journal article·2014-05

Properties and paper sizing application of waterborne polyurethane emulsions synthesized with isophorone diisocyanate

Yu-hua Guo, Jian-jun Guo, Hui Miao, Li-jun Teng, Zhen Huang

Progress in Organic Coatings· Volume 77· Issue 5
Publisher page

Abstract

Abstract In this work, a two-step synthesis methodology has been used to synthesize a series of waterborne polyurethane (WPU) emulsions with isophorone diisocyanate (IPDI), poly-caprolactone diol (PCL) and dimethylol propionic acid (DMPA) as monomers and ethylenediamine (EDA) as the chain extender, respectively. The influences of the NCO/OH molar ratio, DMPA content, chemicals-adding sequence, and acetone content on the physical properties of the resultant emulsions have been investigated in detail. The results show that the emulsion viscosity increases with an increase in the NCO/OH molar ratio or DMPA content whereas it declines sharply as the acetone amount increases. The emulsion particle size is seen to increase with the NCO/OH molar ratio but it decreases as the DMPA content increases. The chemicals-adding sequence is observed to strongly affect the particle size and viscosity of the resultant emulsions. For cast films, with an increase in the NCO/OH molar ratio, the elongation monotonically decreases while the tensile strength is seen to increase at first and then deceases. The film water absorption capacity is found to go up as the DMPA content increases. Furthermore, after sized with the emulsions, the paper water resistance is markedly improved and the 30s Cobb value is seen to decrease by 63% as compared to the unsized counterpart. The paper folding resistance and the tensile index are also improved to certain extents. For producing well-performed WPU emulsions for sizing paper sheets, an NCO/OH molar ratio of 1.6–1.8 and a DMPA content of 6.0–7.0 wt.% are preferably chosen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Advanced Polymer Synthesis and Characterization · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Davison · Tappi Journal · 1975 · 58 · 48
2. Bourbonnais · Biomacromolecules · 2010 · 11 · 98910.1021/bm9014667 ↗
3. Ashori · Bioresource Technology · 2008 · 99 · 40410.1016/j.biortech.2006.12.011 ↗
4. Liu · Appita Journal · 2008 · 61 · 387
5. Hodgson · Appita Journal · 1994 · 47 · 402
6. Agatha · Canadian Journal of Chemical Engineering · 2007 · 85 · 58010.1002/cjce.5450850503 ↗
7. Mourao · Journal of Adhesion Science and Technology · 2011 · 25 · 74310.1163/016942410X525984 ↗
8. Costa · Appita Journal · 2010 · 63 · 392
9. Kitaoka · Nordic Pulp & Paper Research Journal · 2001 · 16 · 9610.3183/NPPRJ-2001-16-02-p096-102 ↗
10. Gess · Tappi Journal · 2005 · 4 · 25
11. Samyn · Progress in Organic Coatings · 2010 · 69 · 44210.1016/j.porgcoat.2010.08.008 ↗
12. Fernandes · Industrial & Engineering Chemistry Research · 2010 · 49 · 643210.1021/ie100573z ↗
13. Okamoto · Progress in Organic Coatings · 1996 · 29 · 17510.1016/S0300-9440(96)00660-1 ↗
14. Yao · Journal of Applied Polymer Science · 2012 · 124 · E21610.1002/app.36377 ↗
15. Synthesis and characterization of waterborne polyurethane adhesives containing different amount of ionic groups (I)10.1002/app.25052 ↗
16. Athawale · Journal of Applied Polymer Science · 2010 · 117 · 57210.1002/app.31267 ↗
17. Saetung · Journal of Applied Polymer Science · 2012 · 124 · 274210.1002/app.35318 ↗
18. Du · Journal of Applied Polymer Science · 2008 · 110 · 139610.1002/app.28805 ↗
19. Rahman · Journal of Applied Polymer Science · 2012 · 125 · 8810.1002/app.34816 ↗
20. Li · Journal of Applied Polymer Science · 2013 · 127 · 184810.1002/app.37915 ↗
21. García-Pacios · International Journal of Adhesion & Adhesives · 2010 · 30 · 45610.1016/j.ijadhadh.2010.03.006 ↗
22. Otts · Polymer · 2005 · 46 · 269910.1016/j.polymer.2005.01.053 ↗
23. Park · Polymer · 2006 · 66 · 585
24. Guo · Colloids and Surfaces A: Physicochemical and Engineering Aspects · 2013 · 427 · 5310.1016/j.colsurfa.2013.03.017 ↗
25. Mequanint · European Polymer Journal · 2006 · 42 · 114510.1016/j.eurpolymj.2005.11.008 ↗
26. Athawale · Progress in Organic Coatings · 2009 · 65 · 39210.1016/j.porgcoat.2009.03.004 ↗
27. Guo · Progress in Organic Coatings · 2012 · 74 · 24810.1016/j.porgcoat.2011.12.016 ↗
28. Lee · Colloids and Surfaces A: Physicochemical and Engineering Aspects · 2006 · 276 · 17610.1016/j.colsurfa.2005.10.034 ↗
29. Orgilés-Calpena · International Journal of Adhesion & Adhesives · 2009 · 29 · 30910.1016/j.ijadhadh.2008.06.004 ↗
30. Cakić · Progress in Organic Coatings · 2010 · 67 · 27410.1016/j.porgcoat.2009.11.003 ↗
31. Chen · Chinese Journal of Colloid Polymer · 2010 · 28 · 62
32. Hao · Ion Exchange Adsorption · 1999 · 15 · 97