journal article·2021-02

Polyurethane coating with heterogeneity structure induced by microphase separation: A new combination of antifouling and cavitation erosion resistance

Haocheng Yang, Milin Zhang, Rongrong Chen, Qi Liu, Jingyuan Liu, Jing Yu, Hongsen Zhang, Peili Liu, Cunguo Lin, Jun Wang

Publisher page

Abstract

Abstract Cavitation erosion and biofouling are the most severe factors of metal materials fatigue failure and degradation in seawater. Herein, a series of hydrophobic fluorinated polyurethane coatings (SFPU-x) with various contents of fluorinated isocyanate prepolymer (FIP) were synthesized via a simple addition reaction for anti-cavitation erosion property combined with biofouling resistance. The microstructure and phase composition of as prepared coatings were analyzed by ATR-IR, SEM, TG, EDS and AFM. The addition of FIP increases the content of hard segments microregion and affects the microphase separation of the coating and induces the construction of surface heterogeneity microstructures. The static water contact angle and water absorption were measured as well. The antifouling tests were conducted using Nitzschia Closterium cell and the fluorescence labeled bovine serum albumin (FITC-BSA) as fouling models. Especially, the SFPU-5 coating with 5% FIP shows excellent antifouling and cavitation erosion resistance abilities due to surface heterogeneity microstructure, the attachment rates of FITC-BSA (1.1 %) and Nitzschia cell (1.3 %) far less than that of SFPU-0 coating (72.3 % and 85.1 %), respectively. Marine field test for 30 days also proven the antifouling properties of the SFPU-5 coating. In addition, there were no obvious holes and cracks on the surface of SFPU-5 after 10 h of cavitation, the cumulative mass loss were 2.7 mg and 2.9 mg in deionized water and in seawater, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Marine Biology and Environmental Chemistry · Polymer composites and self-healing · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Combined wear of slurry erosion, cavitation erosion, and corrosion on the simulated ship surface10.1177/1687814019834450 ↗
2. High-speed visualization of cavitation evolution around a marine propeller10.1007/s12650-018-00540-7 ↗
3. Computational analysis of cavitation structures on a ship propeller
4. High speed observation of damage created by a collapse of a single cavitation bubble10.1016/j.wear.2018.11.004 ↗
5. Cavitation erosion behavior of super-hydrophobic coatings on Al5083 marine aluminum alloy10.1016/j.wear.2019.02.017 ↗
6. Experimental observation of the erosion pattern, pits, and shockwave formation in a cavitating jet10.1016/j.wear.2018.10.014 ↗
7. Ultrasonic cavitation at solid surfaces10.1002/adma.201004494 ↗
8. Collapse of an initially spherical vapour cavity in the neighbourhood of a solid boundary10.1017/S0022112071001058 ↗
9. Evaluation of cavitation erosion resistance of copper alloy in different liquid media10.1002/maco.201709880 ↗
10. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance10.1016/j.wear.2019.01.019 ↗
11. Cavitation erosion resistance of 316L austenitic steel processed by selective laser melting (SLM)
12. Cavitation erosion of plasma-sprayed NiTi coatings10.1016/j.wear.2005.06.002 ↗
13. A comparative study of cavitation Erosion resistance of several HVOF-Sprayed coatings in deionized water and artificial seawater10.1007/s11666-019-00869-x ↗
14. Cavitation erosion of several oxy-fuel sprayed coatings tested in deionized water and artificial seawater10.1016/j.wear.2013.12.026 ↗
15. Corrosion and wear properties of FeCrMnCoSi HVOF coatings10.1016/j.surfcoat.2018.10.101 ↗
16. Cavitation erosion resistance of nanocrystalline TiN coating deposited on stainless steel10.1016/j.wear.2008.02.004 ↗
17. Microwave synthesized composite claddings with enhanced cavitation erosion resistance10.1016/j.wear.2019.01.072 ↗
