Hydrophobic epoxy resins modified by low concentrations of comb-shaped fluorinated reactive modifier
Source abstract
Abstract
Abstract Novel comb-shaped fluorinated (meth)acrylate copolymer was synthesized and used as reactive modifier for epoxy resins. The chemical structure of the comb-shaped fluorinated reactive modifier (CFRM) was characterized by GPC, FTIR and 1 HNMR. In addition, a random fluorinated reactive modifier (RFRM) which possessed the same chemical composition but random structure was developed as a contrast modifier. Thorough performances of the modified thermosets modified with these two modifiers were investigated. Surface energy, surface composition and surface morphology were investigated by means of contact angle test, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Compared to the CFRM with RFRM, epoxy thermosets modified with CFRM performed lower surface energy, higher fluorine atomic concentration at the surface and rougher surface morphology. The thermosets modified with CFRM possessed even lower surface energy (18.32 mN/m) than polytetrafluoroethylene (18.50 mN/m) with just adding 0.05 wt% fluorine component (DFHMA structural unit), indicating its high efficiency and effectivess in improvement of surface hydrophobicity. Tensile strength tests and glass transition determined by dynamic mechanical thermal analysis (DMTA) showed that both tensile strength and Tg decreased slightly by incorporation of the two reactive modifier since the sofer segments were incorporated. And thermosets modified with CFRM performed slightly lower Tg than that of RFRM. The influence of the reactive modifier on Shore D hardness and thermal stabilities was not significant due to the low concentrations. The incorporation of the CFRM was more advantageous to lowering water absorption while the optical transmittance deteriorated. The hydrophobic epoxy resins modified with comb-shaped fluorinated reactive modifier might have the potential application in anti-fouling coatings and other occasions requiring low surface energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Hydrophobic benzoxazine-cured epoxy coatings for corrosion protection10.1016/j.porgcoat.2013.03.013 ↗
2. Synthesis, characterization and curing properties of a novel cyclolinear phosphazene-based epoxy resin for halogen-free flame retardancy and high performance10.1039/c2ra20739g ↗
3. Effect of epoxy-silicone copolymer content on the thermal and mechanical properties of cured epoxy resin modified with siloxane10.1039/C4RA09230A ↗
4. Surface modification of epoxy resin with fluorine-containing methacrylic ester copolymers10.1002/app.1993.070471215 ↗
5. Two component silicone modified epoxy foul release coatings: effect of modulus, surface energy and surface restructuring on pseudobarnacle and macrofouling behavior10.1016/j.apsusc.2009.10.084 ↗
6. Synthesis and characterization of novel fluorinated siloxane star-like copolymer with short perfluoroalkyl chain and used for modification the epoxy resin10.1016/j.jfluchem.2013.11.008 ↗
7. Microphase structure, crystallization behavior, and wettability properties of novel fluorinated copolymers poly(perfluoroalkyl acrylate-co-stearyl acrylate) containing short perfluorohexyl chains10.1021/la504467m ↗
8. Novel fluorinated polymers containing short perfluorobutyl side chains and their super wetting performance on diverse substrates10.1021/acsami.6b01102 ↗
9. Fluorinated modification of hyperbranched polyesters used for improving the surface property of UV curing coatings10.1016/j.jfluchem.2010.09.008 ↗
10. Syntheses and properties of fluorinated phosphate acrylates used for UV-curing coatings10.1016/j.porgcoat.2008.09.019 ↗
11. Fluorinated comblike homopolymers: the effect of spacer lengths on surface properties10.1002/pola.20851 ↗
12. Improvement of surface and moisture resistance of epoxy resins with fluorinated glycidyl ether10.1002/app.30803 ↗
13. Nanostructured thermosets from epoxy and poly(2,2,2-trifluoroethyl acrylate)- block -poly(glycidyl methacrylate) diblock copolymer: demixing of reactive blocks and thermomechanical properties10.1016/j.polymer.2011.09.055 ↗
14. Preparation and surface properties of fluorine-containing diblock copolymers10.1016/S0032-3861(02)00202-1 ↗
15. A novel block copolymer with excellent amphiphobicity synthesized via ARGET ATRP10.1002/pola.28070 ↗
16. Synthesis and characterization of fluorinated diblock copolymer of 2,2,2-trifluoroethyl methacrylate and methyl methacrylate based on RAFT polymerzation10.1016/j.jfluchem.2014.06.029 ↗
17. Structure and properties of a semifluorinated diblock copolymer modified epoxy blend
18. Enhancing the hydrophobic properties of various commercial polymers through mixtures and coatings with a fluorinated diblock copolymer in low concentrations10.1016/j.eurpolymj.2013.04.012 ↗
19. Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP10.1016/j.jfluchem.2010.10.004 ↗
20. Surface properties and structures of diblock and random copolymers with perfluoroalkyl side chains10.1016/j.jcis.2004.06.082 ↗
21. Synthesis and characterization of novel acrylic comb-shaped copolymer containing long fluorinated side chains10.1007/s10965-015-0877-1 ↗
22. Preparation and properties of UV-curable waterborne comb-like (meth)acrylate copolymers with long fluorinated side chains10.1016/j.porgcoat.2016.01.027 ↗
23. Waterborne UV-curable comb-shaped (meth)acrylate graft copolymer containing long fluorinated and/or polysiloxane side chains10.1039/C6RA02433E ↗
24. Synthesis of fluorine-containing graft copolymers of poly(perfluoroalkylethyl methacrylate)- g -poly(methyl methacrylate) by the macromonomer technique and emulsion copolymerization method10.1016/S0032-3861(96)00792-6 ↗
25. Synthesis of acrylic macromonomers by free-radical-initiated polymerization. Conversion to comblike copolymers10.1021/ma00009a002 ↗
26. Graft copolymers having hydrophobic backbone and hydrophilic branches. III. Synthesis of graft copolymers having oligovinylpyrrolidone as hydrophilic branch10.1002/pola.1988.080260607 ↗
27. Synthesis and polymerization of a styryl terminated oligovinylpyrrolidone macromonomer10.1002/apmc.1985.051320107 ↗
28. Synthesis of graft copolymers having hydrophobic backbone and hydrophilic branches by phase transfer catalysis10.1002/apmc.1984.051220115 ↗
29. Surface properties of the fluorine-containing graft copolymer of poly((perfluoroalkyl)ethyl methacrylate)-g-poly(methyl methacrylate)10.1021/ma970262u ↗
30. Synthesis and characterization of acrylic latex: effects of fluorine and silicon components on properties of the latex copolymers10.1016/j.jfluchem.2013.08.014 ↗
31. Morphology and mechanical properties of nanostructured acrylic tri-block-copolymer modified epoxy10.1002/pen.23648 ↗