Improving dirt pickup resistance in waterborne coatings using latex blends of acrylic/PDMS polymers
Source abstract
Abstract
Abstract Improving dirt pickup resistance especially in waterborne coatings is critical to future coating innovations. This article focuses on resins used in the coatings with the aim of enhancing dirt pick up resistance. It presents initially optimization of an acrylic (BA-St-AA) copolymer synthesized through free-radical emulsion polymerization and also, a polydimethylsiloxane (PDMS) homopolymer via cationic ring opening macro-emulsion polymerization of octamethyl cyclotetrasiloxane (D4). Concentration of monomers, Type of anionic emulsifiers, impeller stirrer speed and reaction temperature were considered as variables in order to reach a high yield of conversion and colloidal stability. The polymers were characterized using fourier transfer infrared spectroscopy, gel permeation chromatography and particle size analysis. The optimized latexes were then blended in different ratios (0/100–100/0) and the properties of the films were assessed using optical microscopy, Si-mapping EDX analysis, contact angle measurement, water up-take, and color measuremets as well as stress strain analysis. The characterization results revealed latexes with optimized conversion and uni-modal particle size distribution (PSD) were synthesized (PDMS: PSD 25–250 nm, M n 129000, PDI 2.23 and Acrylic: PSD 75–400 nm, M n 61,000, and PDI 4.95). It was found that 10–28 wt% PDMS in blends provides continuous and clear films with low dirt pickup properties. The optimized latex blend film showed a drying time of 25 min, contact angle of 96°, water uptake of 27% after 6 days, tensile strength of 7 MPa, and elongation at break of 690%. The results confirmed that blending acrylic and silicone latexes in bi-modal PSD and optimized ratios leads to a good performance exterior and uniform hydrophobic coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Polymer Synthesis and Characterization · Material Properties and Processing · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. J.V. Koleske, Paint and Coating Testing Manual, Fourteenth Edition of the Gardner-Sward Handbook, ASTM Manual Series: MNL 17, Philadelphia, PA 19103, USA, 1995, pp. 48–49.10.1520/MNL17_14TH-EB ↗
2. Oldering · 1996 · vol. 1
3. J.K. Bardman, R.C. Even, M.S. Frazza, Y. Guo, R. Krasnansky, R.P. Lauer, Dirt pickup resistant coating binder and coatings, Patent US6,258,887B1, 2001.
4. Patton · 1979
5. E.A. Salter, C.D. Meekings, B. Leary, Water-borne soil resistant coatings, Patent US5688853, 1997.
6. A soil resistant treatment for low gloss coatings
7. Dirt pickup on latex paint films
8. Factors affecting dirt pickup in latex paints
9. R.P. Lauer, R.C. Even, D.S. Grecian, R.D. Solomon, Polymeric nanoparticle formulations and their use for improving the dirt pickup resistance of a coating, US. Pat. 7,138,438 B2, 2006.
10. An overview of polymer latex film formation and properties10.1016/S0001-8686(99)00037-8 ↗
11. Keddie · 2010
12. Life cycle assessment of facade coating systems containing manufactured nanomaterials10.1007/s11051-015-2881-0 ↗
13. Study on the preparation and properties of styrene–butyl acrylate–silicone copolymer latices10.1002/app.2178 ↗
14. Environmental-friendly architectural water-borne paint for outdoor application: twenty years of experience in Belarus and Lithuania
15. Facile hydrophobic modification of hybrid poly(urethane-urea)methacrylate aqueous dispersions and films through blending with novel waterborne fluorinated acrylic copolymers10.1007/s00396-011-2565-y ↗
16. Jaeger · 2007 · 61
17. Heilen · 2005 · 75
18. A new approach for self-cleaning silicone-based facade coatings, hydrophobe IV
19. Study on properties of waterborne fluorinated polyurethane/acrylate hybrid emulsion and films10.1007/s10965-014-0460-1 ↗
20. Synthesis, morphology and rheology of core-shell silicone acrylic emulsion stabilized with polymerisable surfactant10.3144/expresspolymlett.2010.82 ↗
21. Miniemulsion copolymerization of methyl methacrylate and butyl acrylate in the presence of vinyl siloxane rubber10.1016/j.colsurfa.2004.04.055 ↗
22. Preparation and properties of core [poly(styrene-n-butyl acrylate)]–shell [poly(styrene–methyl methacrylate–vinyltriethoxide silane)] structured latex particles with self-crosslinking characteristics10.1002/app.23081 ↗
23. Silicone–polyacrylate composite latex particles: particles formation and film properties10.1016/j.polymer.2004.11.063 ↗
24. Acrylic polymer/silica organic–inorganic hybrid emulsions for coating materials: role of the silane, coupling agent10.1002/pola.21574 ↗
25. Synthesis and properties of styrene–butylacrylate emulsion copolymers modified by silane compounds10.1002/app.29555 ↗
26. Morphological prediction and its application to the synthesis of polyacrylate/polysiloxane core/shell latex particles10.1002/app.1329 ↗
27. Preparation of polyacrylate-polysiloxane core-shell latex particles10.1002/(SICI)1099-1581(199612)7:12<888::AID-PAT598>3.0.CO;2-5 ↗
28. A novel acrylic resin containing methoxysilane moiety and its application in antifouling coating10.4028/www.scientific.net/AMR.79-82.659 ↗
29. The correlation of silicone incorporation into hybrid acrylic coatings with the resulting hydrophobic and thermal properties10.1021/ma8006015 ↗
30. Graft emulsion copolymerization of acrylates and siloxane10.1002/(SICI)1099-1581(199711)8:11<631::AID-PAT691>3.0.CO;2-K ↗
31. Wypych · 2005
32. Bieleman · 2000 · 174
33. Silicone surfactants
34. Polymer blend systems for water-borne paints10.1016/S0300-9440(98)00021-6 ↗
35. J.A. Vasta, Coating Composition of a blend of a glycidyl Acrylic Polymer and a Reactive Polysiloxane, U.S. Pat. 4,446,259, 1984.
