journal article·2020-05

Naphthyl-based acylphosphine oxide photoinitiators with high effiency and low migration

Yaoyao Liu, Tingting Wang, Chuanbao Xie, Xiujuan Tian, Liang Song, Lei Liu, Zhongwei Wang, Qing Yu

Publisher page

Abstract

Abstract A series of new naphthyl-based acylphosphine oxides (N1–N3) have been designed and synthesized. The obtained compounds could be used in the photo-initiated free radical polymerization (FRP). The performances of N1–N3 in the FRP of trimethylolpropane triacrylate (TMPTA) and their UV–vis spectra were evaluated and compared with 2,4,6-trimethyl(phenyl)diphenyl oxide (TPO, a commercial photoinitiator). Results showed that N1–N3 possessed higher molar absorption coefficients and wider absorption wavelength than TPO. Under the same reaction conditions, N3 exhibited the best double bond conversion (DC) of TMPTA in the tested photoinitiators. Moreover, the calculated migration of N1–N3 of the solidified samples was 1/7, 1/3 and 1/23 of TPO, indicating the lower migration properties. Possible reasons of the performance of N1∼N3 were proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photopolymerization techniques and applications · Advanced Polymer Synthesis and Characterization · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Effect of addition of cellulose nanocrystals to wood coatings on color changes and surface roughness due to accelerated weathering10.1007/s11998-014-9634-3 ↗
2. Monomer-to-polymer conversion and micro-tensile bond strength to dentine of experimental and commercial adhesives containing diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide or a camphorquinone/amine photo-initiator system10.1016/j.jdent.2013.07.007 ↗
3. Coating performance and characteristics for UV-curable aliphatic urethane acrylate coatings containing norrish type I photoinitiators
4. Sundaram · 2009
5. High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles
6. Photoinitiators: a food safety review
7. Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths10.1016/j.jdent.2015.08.015 ↗
8. Photoinitiated polymerization: advances, challenges, and opportunities10.1021/ma1007545 ↗
9. Rational design of acyldiphenylphosphine oxides as photoinitiators of radical polymerization10.1021/acs.macromol.9b01724 ↗
10. Photolysis of acylphosphine oxides II: the influence of methyl substitution in benzoyldiphenylphosphine oxides10.1016/0047-2670(86)85012-2 ↗
11. Acylphosphine oxides as photoinitiators for pigmented coatings
12. UV-Vis spectra and photoinitiation behaviors of acylphosphine oxide and bisacylphosphine oxide derivatives in unfilled, light-cured dental resins10.4012/dmj.27.765 ↗
13. Research progress in photoinitiator for LED-curable system
14. One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift10.1002/pola.22078 ↗
15. New UV LED curing approach for polyacrylamide and poly(N-isopropylacrylamide) hydrogels10.1039/C7NJ00176B ↗
16. Photopolymerization upon LEDs: new photoinitiating systems and strategies10.1039/C5PY00258C ↗
17. Blue-to-red light sensitive push-pull structured photoinitiators: indanedione derivatives for radical and cationic photopolymerization reactions10.1021/ma4005082 ↗
18. A. Henne, A. Hesse, G. Heil, G. Schornick, DE 3034697, BASF AG, 1982.
19. J.P. Wolf, G. Hug, WO 03019295, CIBA SC Holding AG, 2003.
20. A novel acyl phosphine compound as difunctional photoinitiator for free radical polymerization10.1016/j.porgcoat.2019.05.021 ↗
21. Low migration type I photoinitiators for biocompatible thiol-ene formulations10.1016/j.eurpolymj.2016.10.040 ↗
22. Migration kinetics of four photoinitiators from paper food packaging to solid food simulants10.1080/19440049.2017.1331470 ↗
23. Naphthalimide based methacrylated photoinitiators in radical and cationic photopolymerization under visible light10.1039/c3py00766a ↗
24. Effective catalyst for oxidation synthesisof 2,4,6-trimethylbenzoyldipenylphosphine oxide: V/MCM-4110.1007/s10562-018-2299-2 ↗
25. Hydrophilic polymeric acylphosphine oxide photoinitiators/crosslinkers for in vivo blue-light photopolymerization10.1021/bm015584r ↗
26. Chemical aspects of self-etching enamel-dentin adhesives: asystematic review10.1016/j.dental.2005.05.001 ↗
27. UV-VIS spectra and photoinitiation behaviors of acylphosphine oxide and bisacylphosphine oxide derivatives in unfilled, light-cured dental resins10.4012/dmj.27.765 ↗
28. On the photolysis of acylphosphine oxides: 1. laser flash photolysis studies with 2,4,6-trimethylbenzoyldiphenylphosphine oxide10.1016/0032-3861(85)90069-2 ↗
29. Development of a method to study the migration of six photoinitiators into powdered milk10.1021/jf703786e ↗