journal article·2019-09Open access

The effect of ageing on cathodic protection shielding by fusion bonded epoxy coatings

Mauricio Latino, Facundo Varela, Yongjun Tan, Maria Forsyth

Abstract

Abstract Cathodic protection (CP) permeable coatings are commonly perceived in the pipeline industry as advantageous in terms of corrosion protection in a coating disbondment scenario, since CP currents through the coating could create an alkaline pH capable of inducing steel passivation. The CP current permeability of fusion bonded epoxy (FBE) coatings in as new condition was recently evaluated and found to be very low. This paper explores the possible effects of ageing and, in particular, water uptake on CP current permeability. FBE films were hydrothermally aged for up to seven months. Water uptake was found to increase drastically over the first three months and then reach a plateau. In addition to weight changes, water uptake and other chemical changes were evaluated through Fourier-transform infrared spectroscopy and differential scanning calorimetry analysis. CP current permeability of aged FBE coatings had a significant increase in relation to unaged samples. However, experiments also suggested that FBE coatings were partially permeable to OH− and/or H+ which limited their ability to produce the high pH environment required for steel passivation. This indicates that the increase in CP current conduction as a result of ageing is not the likely cause for the low corrosion risk observed in service for disbonded FBE coatings. However, low corrosion risk conditions could still be achieved if pinholes are developed in service. The effect of artificial pinholes on FBE coatings was tested and it was found to drastically increase the CP current permeability, allowing a rise of pH to values sufficiently alkaline for steel passivation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. An overview of major methods for inspecting and monitoring external corrosion of on-shore transportation pipelines10.1179/1743278215Y.0000000013 ↗
2. E.P. Inc · 1999
3. Fusion bonded epoxy mainline and field joint coatings performance from the X100 field trial – a case study10.1016/j.ijpvp.2012.01.003 ↗
4. Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media10.1016/S0011-9164(02)00980-3 ↗
5. M. Pourbaix, J. Van Muylder, Nd. Zoubov, c. Centre belge d’étude de la, Atlas d’équilibres électrochimiques : [à 25° C], par Marcel Pourbaix, … En collaboration avec Nina de Zoubov, Jean Van Muylder, Gauthier-Villars et Cie), Paris, 1963.
6. Pitting corrosion of nominally protected land-based pipelines
7. Review of codes & standards on electrically resistive coatings & what that means to shielding
8. Study of cathodic protection shielding under coating disbondment on pipelines10.1016/j.corsci.2015.07.012 ↗
9. Understanding mesh-backed coating system and non-shielding
10. Pipeline coating failure - not always what you think it is
11. Coatings used in conjuction with cathodic protection - shielding vs non-shielding pipeline coatings
12. Two-layer fusion-bonded-epoxy coating
13. Kehr · 2003
14. Corrosion beneath disbonded coatings: a review
15. Beavers · 1992
16. EMAT, pipe coatings, corrosion control and CP shielding
17. An overview on cathodic shielding produced by disbonded coatings
18. Self-validating electrochemical methodology for quantifying ionic currents through pipeline coatings10.1016/j.porgcoat.2018.03.018 ↗
19. Characterization of the permeability of a high performance composite coating to cathodic protection and its implications on pipeline integrity10.1016/j.porgcoat.2011.05.015 ↗
20. The plasticization of an epoxy resin by dibutylphthalate and water10.1002/pen.760241610 ↗
21. Aging effect on thermal, mechanical and tribological behaviour of polymeric coatings used for pipeline application10.1016/j.jmatprotec.2007.10.062 ↗
22. Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectra10.1016/0032-3861(93)90254-8 ↗
23. The glass transition temperature of an epoxy resin and the effect of absorbed water10.1007/BF00284406 ↗
24. Investigation of the long term effects of moisture on carbon fibre and epoxy matrix composites10.1016/j.compscitech.2012.01.010 ↗
25. Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X ↗
26. New aspects of aging in epoxy networks. II. Hydrothermal aging10.1002/app.13093 ↗
27. Thermal transition effects and electrochemical properties in organic coatings: part 1 — initial studies on corrosion protective organic coatings10.5006/1.3284797 ↗
28. The barrier properties of paint coatings10.1016/0033-0655(91)80001-Y ↗
29. Quispe · 2019
30. Impact of aging processes on anticorrosion properties of thick polymer coatings for steel pipelines
31. Hygrothermal ageing of epoxy based coatings10.1007/BF00543733 ↗
32. Environmental degradation of the electrical and thermal properties of organic insulating materials10.1007/BF01174713 ↗
33. Studies of a new accelerated evaluation method for coating corrosion resistance — thermal cycling testing10.1016/S0300-9440(00)00106-5 ↗
34. The effect of time and aging temperature on structural and mechanical properties of pipeline coating10.1016/j.matdes.2008.09.003 ↗
35. On the peel behavior of polymer coating–steel system: effect of hygrothermal aging10.1002/adv.20188 ↗
36. Hydrothermal ageing of X65 steel specimens coated with 100% solids epoxy10.1016/j.porgcoat.2013.06.002 ↗
37. Characterizing water sorption in 100% solids epoxy coatings10.1016/j.porgcoat.2013.03.011 ↗
38. Evaluation of thick organic coatings degradation in seawater using cathodic protection and thermally accelerated tests10.1016/j.porgcoat.2004.09.007 ↗
39. ASTM · 2018
40. Varela · 2015
41. Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature10.1016/S0032-3861(98)00791-5 ↗
42. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy10.1016/S0032-3861(98)00790-3 ↗
43. Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing10.1016/S0032-3861(97)10060-X ↗
44. Effect of hygrothermal aging on the mechanical properties of fluorinated and nonfluorinated clay-epoxy nanocomposites
45. Irreversible interactions between water and DGEBA/DDA epoxy resin during hygrothermal aging10.1002/(SICI)1097-4628(19970718)65:3<449::AID-APP4>3.0.CO;2-H ↗
46. Lightner · 2013
47. Fusion-bonded epoxy composite coatings on chemically functionalized API steel surfaces for potential deep-water petroleum exploration10.1186/s40563-015-0052-2 ↗
48. FTIR study of bonding between a thermoplastic healing agent and a mendable epoxy resin10.1016/j.vibspec.2009.09.005 ↗
49. Investigation of water absorption characteristics of nano-gelcoat for marine application10.1016/j.porgcoat.2017.10.004 ↗
50. About coatings and cathodic protection: properties of the coatings influencing delamination and cathodic protection criteria10.1016/S0013-4686(97)10193-1 ↗
51. Review of pipe line coating systems from an operators perspective
52. Failure analysis of paints and coatings
53. Fusion bonded epoxy - a field proven fail safe coating system
54. In situ measurement of pipeline coating integrity and corrosion resistance losses under simulated mechanical strains and cathodic protection10.1016/j.porgcoat.2016.08.007 ↗