36. Utracki · 1989
37. Mechanical characterization of vinyl acetate based emulsion polymer blends10.1002/1521-3900(200004)155:1<117::AID-MASY117>3.0.CO;2-6 ↗
38. Stability and compatibility in blends of silicone and vinylacrylic polymer emulsions10.1002/pi.4990310409 ↗
39. Film-forming ability and mechanical properties of coalesced latex blends10.1002/(SICI)1099-0488(19970930)35:13<2093::AID-POLB10>3.0.CO;2-# ↗
40. Mechanistic considerations of particle size effects on film properties of hard/soft latex blends10.1007/BF02696096 ↗
41. Polymer blend latex films: morphology and transparency10.1021/ma00127a013 ↗
42. Synthesis and properties of a novel siliconized acrylic monomer containing three reactive sites10.1002/(SICI)1521-3935(19991101)200:11<2501::AID-MACP2501>3.0.CO;2-8 ↗
43. Stable acrylate/triethoxyvinylsilane (VTES) core–shell emulsion with low surface tension made by modified micro-emulsionpolymerization: effect of different mass ratio of MMA/BA in the core and shell10.1016/j.colsurfa.2013.07.028 ↗
44. Preparation and characterization of weather resistant silicone/acrylic resin coatings10.1007/BF02697923 ↗
45. Molecular design and photophysical properties of acylamido side functionalized polysiloxanes with lanthanide ions as luminescent centers10.1002/app.1592 ↗
46. The preparation and surface properties of silicone-grafted acrylic copolymer coatings10.1177/0954008305043822 ↗
47. A novel type of Si-containing acrylic resin: synthesis, characterization, and film properties10.1002/app.25942 ↗
48. Acrylic oligomer for high solid automotive top coating system having excellent acid resistance10.1016/S0300-9440(97)00073-8 ↗
49. Film properties of silicone modified non-aqueous acrylic polymer dispersion10.1016/S0300-9440(01)00254-5 ↗
50. Synthesis of novel silicone modified acrylic resins and their film properties10.1002/pat.857 ↗
51. Synthesis and silicon gradient distribution of emulsifier-free TRIS-containing acrylate copolymer10.1016/j.colsurfa.2010.08.048 ↗
52. A study on emulsion copolymerization of α, ω-diacrylate poly(dimethylsiloxane) containing vinyl ester of versatic acid/vinyl acetate
53. Hybrid copolymer latexes cross-linked with methacryloxy propyl trimethoxy silane. Film formation and mechanical properties10.1016/j.crci.2003.07.011 ↗
54. Keddie · 2010
55. Coyard · 2001
56. Preparation and characterization of inorganic–organic trilayer core–shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles10.1016/j.apsusc.2012.04.121 ↗
57. Y. Chevalier, M. Hidalgo, J.Y. Cavaille, B. Cabane, Film formation in waterborne coatings, ACS Symp. Ser. 648, ACS Washington DC, 1996.
58. Film formation of acrylic latices with varying concentrations of non-film-formation latex particles10.1021/la960046z ↗
59. Film formation of latex blends with bimodal particle size distributions: consideration of particle deformability and continuity of the dispersed phase10.1021/ma991372z ↗
60. Particle size as it relates to the minimum film formation temperature of lattices10.1002/app.1991.070421024 ↗
61. Drying behavior of acrylic latexes10.1016/0033-0655(94)87007-1 ↗
62. Micromechanics of flat-probe adhesion tests of soft viscoelastic polymer films10.1002/(SICI)1099-0488(20000401)38:7<965::AID-POLB7>3.0.CO;2-8 ↗
63. Current understanding of the deformation of latex particles during film formation10.1016/S0300-9440(96)00652-2 ↗
64. Chern · 2008
65. Effect of stirring on the emulsion polymerization of styrene10.1002/app.1972.070160403 ↗
66. Kinetic study on the ring-opening polymerization of octamethylcyclotetrasiloxane (D4) in miniemulsion10.1016/j.polymer.2010.06.038 ↗
67. Kinetics of ring-opening polymerization of octamethylcyclotetrasiloxane in microemulsion10.1016/j.cclet.2013.12.021 ↗
68. Soapless emulsion polymerization of methyl methacrylate in water in the presence of calcium sulfite10.1002/pol.1982.170200411 ↗
69. An overview of polymer latex film formation and properties10.1016/S0001-8686(99)00037-8 ↗
70. Film formation of latex blends with bimodal particle size distributions: consideration of particle deformability and continuity of the dispersed phase10.1021/ma991372z ↗
71. Polymer blend latex films: morphology and transparency10.1021/ma00127a013 ↗
72. Dirt pickup on latex paint films
73. Improving water sensitivity in acrylic films using surfmers10.1021/la047631h ↗
74. Koleske · 1999
75. Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings10.1016/j.porgcoat.2008.08.013 ↗