Polyester-epoxy resin/conducting polymer/barium sulfate hybrid composite as a smart eco-friendly anti-corrosive powder coating
Source abstract
Abstract
Abstract This study presents new smart eco-friendly and environmentally acceptable conducting polymer composites. These composites represent high efficient anti-corrosive coatings based on (toluidines and phenylenediamines) /BaSO4 polymer composites for steel protection. These polymer composites were prepared by in-situ chemical oxidative polymerization of (ortho, meta or para) toluidines and phenylenediamines monomers each alone in the presence of BaSO4 extender pigment. The polymerization process was carried out using ammonium peroxydisulphate as an initiator at 0-5 °C. The prepared composites were characterized using spectrophotometric measurements (FTIR, XRD, EDX, SEM), in addition to thermal analysis (DSC & TGA). Small doses of these composites (not exceed 2%) were incorporated into powder coating formulations. The coating formulations including the (toluidines or phenylenediamines / BaSO4) polymer composites were evaluated as corrosion inhibitors. The coated steel panels were examined in a salt spray cabinet for 1500 h with a continuous follow up every 200-300 h. The coating formulations containing conducting polymer/BaSO4 composites achieved impressive and high performance effect in protecting steel panels from corrosion compared with the blank sample. Moreover, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization results also confirmed the high performance corrosion protection properties of polyester/epoxy/conducting polymers/BaSO4 hybrid composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Analytical Chemistry and Sensors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Room-temperature cured hydrophobic epoxy/graphene composites as corrosion inhibitor for cold-rolled steel10.1016/j.carbon.2013.08.052 ↗
2. Synergistic effect of nanosize and irradiation on epoxy/conducting poly(o-phenyl diamine) nanospheres composite coatings: Synthesis, characterization and corrosion protective performance10.1016/j.matchemphys.2017.10.044 ↗
3. The application of benzimidazole and zinc cations intercalated sodium montmorillonite as smart ion exchange inhibiting pigments in the epoxy ester coating10.1016/j.corsci.2015.02.007 ↗
4. Tunable Negative Permittivity in Flexible Graphene/PDMS Metacomposites10.1021/acs.jpcc.9b06753 ↗
5. Negative permittivity derived from inductive characteristic in the percolating Cu/EP metacomposites10.1016/j.jmst.2019.07.015 ↗
6. Polyaniline nano-composites via in situ emulsion polymerization based on montmorillonite: Preparation and characterization10.1016/j.arabjc.2014.01.001 ↗
7. Weakly negative permittivity and low frequency dispersive behavior in graphene/epoxy metacomposites10.1007/s10854-019-01846-4 ↗
8. Carbon nanospheres induced high negative permittivity in nanosilver-polydopamine metacomposites10.1016/j.carbon.2019.03.028 ↗
9. Electromagnetic Interference Shielding Polymers and Nanocomposites - A Review10.1080/15583724.2018.1546737 ↗
10. Amino graphene oxide/dopamine modified aramid fibers: Preparation, epoxy nanocomposites and property analysis10.1016/j.polymer.2019.02.021 ↗
11. An overview of stretchable strain sensors from conductive polymer nanocomposites10.1039/C9TC03655E ↗
12. Reduced Graphene Oxide Heterostructured Silver Nanoparticles Significantly Enhanced Thermal Conductivities in Hot-Pressed Electrospun Polyimide Nanocomposites10.1021/acsami.9b10161 ↗
13. Super light 3D hierarchical nanocellulose aerogel foam with superior oil adsorption10.1016/j.jcis.2018.10.038 ↗
14. Polyaniline and poly (m-toluidine) prepared by inverse emulsion pathway as corrosion inhibitors in surface coatings10.1108/03699421011055545 ↗
15. Graphene oxide-modified polyaniline pigment for epoxy based anti-corrosion coatings10.1007/s11696-017-0146-3 ↗
