Synthesis of hydrophobic fluorinated polyurethanes and their properties of resistance to cavitation and wear
Source abstract
Abstract
Abstract Hydrophobic fluorinated polyurethanes (FPU) without hydrophilic CH 2 OH groups were prepared by introducing fluorine with the method of perfluoroalkyl ethanols (TEOH-10) for modification of diphenyl-methane-diisocyanates (MDI) and regulating the dosage and time of the MDI added. The experiment of water resistance indicates that the hydrophobicity of the FPU are very strong, owing to the low surface energy of fluorocarbon chains (-CF 2 CF 3 ) migrating to the surface of material and forming the organic fluorine membrane which was equivalent to the hydrophobic effect of the lotus leaf. Especially when the molar dosage of TEOH-10 was 0.3–0.5 theoretical quantity of MDI, the water absorption of FPU is only between 0.0146% and 0.0182%, and the high cohesive pressure of FPU maintained at 10.31MPa–10.79 MPa after 3200 h’ water soaking. The erosion wear experiment showes that the anti-erosion performance of FPU continuously improved with the increasing of fluorine content, however, the cohesive pressure of FPU continuously reduced with the increasing of fluorine content. Comprehensive consideration of water conservancy and hydropower engineering application requirements of underwater protective coating, when the molar ratio of TEOH-10 versus MDI was about 0.5, the cavitation erosion amount of FPU reduced from 2.3756 × 10 −3 kg to 0.9334 × 10 −3 kg, and the cohesive pressure of FPU stayed over 10 MPa, which can be used as protective coating of flow components under water.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · High voltage insulation and dielectric phenomena · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Forude · J. Basic Eng. · 1967 · 64 · 42
2. Cause analysis and treatment of local cavitation of turbine blade
3. The cavitation erosion corrosion of stainless steel10.1016/0010-938X(90)90001-L ↗
4. Design of anti-cavitation material and coating technology
5. Experimental study on cavitations erosion
6. Study on prediction of sand wear and anti abrasion of hydraulic turbine
7. Feasibility analysis and design for tubular turbine blade based on lifting design method
8. Technology for improving hydraulic turbine performance
9. Comparison of cavitation erosion resistance between irons and steels
10. Correlation of cavitation erosion resistance with mechanical properties of steels
11. Preparation and properties of waterborne polyurethane with hydrophobic branched chain
12. Study on the water repellent silicone-polurethane block copolymers10.3724/SP.J.1105.2012.11064 ↗
13. Hollander · Polym. Sci. · 1967 · 5 · 275710.1002/pol.1967.150051104 ↗
14. Process design of fluorinated polyurethane-urea anionomer aqueous dispersions10.1002/masy.200451404 ↗
15. Synthesis of surface-modifying macromolecules for use in segmented polyurethanes10.1002/(SICI)1097-4628(19961121)62:8<1133::AID-APP1>3.0.CO;2-J ↗
16. Synthesis and characterization of PAMAM dendritic waterborne polyurethane
17. ATR-FTIR studies on the effect of thickness on the crystallization of poly (3-hydroxybutyrate)thin films
18. A Brief Review on 19F NMR
19. Structural investigation of ph enolic resin through 1h nmr analysis
20. Characteristic and adsorption mechanism of hyperbranched collagen fiber toward Cr(VI)10.6023/A12080609 ↗
21. Synthesis and application of polyurethane modified fluorinated polyacrylate
22. Tribological property of textured surface under reciprocating motion
23. Synthesis characterization and in-vitro oxidative stability of α,ω-bis (3-aminopropyl)-poly [(3,3,3-trifluoropropyl) methylsiloxane]modified polyurethaneureas10.3724/SP.J.1105.2010.00001 ↗
24. Abrasion resistance analysis of spray polyurethane elastic coating on turbine blades
25. Theory of adhesion-hysteresis-fatigue of elastomeric tribology and experimental demonstration
26. Surface modification of waterborne polyurethane10.1016/j.colsurfa.2006.05.036 ↗
27. Synthesis and performance of polyurethane with quadruple hydrogen bond units10.3724/SP.J.1105.2012.11185 ↗