journal article·2017-03Open access

Effect of thermally induced denaturation on molecular interaction-response relationships of whey protein isolate based films and coatings

Markus Schmid, Sandra Pröls, Daniel M. Kainz, Felicia Hammann, Uwe Grupa

Abstract

Abstract The functional properties of whey protein isolate (WPI) based films and coatings have been the subject of several studies. However, quantitative information on the molecular interactions is rare. The solubility studies presented here allow qualitative statements to be made about the molecular interactions in WPI-based films. The other objective of this study was to determine the cross-linking density (CLD). Swelling studies were performed on WPI-based films containing different amounts of denatured WPI. The results of the swelling studies showed that the degree of denaturation has a significant influence on the CLD, which is directly proportional to the number of disulfide bonds in the WPI-based network. As a result, the structural stability of the polymer network was improved. The swelling studies showed that there was a significant linear increase in CLD of 1.17·10 −4 mol cm −3 on going from 50% to 100% denatured WPI-based films (0.22·10 −4 mol cm −3 → 1.39·10 −4 mol cm −3 ). The solubility study showed that WPI film solubility is mainly influence by non-covalent bonds up to a degree of denaturation of 75%. In general, there was a correlation between CLD and the mechanical properties of the films. The Younǵs modulus increased by 320% on going from 25% to 100% denatured WPI-based films (26.70 MPa → 85.30 MPa). The CLD had only a minor effect on the barrier properties of the WPI-based films. Thus, this scientific paper provides new knowledge for researchers and material developers because qualitative information about the covalent intermolecular interactions in whey protein isolate based films and coatings has been obtained for the first time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanocomposite Films for Food Packaging · Microencapsulation and Drying Processes · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Determination and quantification of molecular interactions in protein films: a review10.3390/ma7127975 ↗
2. Physical and chemical methods used to enhance the structure and mechanical properties of protein films: a review10.1016/j.jfoodeng.2012.08.021 ↗
3. Physical, chemical and biochemical modifications of protein-Based films and coatings: an extensive review10.3390/ijms17091376 ↗
4. DE Wit · 2001
5. Water vapor permeability, solubility, and tensile properties of heat-denatured versus native whey protein films10.1111/j.1365-2621.1999.tb12276.x ↗
6. Properties of whey protein coated films and laminates as novel recyclable food packaging materials with excellent barrier properties
7. Properties of and mechanisms of protein interactions in films formed from different proportions of heated and unheated whey protein solutions10.1007/s00217-005-0140-9 ↗
8. Effects of thermally induced denaturation on technological-functional properties of whey protein isolate-based films10.3168/jds.2013-7852 ↗
9. Plasticized whey-protein edible films − water-vapor permeability properties10.1111/j.1365-2621.1994.tb06980.x ↗
10. Determination of water/polymer interaction parameter for membrane-forming systems by sorption measurement and a fitting technique10.1016/j.memsci.2005.04.030 ↗
11. Effect of crosslink density on the water-binding capacity of whey protein microparticles10.1016/j.foodhyd.2014.09.030 ↗
12. Properties of cast films made from different ratios of whey protein isolate: hydrolysed whey protein isolate and glycerol10.3390/ma6083254 ↗
13. Protein–Protein interactions during high-Moisture extrusion for fibrous meat analogues and comparison of protein solubility methods using different solvent systems10.1021/jf073343q ↗
14. Protein–protein interactions in high moisture-extruded meat analogs and heat-induced soy protein gels10.1007/s11746-007-1095-8 ↗
15. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-Dye binding10.1016/0003-2697(76)90527-3 ↗
16. Storage time dependent alteration of structure-property relationships of whey protein isolate based films and coatings10.1007/s10853-015-8994-0 ↗
17. Koltzenburg · 2013
18. Treloar · 1975
19. DIN · 2011
20. Mechanical, swelling, and thermal aging properties of marble sludge-natural rubber composites10.1186/2228-5547-3-21 ↗
21. Flory · 1953
22. Preparation and determination of swelling behavior of poly (acrylamide-co-acrylic acid) hydrogels in water10.1002/app.21074 ↗
23. Evaluation of the polymer–solvent interaction parameter χ for the system cured styrene butadiene rubber and toluene10.1016/j.eurpolymj.2007.02.034 ↗
24. Evaluation of the polymer–solvent interaction parameter χ for the system cured polybutadiene rubber and toluene10.1016/j.polymertesting.2009.09.013 ↗
25. Correlation of crosslink densities using solid state NMR and conventional techniques in peroxide-crosslinked EPDM rubber10.1016/j.polymer.2014.10.057 ↗
26. Bower · 2002
27. Ronniger · 2013
28. Denaturation time and temperature effects on solubility, tensile properties, and oxygen permeability of whey protein edible films10.1111/j.1365-2621.2001.tb04625.x ↗
29. Schmid · 2013
30. Drying and denaturation kinetics of whey protein isolate (WPI) during convective air drying process10.1080/07373937.2013.794832 ↗
31. 4 – Whey Proteins
32. Structure and stability of whey proteins
33. Trends in polyurethane elastomer technology
34. Properties of transglutaminase crosslinked whey protein isolate coatings and cast films10.1002/pts.2071 ↗
35. Daniels · 1989
36. Oxygen permeability and mechanical properties of films from hydrolyzed whey protein10.1021/jf000161m ↗
37. Influence of plasticizers on the mechanical and barrier properties of cast biopolymer films
38. Permeation of water vapour, nitrogen, oxygen and carbon dioxide through whey protein isolate based films and coatings—Permselectivity and activation energy10.1016/j.fpsl.2015.08.002 ↗
39. Comparison of oxygen and water vapor permeabilities of whey protein isolate and é-Lactoglobulin edible films10.1021/jf950595v ↗