18. Microwave synthesized complex concentrated alloy coatings: plausible solution to cavitation induced erosion-corrosion10.1016/j.ultsonch.2018.09.004 ↗
19. Study on cavitation erosion resistance and surface topologies of various coating materials used in shipbuilding industry10.1016/j.jiec.2014.12.013 ↗
20. Outstanding cavitation erosion resistance of ultra high molecular weight polyethylene (UHMWPE) coatings10.1016/j.wear.2015.01.077 ↗
21. Research on cavitation erosion and wear resistance performance of coatings10.1016/j.engfailanal.2015.06.003 ↗
22. Correlation of cavitation erosion resistance and mechanical properties of some engineering steels10.1007/s10853-006-5209-8 ↗
23. Erosion and heating of polyurea under cavitating jets10.1016/j.wear.2018.08.019 ↗
24. Hepburn · 2012 · 413
25. Synthesis of PPG-TDI-BDO polyurethane and the influence of hard segment content on its structure and antifouling properties10.1016/j.porgcoat.2016.04.002 ↗
26. Preparation and antifouling property of polyurethane film modified by chondroitin sulfate10.1016/j.apsusc.2016.10.083 ↗
27. Chemical characterization of a marine conditioning film10.1016/j.ibiod.2008.05.004 ↗
28. Conditioning film and initial biofilm formation on ceramics tiles in the marine environment10.1111/j.1574-6968.2007.00809.x ↗
29. Multiple linear regression analysis of bacterial deposition to polyurethane coatings after conditioning film formation in the marine environment10.1099/mic.0.26983-0 ↗
30. Polyurethane films modified with polyaniline-zinc oxide nanocomposites for biofouling mitigation10.1016/j.cej.2018.11.038 ↗
31. Amphiphilic block copolymer/poly(dimethylsiloxane) (PDMS) blends and nanocomposites for improved fouling-release10.1080/08927014.2011.584972 ↗
32. Enhancing the efficacy of fouling-release coatings against fouling by Mytilus galloprovincialis using nanofillers10.1080/08927014.2012.728588 ↗
33. Poly(dimethyl siloxane) (PDMS) network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)-fluoroalkyl side chains for fouling-release coatings. II. Laboratory assays and field immersion trials10.1080/08927014.2012.697897 ↗
34. An experimental investigation of the frictional drag characteristics of nanostructured and fluorinated fouling-release coatings using an axisymmetric body10.1080/08927014.2012.745856 ↗
35. Polyurethanes with amphiphilic surfaces made using telechelic functional PDMS having orthogonal acid functional groups10.1016/j.porgcoat.2012.03.006 ↗
36. A preliminary study on the properties and fouling-release performance of siloxane-polyurethane coatings prepared from poly(dimethylsiloxane) (PDMS) macromers10.1080/08927014.2010.531272 ↗
37. Zwitterionic siloxane-polyurethane fouling-release coatings10.1016/j.porgcoat.2014.07.011 ↗
38. Poly(ethylene) glycol-modified, amphiphilic, siloxane-polyurethane coatings and their performance as fouling-release surfaces10.1007/s11998-016-9862-9 ↗
39. Water resistance of the membranes for UV curable waterborne polyurethane dispersions10.1016/j.porgcoat.2007.05.003 ↗
40. 1992
41. Interfacial thiol-isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation10.1039/C5CC05258K ↗
42. Simultaneous improvement of tensile strength and elongation: an unprecedented observation in the case of hydroxyl terminated polybutadiene polyurethanes10.1021/ie401923e ↗
43. Thiol–isocyanate “click” reactions: rapid development of functional polymeric surfaces10.1039/C0PY00292E ↗
44. Highly conductive Fiber with waterproof and self-cleaning properties for textile electronics10.1021/acsami.8b10217 ↗
45. Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices10.1007/s10856-009-3754-9 ↗
46. FT-IR and XPS studies of polyurethane-urea-imide coatings10.1016/j.porgcoat.2005.11.007 ↗
47. New approach to evaluate microphase separation in segmented polyurethanes containing carbonate macrodiol10.1016/j.eurpolymj.2017.05.046 ↗
