism of copper-precipitation-strengthened steels by atom probe tomography analysis10.1016/j.msea.2011.12.056 ↗
74. The cleavage strength of polycrystals
75. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
76. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
77. Plastizitatseigenschaften grob-zweiphasiger werkstoffe
78. Tensile properties and inhomogeneous deformation of ferrite-martensite dual-phase steels10.1007/BF00354695 ↗
79. The mechanical properties of zero- carbon ferrite-plus-martensite structures10.1007/BF02646397 ↗
80. Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steels10.1016/j.msea.2007.02.042 ↗
81. On strength of microalloyed steels: an interpretive review10.1179/174328409X455233 ↗
82. Gladman · 1997
83. Edmonds DV, Honeycombe RWK. Precipitation in iron-based alloys. In: Russell KC, Aaronson HI, editors. Precipitation processes in solids: Metallurgical Society of AIME; 1978. p. 121-60.
84. Processes, microstructure and properties of vanadium microalloyed steels10.1179/174328409X453253 ↗
85. Microalloyed steels10.1179/1743281215Y.0000000063 ↗
86. Titanium microalloyed steels10.1080/03019233.2018.1446496 ↗
87. Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel10.1007/s11661-001-0142-6 ↗
88. Interphase precipitation in vanadium-alloyed steels: strengthening contribution and morphological variability with austenite to ferrite transformation10.1016/j.actamat.2013.11.025 ↗
89. Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti–Nb and Ti–Nb–Mo microalloyed steels10.1016/j.msea.2014.09.111 ↗
90. Mechanical properties and characteristics of nanometer-sized precipitates in hot-rolled low-carbon ferritic steel10.1007/s12613-014-0904-y ↗
91. Mukherjee · 2012
92. Dhara · 2018
93. Bikmukhametov · 2019
94. Tensile behavior of Ti, Mo-added low carbon steels with interphase precipitation10.2355/isijinternational.54.212 ↗
95. The determining role of finish cooling temperature on the microstructural evolution and precipitation behavior in an Nb-V-Ti microalloyed steel in the context of newly developed ultrafast cooling10.1007/s11661-016-3424-8 ↗
96. Dispersion hardening by niobium carbonitride precipitation in ferrite10.1179/mst.1997.13.9.731 ↗
97. Microstructural evolution in a new 770MPa hot rolled Nb–Ti microalloyed steel10.1016/j.msea.2004.11.041 ↗
98. Niobium in modern steels10.1179/095066003225008833 ↗
99. Strengthening mechanisms in thermomechanically processed NbTi-microalloyed steel10.1007/s11661-015-2969-2 ↗
100. Keimbildung in übersättigten gebilden10.1515/zpch-1926-11927 ↗