journal article·2019-08

Synthesis and application of mesoporous carbon nanospheres containing walnut extract for fabrication of active protective epoxy coatings

Seyyed Arash Haddadi, Taha Behroozi Kohlan, Sina Momeni, Ahmad Ramazani S.A., Mohammad Mahdavian

Publisher page

Abstract

Abstract In this article, the synthesis procedure of mesoporous carbon nanospheres (MCNSs) using silica hard-templates, doping of the nanospheres with walnut extract, and their impact on active protective properties of an epoxy coating are presented. Field emission scanning electron microscope (FE-SEM) results showed that the synthesis of these nanocontainers was successfully done in spherical form. Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR) results showed that walnut extract as a green inhibitor was doped into the pores of nanocapsules. Corrosion resistance of the mild steel samples in the 3.5 wt.% NaCl solution in the presence and absence of walnut extract was compared. Salt spray and electrochemical impedance spectroscopy (EIS) results proved active protective behavior of the epoxy coating containing the doped MCNSs. It was shown that charge transfer resistance of the bare steel sample enhanced from ˜610 Ω cm2 to ˜4060 Ω cm2 in the presence of WE after 24 h immersion time. Also, the active corrosion protective performance of the scribed coatings was improved ˜1450% in the presence of WE@MCNSs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Polymer composites and self-healing · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Functional and smart coatings for corrosion protection: a review of recent advances10.1016/j.surfcoat.2014.06.031 ↗
2. Oxide nanoparticle reservoirs for storage and prolonged release of the corrosion inhibitors10.1016/j.elecom.2005.04.039 ↗
3. Mechanical and corrosion protection properties of a smart composite epoxy coating with dual-encapsulated epoxy/polyamine in carbon nanospheres10.1021/acs.iecr.8b06306 ↗
4. A study on the corrosion inhibition properties of silane-modified Fe2O3 nanoparticle on mild steel and its effect on the anticorrosion properties of the polyurethane coating10.1007/s11998-014-9631-6 ↗
5. The application of benzimidazole and zinc cations intercalated sodium montmorillonite as smart ion exchange inhibiting pigments in the epoxy ester coating10.1016/j.corsci.2015.02.007 ↗
6. Corrosion protection of Zn-phosphate containing water borne dispersion coatings on steel. Part 1: design and analysis of model water based latex films on iron substrates10.1016/j.corsci.2006.01.006 ↗
7. Facile synthesis of magnetic mesoporous hollow carbon microspheres for rapid capture of low-concentration peptides10.1021/am502712a ↗
8. Fabrication and characterization of layered double hydroxide/silane nanocomposite coatings for protection of mild steel10.1016/j.jtice.2017.08.015 ↗
9. Electrochemical investigations of the corrosion protection properties of an epoxy-ester coating filled with cerium acetyl acetonate anticorrosive pigment10.1149/2.0231713jes ↗
10. Alibakhshi · J. Alloys Compd. · 2018 · 762 · 73010.1016/j.jallcom.2018.05.172 ↗
11. Evaluation of the corrosion protection properties of an epoxy coating containing sol–gel surface modified nano-zirconia on mild steel10.1039/C5RA02127H ↗
12. The effect of sol–gel surface modified silver nanoparticles on the protective properties of the epoxy coating10.1039/C5RA27729A ↗
13. Nontoxic anticorrosion pigments of the spinel type compared with condensed phosphates10.1016/0143-7208(95)00069-0 ↗
14. Synthesis and characterization of an advanced layer-by-layer assembled Fe3O4/polyaniline nanoreservoir filled with Nettle extract as a green corrosion protective system10.1016/j.jiec.2017.08.032 ↗
15. Hollow mesoporous zirconia nanocontainers for storing and controlled releasing of corrosion inhibitors10.1016/j.ceramint.2014.03.016 ↗
16. Assessment of the smart self-healing corrosion protection properties of a water-base hybrid organo-silane film combined with non-toxic organic/inorganic environmentally friendly corrosion inhibitors on mild steel10.1016/j.jclepro.2019.02.149 ↗
17. Corrosion inhibition performance and healing ability of a hybrid silane coating in the presence of praseodymium (III) cations10.1149/2.0841811jes ↗
18. Self-healing gels based on constitutional dynamic chemistry and their potential applications10.1039/C4CS00219A ↗