48. Quantitative mapping of elastic moduli at the nanoscale in phase separated polyurethanes by AFM10.1016/j.eurpolymj.2010.09.029 ↗
49. Orderly branched anion exchange membranes bearing long flexible multi-cation side chain for alkaline fuel cells10.1016/j.memsci.2019.117247 ↗
50. Small-angle scattering analysis of hard-microdomain structure and microphase mixing in polyurethane elastomers
51. Facile synthesis of a two-tier hierarchical structured superhydrophobic-superoleophilic melamine sponge for rapid and efficient oil/water separation10.1016/j.jcis.2017.07.066 ↗
52. Ultra-durable and transparent self-cleaning surfaces by large-scale self-assembly of hierarchical interpenetrated polymer networks10.1021/acsami.6b03414 ↗
53. Fouling release property of polydimethylsiloxane-based polyurea with improved adhesion to substrate10.1021/acs.iecr.6b01003 ↗
54. Highly efficient polyurethane membrane based on nanocomposite of sulfonated thiacalix[4]arene-sodium alginate for desalination10.1016/j.carbpol.2018.10.066 ↗
55. Correlation of mechanical properties with antifouling efficacy of coatings containing loaded microcapsules
56. Fabrication of epoxy modified polysiloxane with enhanced mechanical properties for marine antifouling application10.1016/j.eurpolymj.2019.05.002 ↗
57. The influence of conditioning film on antifouling properties of the polyurethane film modified by chondroitin sulfate in urine10.1016/j.apsusc.2017.06.314 ↗
58. Magin · Non-Toxic Antifouling Strategies · 2010 · 13 · 36
59. Physical cross-linking starch-based zwitterionic hydrogel exhibiting excellent biocompatibility, protein resistance, and biodegradability10.1021/acsami.6b03098 ↗
60. The adhesion of the barnacle, Balanus improvisus, to poly(dimethylsiloxane) fouling-release coatings and poly(methyl methacrylate) panels: The effect of barnacle size on strength and failure mode10.1163/156856101753213321 ↗
61. A study of the biocide release from antifouling paints10.1016/S0300-9440(01)00246-6 ↗
62. Evaluation of hydrodynamic drag on experimental fouling-release surfaces, using rotating disks10.1080/08927010400011245 ↗
63. Engineered antifouling microtopographies - correlating wettability with cell attachment10.1080/08927010500484854 ↗
64. Testing attachment point theory: diatom attachment on microtextured polyimide biomimics10.1080/08927010500506094 ↗
65. Random copolymer films with molecular-scale compositional heterogeneities that interfere with protein adsorption10.1002/adfm.200900943 ↗
66. Covalent attachment of poly(ethylene glycol) to surfaces, critical for reducing bacterial adhesion10.1021/la034032m ↗
67. Betulin-constituted multiblock amphiphiles for broad-spectrum protein resistance10.1021/acsami.7b16255 ↗
68. Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane): synthesis, characterization, in vitro protein adsorption and platelet adhesion10.1016/S0142-9612(01)00306-4 ↗
69. Antifouling coatings: recent developments in the design of surfaces that prevent fouling by proteins, bacteria, and marine organisms10.1002/adma.201001215 ↗
70. Evolution of microphase separation with variations of segments of sequence-controlled multiblock copolymers10.1021/acs.macromol.7b01831 ↗
71. Surface analysis of fouling‐resistant marine coatings10.1080/08927019209386220 ↗
72. Effects of carbon nanotubes on the mechanical strength of self-polishing antifouling paints10.1016/j.porgcoat.2016.04.020 ↗
73. R.T.J.M.-H. Knapp, Inc., Cavitation, 6 (1970).
74. Hammitt · 1980 · 3
75. Effect of grooves on cavitation around the body of revolution10.1115/1.4000648 ↗
76. Analysis of mechanical and chemical mechanisms on cavitation erosion-corrosion of steels in salt water using electrochemical methods10.1016/j.triboint.2018.04.012 ↗
77. A new methodology to prepare ceramic-organic composite coatings with good cavitation erosion resistance10.1016/j.ultsonch.2018.02.018 ↗