Active corrosion performance of magnesium by silane coatings reinforced with polyaniline/praseodymium
Source abstract
Abstract
Abstract In recent years, many researches are conducted to find a good replacement for conversion coatings due to envirenmental issues. Silane-based coatings containing corrosion inhibitors can be good candidates. In this study, a composite containing praseodymium (Pr) and polyaniline (PANI) with different ratios was synthesized and prepared. SEM and FE-SEM images along with EDS and MAP were prepared to investigate the synthesis and confirmation of formation of PANI and Pr structure. Different concentrations of inhibitors were used and dispersed in the silane hybrid matrix and deposited it by dipping in an AZ31 magnesium alloy. The results of the identification and analysis indicate the formation of composite of these two organic-inorganic inhibitors and the replacement of praseodymium particles in the aniline structure. Subsequently, anti-corrosion properties of this composite in a 3.5 % solution were evaluated. Adding Pr-PANI to the silane coating resulted in an increase in contact angle. This increase in the contact angle of the sample with ratio of 2000 ppm was more than that in the sample with the ratio of 1000 ppm, indicating the presence of more OH groups in the coating. These results confirm the output of FT-IR and TGA data. In addition, the magnesium sample coated with silane was completely degraded after 24 h and the corrosion products are observed on the sample, but the coating of silane samples with Pr-PANI was less damaged after 24 h and also the sample with concentration of 2000 ppm of this inhibitor showed better performance than other concentrations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection condition in marine environments10.1016/j.electacta.2006.01.054 ↗
2. Caffeic acid as a green corrosion inhibitor for mild steel10.1016/j.corsci.2008.12.013 ↗
3. 4-Aminoantipyrine as an inhibitor of mild steel corrosion in HCl solution10.1023/A:1003450818083 ↗
4. Geddie · 2011
5. Overview: the potential of silanes for chromate replacement in metal finishing industries10.1007/s11201-005-4407-6 ↗
6. A surface analytical study of functionalised mild steel for adhesion promotion of organic coatings10.1016/S0300-9440(02)00165-0 ↗
7. Sol-gel synthesis, characterization and electrochemical corrosion behavior of S-N-C-doped TiO2 nano coating on copper10.1016/j.molliq.2018.06.056 ↗
8. Corrosion protection properties of organofunctional silanes—an overview10.1016/S1007-0214(05)70134-6 ↗
9. Organic–inorganic hybrid coatings for corrosion protection10.1016/S0022-3093(01)00818-3 ↗
10. Enhanced anti-corrosive properties of electrosynthesized polyaniline/zeolite nanocomposite coatings on steel
11. Electrosynthesis of poly(ortho-phenetidine) coatings on steel and investigation of their corrosion protection properties10.1134/S2070205118010276 ↗
12. Controlled growth of hollowpolyaniline structures: from nanotubes to microspheres10.1016/j.polymer.2013.07.071 ↗
13. Phosphating process of AZ31 magnesium alloy and corrosion resistance of coatings10.1016/S1003-6326(06)60382-8 ↗
14. Park HM, Magnesium alloy engine block: US Patent, 20100050977A1 [P], 2010-03-04.
15. Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route10.1016/j.corsci.2010.04.002 ↗
16. pH responsive Ce (III) loaded polyaniline nanofibers for self-healing corrosion protection of AA2024-T310.1016/j.porgcoat.2016.04.046 ↗
17. Self-healing active anticorrosion coatings with polyaniline.cErium nitrate hollow microspheres10.1016/j.surfcoat.2017.11.054 ↗
18. Study of the effect of different aluminium surface pretreatments on the deposition of thin non‐functional silane coatings10.1002/sia.1735 ↗
19. Effect of substrate cleaning solution pH on the corrosion performance of silane-coated cold-rolled steel10.1163/156856107781393901 ↗
20. Corrosion inhibition performance and healing ability of a hybrid silane coating in the presence of praseodymium (III) cations10.1149/2.0841811jes ↗