journal article·2021-05Open access

Thin coatings for fire protection: An overview of the existing strategies, with an emphasis on layer-by-layer surface treatments and promising new solutions

Anne-Lise Davesne, Maude Jimenez, Fabienne Samyn, Serge Bourbigot

Abstract

Catastrophes due to fires cause a lot of material damages and the loss of many human lives. They have been rising in number and severity over the years because of the extensive use of flammable materials such as polymers, which is why it is necessary to design strategies to limit their flammability. Most commercial solutions rely on adding molecules called fire retardant in the bulk of the polymers. On the other hand, concerns regarding the health and environmental hazards of this type of treatments have been growing among both the scientific community and the general public, and regulations were strengthened in response. In this context, fire retardant surface treatments have attracted a lot of the attention recently as they allow to concentrate the fire retardant effect at the interface between the material and the flame, that is, where the combustion process appears. Coatings with thicknesses ranging from the dozens of nanometers to a few micrometers are favored as they limit the amount of material used and limit the impact on the functional properties of the material. This review aims at giving an overview of the different strategies for developing thin coatings for fire protection, with a special emphasis on layer-by-layer surface treatments, which is one of the most promising solutions being developed. One pot strategies as well as several opportunities for new designs are also proposed in order to give some perspectives and new ideas on the development of novel systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Flame retardant materials and properties · Surface Modification and Superhydrophobicity · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. 2019
2. Brushlinsky · 2019
3. Thermal degradation and fire behavior of high performance polymers10.1080/15583724.2018.1546736 ↗
4. Fire retardant polymers: recent developments and opportunities10.1039/b702511d ↗
5. An inherently flame-retardant polyamide containing a phosphorus pendent group prepared by interfacial polymerization10.1039/C6RA17108G ↗
6. Flame retardant polystyrene copolymers: preparation, thermal properties, and fire toxicities10.1002/pat.3261 ↗
7. Morgan · 2015
8. The future of flame retardant polymers–Unmet needs and likely new approaches10.1080/15583724.2018.1454948 ↗
9. Intumescence and nanocomposites: a novel route for flame-retarding polymeric materials
10. Recent developments in flame retardant polymeric coatings10.1016/j.porgcoat.2013.07.014 ↗
11. Flame-retardant surface treatments10.1038/s41578-019-0164-6 ↗
12. History and principles of the sol-gel process, and some new multicomponent oxide coatings10.1016/0022-3093(82)90242-3 ↗
13. Chemistry and fundamentals of the sol-gel process
14. Basic principles of sol-gel chemistry
15. Synthesis and characterization of flame retarding UV-curable organic–inorganic hybrid coatings10.1002/app.24274 ↗
16. Synthesis and characterization of UV-curable phosphorus containing hybrid materials prepared by sol-gel technique10.1002/pat.1546 ↗
17. Synthesis and characterization of novel polyimide/SiO2 nanocomposite materials containing phenylphosphine oxide via sol-gel technique10.1002/app.31404 ↗
18. Preparation and characterization of UV-curable, boron-containing, transparent hybrid coatings10.1002/app.33358 ↗
19. Preparation of photo curable highly hydrophobic coatings using a modified castor oil derivative as a sol-gel component10.1016/j.porgcoat.2011.05.012 ↗
20. UV cured thiol-ene flame retardant hybrid coatings10.1016/j.porgcoat.2012.10.012 ↗