19. Towards development of a self-healing composite using a mendable polymer and resistive heating10.1177/0021998308097280 ↗
20. Self-healing materials10.1002/adma.201003036 ↗
21. Layer-by-layer assembled nanocontainers for self-healing corrosion protection10.1002/adma.200502053 ↗
22. Active anticorrosion coatings with halloysite nanocontainers10.1021/jp076188r ↗
23. “Smart” coatings for active corrosion protection based on multi-functional micro and nanocontainers10.1016/j.electacta.2012.04.095 ↗
24. Synthesis and cation-exchange behavior of expanded MoS 2 nanosheets for anticorrosion applications10.1016/j.matpr.2018.04.165 ↗
25. Nitrogen-doped hollow carbon spheres wrapped with graphene nanostructure for highly sensitive electrochemical sensing of parachlorophenol10.1016/j.bios.2016.06.034 ↗
26. Fabrication and characterization of graphene-based carbon hollow spheres for encapsulation of organic corrosion inhibitors10.1016/j.cej.2018.06.063 ↗
27. Chemical synthesis of carbon materials with intriguing nanostructure and morphology
28. Hollow carbon spheres, synthesis and applications—a review10.1039/C6TA03802F ↗
29. General method for the synthesis of hollow mesoporous carbon spheres with tunable textural properties10.1021/acsami.5b02580 ↗
30. Advanced micro/nanocapsules for self-healing smart anticorrosion coatings10.1039/C4TA04791E ↗
31. Green inhibitors for corrosion protection of metals and alloys: an overview10.1155/2012/380217 ↗
32. Electrochemical noise investigation of Aloe plant extract as green inhibitor on the corrosion of stainless steel in 1M H2SO410.1016/j.jiec.2014.02.041 ↗
33. Synthesis and characterization of an effective green corrosion inhibitive hybrid pigment based on zinc acetate-Cichorium intybus L leaves extract (ZnA-CIL.L): electrochemical investigations on the synergistic corrosion inhibition of mild steel in aqueous10.1016/j.dyepig.2016.12.002 ↗
34. Experimental and computational studies of Nicotiana tabacum leaves extract as green corrosion inhibitor for mild steel in acidic medium10.1016/j.aej.2015.03.022 ↗
35. Azadirachta indica leaves extract as inhibitor for microbial corrosion of copper by Arthrobacter sulfureus in neutral pH conditions—a remedy to blue green water problem10.1016/j.jtice.2016.04.007 ↗
36. Electrochemical and surface characterizations of morus alba pendula leaves extract (MAPLE) as a green corrosion inhibitor for steel in 1M HCl10.1016/j.jtice.2016.02.027 ↗
37. Eco‐friendly corrosion inhibitors: the inhibitive action of Delonix Regia extract for the corrosion of aluminium in acidic media10.1108/00035590710762357 ↗
38. Inhibition of aluminum corrosion using Opuntia extract10.1016/S0010-938X(03)00066-0 ↗
39. Khillah extract as inhibitor for acid corrosion of SX 316 steel10.1016/j.apsusc.2005.11.066 ↗
40. A.Y.E.L. Etre, Natural Honey As Corrosion Inhibitor for Metals and Alloys. 1. Copper in Neutral Aqueous Solution, Corros. Sci. J. 40 1845-1850.10.1016/S0010-938X(98)00082-1 ↗
41. Influence of solvent on the antioxidant and antimicrobial properties of walnut (Juglans regia L.) green husk extracts10.1016/j.indcrop.2012.05.021 ↗
42. Total phenols, antioxidant potential and antimicrobial activity of walnut (Juglans regia L.) green husks10.1016/j.fct.2008.03.017 ↗
43. Persian Liquorice extract as a highly efficient sustainable corrosion inhibitor for mild steel in sodium chloride solution10.1016/j.jclepro.2018.11.053 ↗
44. Wang · 2016
45. Phenolics of green husk in mature walnut fruits
46. Synthesis of ultrathin hollow carbon shell from petroleum asphalt for high-performance anode material in lithium-ion batteries10.1016/j.cej.2015.10.102 ↗
47. Ordered mesoporous silica with large cage-like pores: structural identification and pore connectivity design by controlling the synthesis temperature and time10.1021/ja0283347 ↗
48. Investigation of the effect of nanosilica on rheological, thermal, mechanical, structural, and piezoelectric properties of PVDF nanofibers fabricated using electrospinning technique10.1021/acs.iecr.7b02622 ↗
49. In-situ preparation and characterization of ultra-high molecular weight polyethylene/diamond nanocomposites using Bi-supported Ziegler-Natta catalyst: effect of nanodiamond silanization10.1016/j.mtcomm.2017.12.011 ↗
50. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