16. Facile fabrication of super hydrophobic polyaniline structures and their anticorrosive properties
17. Corrosion protection of mild-steel by coatings containing polyaniline10.1016/0379-6779(94)03204-J ↗
18. Synthesis and characterization of corrosion protective poly(2,5-dimethylaniline) coatings on copper10.1016/j.apsusc.2006.02.007 ↗
19. Self-cleaning performance of super hydrophobic hybrid nanocomposite coatings on Al with excellent corrosion resistance10.1016/j.mseb.2016.06.001 ↗
20. pH responsive Ce(III) loaded polyaniline nanofibers for self-healing corrosion protection of AA2024-T310.1016/j.porgcoat.2016.04.046 ↗
21. In situ synthesis of polyaniline-camphor sulfonate particles in an epoxy matrix for corrosion protection of mild steel in NaCl solution10.1016/j.corsci.2014.04.018 ↗
22. Corrosion protection of mild steel using sulfonic and phosphonic acid-doped polyanilines10.5006/1.3277639 ↗
23. Study of epoxy and alkyd coatings modified with emeraldine base form of polyaniline10.1016/j.porgcoat.2007.01.005 ↗
24. Corrosion protection of low carbon steel with polyaniline: passivation or inhibition10.1016/j.cap.2003.10.014 ↗
25. Polyaniline nanofibers: a unique polymer nanostructure for versatile applications10.1021/ar800080n ↗
26. weathering characteristics of epoxy-ester paints10.1016/j.porgcoat.2006.02.010 ↗
27. Anticorrosion efficiency of organic coatings depending on the pigment volume concentration of polyaniline phosphate10.1016/j.porgcoat.2008.06.005 ↗
28. Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminum 2024 alloy in neutral, alkaline and acidic solutions10.1016/j.electacta.2010.12.032 ↗
29. Application of polyaniline/nylon composites coating for corrosion protection of steel10.1007/s11998-008-9140-6 ↗
30. Hybrid nanocomposite from aniline and CeO2 nanoparticles: surface protective performance on mild steel in acidic environment10.1016/j.apsusc.2015.01.002 ↗
31. Poly(N-methyl aniline) thin films on copper: synthesis, characterization and corrosion protection10.1016/j.tsf.2011.02.084 ↗
32. Synthesis and electrochemical properties of poly(2,3-dimethylaniline)/polyaniline composites10.1002/pc.23061 ↗
33. Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization10.1016/j.synthmet.2014.09.003 ↗
34. Soluble conducting poly(aniline-co-ortho toluidine) copolymer as corrosion inhibitor for carbon steel in 3% NaCl solution10.1016/j.desal.2008.10.024 ↗
35. Preparation of poly(o-toluidine)/nano ZnO/epoxy composite coating and evaluation of its corrosion resistance properties10.1016/j.synthmet.2016.01.021 ↗
36. Enhanced anticorrosive properties of tailored poly(aniline-anisidine)/ chitosan/SiO2 composite for protection of mild steel in aggressive marine conditions10.1016/j.porgcoat.2018.02.014 ↗
37. Deformation mechanism of epoxy/clay nanocomposite10.1016/j.eurpolymj.2006.11.028 ↗
38. Corrosion protection of magnesium ZM 21 alloy with polyaniline–TiO2 composite containing coatings10.1016/j.porgcoat.2007.04.004 ↗
39. Effect of polyaniline–montmorillonite nanocomposite powders addition on corrosion performance of epoxy coatings on Al 500010.1016/j.surfcoat.2011.07.012 ↗
40. Comparison of polyaniline primers prepared with different dopants for corrosion protection of steel10.1016/S0300-9440(03)00111-5 ↗
41. Preparation and corrosion resistance of nanostructured PVC/ZnO–polyaniline hybrid coating
42. Study of PANI–MeSA conducting polymer dispersed in UV-curing polyester acrylate on galvanized steel as corrosion protection coating10.1016/j.porgcoat.2010.10.011 ↗
43. High performance anticorrosive paint formulations based on phosphate pigments10.1108/03699420410546917 ↗
44. Studying the effects of micro and Nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel10.1016/j.porgcoat.2011.03.026 ↗