21. Flame resistance, physical and mechanical properties of UV-cured hybrid coatings containing low-hydroxyl-content sols via an anhydrous sol-gel process10.1016/j.porgcoat.2017.01.015 ↗
22. Flame retarding poly(methyl methacrylate) with nanostructured organic-inorganic hybrids coatings10.1016/S0032-3861(03)00396-3 ↗
23. Novel fluorinated inorganic-organic finishing materials for nylon carpeting10.1177/004051750407401209 ↗
24. Fire retardant sol–gel coatings for flexible polyurethane foams10.1039/C6RA02094A ↗
25. Highly flame retardant expanded polystyrene foams from phosphorus-nitrogen-Silicon synergistic adhesives10.1021/acs.iecr.6b05065 ↗
26. Flame retardant UV-curable acrylated epoxidized soybean oil based organic-inorganic hybrid coating10.1016/j.porgcoat.2012.10.007 ↗
27. Hybrid organic-inorganic materials as coatings for protecting wood10.1016/j.porgcoat.2013.11.010 ↗
28. Cotton fabrics treated with novel oxidic phases acting as effective smoke suppressants10.1016/j.carbpol.2012.05.032 ↗
29. Sol-gel treatments for enhancing flame retardancy and thermal stability of cotton fabrics: optimisation of the process and evaluation of the durability10.1007/s10570-010-9470-2 ↗
30. Sol-gel treatments on cotton fabrics for improving thermal and flame stability: effect of the structure of the alkoxysilane precursor10.1016/j.carbpol.2011.08.036 ↗
31. Cotton fabrics treated with hybrid organic-inorganic coatings obtained through dual-cure processes10.1007/s10570-011-9564-5 ↗
32. A novel sol-gel multi-layer approach for cotton fabric finishing by tetraethoxysilane precursor10.1016/j.surfcoat.2013.07.033 ↗
33. Effect of hybrid phosphorus-doped silica thin films produced by sol-gel method on the thermal behavior of cotton fabrics10.1016/j.polymdegradstab.2011.01.013 ↗
34. Synergistic effects in the pyrolysis of phosphorus-based flame-retardants: the role of Si- and N-based compounds10.1016/j.polymdegradstab.2016.06.009 ↗
35. Enhancement of thermal stability, flame retardancy, and antimicrobial properties of cotton fabrics functionalized by inorganic nanocomposites10.1021/ie502584m ↗
36. Flame retardants based on amino silanes and phenylphosphonic acid10.1016/j.polymdegradstab.2016.04.012 ↗
37. Thermal stability, flame retardancy and mechanical properties of cotton fabrics treated with inorganic coatings synthesized through sol-gel processes10.1016/j.carbpol.2011.10.032 ↗
38. Thermal stability and flame retardancy of polyester, cotton, and relative blend textile fabrics subjected to sol-gel treatments10.1002/app.32954 ↗
39. Construction of flame retardant coating on polyamide 6.6 via UV grafting of phosphorylated chitosan and sol–gel process of organo-silane10.1016/j.carbpol.2017.11.069 ↗
40. Thermal stability and flame retardancy of polyester fabrics sol-gel treated in the presence of boehmite nanoparticles10.1016/j.polymdegradstab.2013.06.021 ↗
41. Few layer deposition and sol-gel finishing of organic-inorganic compounds for improved flame retardant and hydrophilic properties of polyamide 66 textiles: a hybrid approach10.1016/j.porgcoat.2019.01.010 ↗
42. Hybrid phosphorus-doped silica architectures derived from a multistep sol-gel process for improving thermal stability and flame retardancy of cotton fabrics10.1016/j.polymdegradstab.2012.05.030 ↗
43. The role of pre-hydrolysis on multi step sol-gel processes for enhancing the flame retardancy of cotton10.1007/s10570-012-9806-1 ↗
44. Sol-gel derived architectures for enhancing cotton flame retardancy: effect of pure and phosphorus-doped silica phases10.1016/j.polymdegradstab.2013.11.020 ↗
45. Phosphorus- and nitrogen-doped silica coatings for enhancing the flame retardancy of cotton: synergisms or additive effects?10.1016/j.polymdegradstab.2012.11.017 ↗