45. Boron phosphate/poly(p-phenylenediamine) as a corrosion inhibitive system for steel protection10.21608/ejchem.2018.4184.1373 ↗
46. High corrosion protection of a polyaniline/organophilic montmorillonite coating for magnesium alloys10.1016/j.porgcoat.2013.01.008 ↗
47. Super hydrophobic surfaces for corrosion protection: a review of recent progresses and future directions10.1007/s11998-015-9744-6 ↗
48. Dual-action smart coatings with a self-healing super hydrophobic surface and anti-corrosion properties10.1039/C6TA10903A ↗
49. Organic inorganic hybrids-directed ternary NiFeMoS anemone-like nanorods with scaly surface supported on nickel foam for efficient overall water splitting10.1016/j.cej.2017.10.074 ↗
50. Advances in draw solutes for forward osmosis: hybrid organic-inorganic nanoparticles and conventional solutes10.1016/j.cej.2016.10.079 ↗
51. Organic/inorganic interpenetrated hybrids based on cationic polymer and hydrous zirconium oxide for arsenate and arsenite removal10.1016/j.cej.2015.11.051 ↗
52. Facile synthesis of smart nanocontainers as key components for construction of self-healing coating with super hydrophobic surfaces10.1186/s11671-016-1444-3 ↗
53. Self-healing, super hydrophobic coating based on mechanized silica nanoparticles for reliable protection of magnesium alloys10.1039/C6TA02575G ↗
54. Anticorrosion properties of smart coating based on polyaniline nanoparticles/epoxy-ester system10.1016/j.porgcoat.2012.06.003 ↗
55. High performance anti-corrosive powder coatings based on phosphate pigments containing poly(o-aminophenol)10.1016/j.porgcoat.2014.09.021 ↗
56. 2007
57. 2008 · 1
58. 2002
59. 2013
60. ASTM D3359 · 2010
61. ASTM B117 · 2007
62. ASTM D610-08 · 2008
63. ASTM D714-02 · 2009
64. Conducting composites prepared by the reduction of silver ions with poly(p- phenylenediamine)10.1002/pi.4817 ↗
65. New terpolymer matrix microcomposites for heavy metal removal10.1080/10601325.2019.1617635 ↗
66. Chemical oxidative polymerization of aminodiphenylamines10.1021/jp710963e ↗
67. Polyaniline-vanadium oxide hybrid hierarchical architectures assembled from nanoscale building blocks b homogeneous polymerization10.1002/pi.2677 ↗
68. Electrorheological performances of poly(o-toluidine) and p-toluenesulfonic acid doped poly(o-toluidine) suspensions10.1007/s00396-015-3523-x ↗
69. Variations in infrared spectra, molecular symmetry and site symmetry of sulfate minerals
70. Study on the preparation and formation mechanism of barium sulphate nanoparticles modified by different organic acids10.1007/s12039-007-0043-3 ↗
71. Morphology control of barium sulfate by PEOPpo-PEO as crystal growth modifier10.1016/j.colsurfa.2005.02.025 ↗
72. Thermal stability and glass transition behavior of PANI/a-Al2O3 composites10.1007/s10973-007-8626-2 ↗
73. A review of microvalves10.1088/0960-1317/16/5/R01 ↗
74. Electrochemical design of a new nanosensor based on cobalt nanoparticles, chitosan and MWCNT for the determination of daclatasvir: a hepatitis C antiviral drug10.1039/C6RA25826C ↗
75. Electrochemical behavior of a novel nano-composite coat on Ti alloy in phosphate buffer solution for biomedical applications10.1039/C6RA01064D ↗
76. Least-squares variance analysis method for shape and depth estimation from gravity data10.1088/1742-2132/3/2/005 ↗
77. Preparation and characterization of a nanoparticles modified chitosan sensor and its application for the determination of heavy metals from different aqueous media10.1016/S1452-3981(23)14797-3 ↗
78. A least-squares minimization approach for model parameters estimate by using a new magnetic anomaly formula10.1007/s00024-015-1168-9 ↗
79. A rapid technique for estimating the depth and width of a two-dimensional plate from self-potential data10.1088/1742-2132/8/3/005 ↗
80. A novel electrochemical nicotine sensor based on cerium nanoparticles with anionic surfactant10.1039/C5RA06024A ↗