46. Novel flame retardant finishing systems for cotton fabrics based on phosphorus-containing compounds and silica derived from sol-gel processes10.1016/j.carbpol.2011.03.024 ↗
47. Sol-gel treatments to flame retard PA11/flax composites10.3390/fib7100086 ↗
48. An eco-friendly and effective flame retardant coating for cotton fabric based on phytic acid doped silica sol approach10.1016/j.porgcoat.2020.105539 ↗
49. Flame retardant polyacrylonitrile fabrics prepared by organic-inorganic hybrid silica coating via sol-gel technique10.1016/j.porgcoat.2017.07.022 ↗
50. Hybrid silica-phytic acid coatings: effect on the thermal stability and flame retardancy of cotton10.3390/polym11101664 ↗
51. Flame retardant and hydrophobic coatings on cotton fabrics via sol-gel and self-assembly techniques10.1016/j.jcis.2017.06.087 ↗
52. One-pot fabrication of superhydrophobic and flame-retardant coatings on cotton fabrics via sol-gel reaction10.1016/j.jcis.2018.08.060 ↗
53. Hydrophobic and flame-retardant finishing of cotton fabrics for water–oil separation10.1007/s10570-020-03057-1 ↗
54. Effect of phosphorus-containing inorganic-organic hybrid coating on the flammability of cotton fabrics: synthesis, characterization and flammability10.1016/j.cej.2016.02.080 ↗
55. Pyrolysis properties and flame retardant effects of fabrics finished by hybrid silica-based sols10.1016/j.proeng.2017.12.114 ↗
56. Functionalization of cellulose fibres with DOPO-polysilsesquioxane flame retardant nanocoating10.1007/s10570-015-0599-x ↗
57. Study of flame-retardant finishing of cellulose fibres: organic-inorganic hybrid versus conventional organophosphonate10.1016/j.polymdegradstab.2013.09.020 ↗
58. Thermal behaviour and flame retardancy of monoethanolamine-doped sol-gel coatings of cotton fabric10.1016/j.porgcoat.2016.10.035 ↗
59. Facile synthesis of novel reactive phosphoramidate siloxane and application to flame retardant cellulose fabrics10.1007/s10570-019-02465-2 ↗
60. Thermal stability, flame retardancy and abrasion resistance of cotton and cotton-linen blends treated by sol-gel silica coatings containing alumina micro- or nano-particles10.1016/j.polymdegradstab.2013.05.002 ↗
61. Synthesis and characterization of nano-sized zinc oxide coating on cellulosic fibers: photoactivity and flame-retardancy study10.1002/cjoc.201190230 ↗
62. Durable flame retardant finish for silk fabric using boron hybrid silica sol10.1016/j.apsusc.2016.06.119 ↗
63. Flame retardance and thermal stability of wool fabric treated by boron containing silica sols10.1016/j.matdes.2015.07.163 ↗
64. Synergistic inhibitory action of P- and Si-containing precursors in sol-gel coatings on the thermal degradation of polyamide 610.1016/j.polymdegradstab.2016.03.026 ↗
65. Optimization of mechanical, thermal, and ignition properties of polyester fabric using urea and phosphoric acid10.1177/1528083718798636 ↗
66. Elaboration of fire retardant coatings on polyamide-6 using a cold plasma polymerization process10.1016/S0257-8972(01)01646-2 ↗
67. Thermal stability and flammability studies of coated polymer powders using a plasma fluidized bed process10.1023/A:1014576730732 ↗
68. New approach to flame retardancy using plasma assisted surface polymerisation techniques10.1016/S0141-3910(99)00059-2 ↗
69. Jama · 2001 · 200
70. Characterization of a plasma polymer coating from an organophosphorus silane deposited at atmospheric pressure for fire-retardant purposes10.1016/j.porgcoat.2015.06.005 ↗
71. Surface controlled fire retardancy of polymers using plasma polymerisation10.1002/1439-2054(20020901)287:9<579::AID-MAME579>3.0.CO;2-6 ↗
72. Efficient flame retardant thin films synthesized by atmospheric pressure PECVD through the high Co-deposition rate of Hexamethyldisiloxane and triethylphosphate on polycarbonate and Polyamide-6 substrates10.1021/acsami.6b01819 ↗
73. Flame-retardant composite coatings for cotton fabrics fabricated by using oxygen plasma-induced polymerization of vinyl phosphonic acid/cyclotetrasiloxane10.1177/0040517519848158 ↗
74. Surface modification of fabrics for improved flash-fire resistance using atmospheric pressure plasma in the presence of a functionalized clay and polysiloxane10.1002/pat.1707 ↗
75. Characterization of organosilicon films synthesized by N2-PACVD. Application to fire retardant properties of coated polymers10.1016/j.surfcoat.2003.10.067 ↗
76. Plasma-induced graft-polymerization of flame retardant monomers onto PAN fabrics10.1016/j.surfcoat.2004.11.030 ↗
77. Towards multifunctional surfaces using the plasma-induced graft-polymerization (PIGP) process: flame and waterproof cotton textiles10.1016/j.surfcoat.2006.10.027 ↗
78. Graft copolymerization coating of methacryloyloxyethyl diphenyl phosphate flame retardant onto silk surface10.1016/j.porgcoat.2014.01.023 ↗
79. Multifunctional silk fabrics by means of the plasma induced graft polymerization (PIGP) process10.1016/j.surfcoat.2011.01.006 ↗
80. Plasma-induced graft-polymerisation of ethylene glycol methacrylate phosphate on polyethylene films10.1016/j.polymdegradstab.2008.03.009 ↗
81. Characterisation of flame retardant plasma polymer deposited BOPP film10.1179/174328908X309385 ↗
82. Elaboration of a fire retardant coating for polyamide-6 using cold plasma polymerization of a fluorinated acrylate10.1016/j.surfcoat.2003.10.074 ↗
83. Influence of surface activation by plasma and nanoparticle adsorption on the morphology, thermal stability and combustion behavior of PET fabrics10.1016/j.eurpolymj.2011.01.009 ↗
84. Thermo-physical performance of organoclay coatings deposited on the surfaces of glass fibre-reinforced epoxy composites using an atmospheric pressure plasma or a resin binder10.1016/j.clay.2014.06.013 ↗
85. Application of low-frequency oxygen plasma treatment to polyester fabric to reduce the amount of flame retardant agent10.1177/0040517511420758 ↗
86. Deposition of thick polymer or inorganic layers with flame-retardant properties by combination of plasma and spray processes10.1016/j.surfcoat.2013.04.039 ↗
87. Environmentally friendly flame-retardant materials produced by atmospheric pressure plasma modifications10.1002/app.35087 ↗
88. Atmospheric pressure plasma enhanced synthesis of flame retardant cellulosic materials10.1002/app.31987 ↗
89. Buildup of ultrathin multilayer films by a self-assembly process: III. Consecutively alternating adsorption of anionic and cationic polyelectrolytes on charged surfaces10.1016/0040-6090(92)90417-A ↗
90. Decher · 2012 · vol. 1 · 1
91. Multilayers of colloidal particles10.1016/0095-8522(66)90018-3 ↗
92. Towards complex matter: supramolecular chemistry and self-organization10.1017/S1062798709000805 ↗
93. Molecular self-assembly and nanochemistry: a chemical strategy for the synthesis of nanostructures10.1126/science.1962191 ↗
94. Bottom-up design of biomimetic assemblies10.1016/j.addr.2003.10.047 ↗
95. Mérindol · 2014
96. Comparison of the structure of polyelectrolyte multilayer films exhibiting a linear and an exponential growth regime: an in situ atomic force microscopy study10.1021/ma0119833 ↗
97. Exponential growth of LBL films with incorporated inorganic sheets10.1021/nl8011648 ↗
98. Photoresponsive layer-by-layer ultrathin films prepared from a hyperbranched azobenzene-containing polymeric diazonium salt10.1016/j.tsf.2008.10.136 ↗
99. Layer-by-layer growth of electrostatically assembled multilayer porphyrin films10.1021/la960024c ↗
100. Controlled release of encapsulated methylene blue in a multilayered textile coating10.1051/matecconf/20130704012 ↗