journal article·2018-12

The role of g-C3N4 as nanofiller in improvement of mechanical, thermal, and X-band wave absorption properties of epoxy vinyl ester coating

Abdolreza Tarighati Sareshkeh, Mir Saeed Seyed Dorraji, Mohammad Hossein Rasoulifard

Publisher page

Abstract

Abstract The present work has been focused on the development of nanocomposites based on epoxy vinyl ester (EVE) matrix and some kinds of polymeric graphitic carbon nitride (g-C3N4) as a reinforcing agent. At first, the obtained solids were characterized by X-ray diffraction analyzer (XRD) and scanning electron microscope (SEM). Then, water absorption properties and mechanical properties for nanocomposites consist of g-C3N4 nanosheets were investigated. The results showed that the most appropriate amount of nanofiller (NF) (i.e., g-C3N4 nanosheets (CN-500)) is 0.5%wt. Then, the comparison between neat EVE and nanocomposites consist of CN-500 (0.5%wt) was studied by Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analysis (TGA), and the results showed that the thermal properties had been improved. The effects of embedment (dope process) with atoms like sulfur, chlorine, phosphorus, Fe3+ ion and couple with Fe3O4 was investigated by the vector network analyzer. Data analysis indicated that among the prepared nanocomposites with 0.5%wt of NFs, the phosphorus-doped g-C3N4 (P CN) sample (with 2 mm thickness) reflection loss (RL) spectrum is less than -10 dB (absorption >90%) at the frequency range of 8–12 GHz (X-band). Also, the area under the RL curve for the best nanocomposite sample was calculated 67.42 GHz.dB, and it was suggested that P CN could be a good candidate for microwave (MW) absorption purposes. Also, this sample has shown interesting results in the tensile strength test which makes it an appropriate choice for using it as rigid coating with MW absorption ability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Conducting polymers and applications · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Studies on thermal and viscoelastic properties of vinyl ester resin and its composites with glass fiber10.1590/S1517-707620150001.0009 ↗
2. Synthesis and characterization of vinyl ester/inorganic layered material nanocomposites10.1039/C6RA21780J ↗
3. Graphene oxide/vinyl ester resin nanocomposite: the effect of graphene oxide, curing kinetics, modeling, mechanical properties and thermal stability10.1039/C5RA23731A ↗
4. Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: Magnetic field assisted alignment and cryogenic temperature mechanical properties10.1016/j.jcis.2018.01.087 ↗
5. Excellent corrosion protection performance of epoxy composite coatings filled with silane functionalized silicon nitride10.1007/s10965-018-1518-2 ↗
6. Overview of polymer nanocomposites: Computer simulation understanding of physical properties10.1016/j.polymer.2017.10.035 ↗
7. Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites10.1016/j.polymer.2017.10.049 ↗
8. Electrically insulated epoxy nanocomposites reinforced with synergistic core–shell SiO2@ MWCNTs and montmorillonite bifillers10.1002/macp.201700357 ↗
9. Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites10.1016/j.compscitech.2017.11.002 ↗
10. Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes10.1039/C6TC05261D ↗
11. Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing10.1039/C7TC04959E ↗
12. Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing10.1039/C6TC03713E ↗
13. Carbon nanotubes-adsorbed electrospun PA66 nanofiber bundles with improved conductivity and robust flexibility, ACS appl10.1021/acsami.6b02888 ↗
14. Organic vapor sensing behaviors of conductive thermoplastic polyurethane–graphene nanocomposites10.1039/C6TC00987E ↗
15. Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications10.1039/C5TC02751A ↗
16. Non-covalently functionalized graphene strengthened poly (vinyl alcohol)10.1016/j.matdes.2017.11.023 ↗
17. Mechanical and thermal properties of josapine pineapple leaf fiber (PALF) and PALF-reinforced vinyl ester composites10.1007/s12221-014-1035-9 ↗
18. Influence of morphology on the mechanical properties of polymer nanocomposites filled with uniform or patchy nanoparticles10.1021/acs.langmuir.6b01049 ↗
19. Influence of g-C3N4 nanosheets on thermal stability and mechanical properties of biopolymer electrolyte nanocomposite films: a novel investigation10.1021/am4044932 ↗
20. Light triggered interfacial damage self-healing of poly (p-phenylene benzobisoxazole) fiber composites10.1088/1361-6528/aab010 ↗
21. Micromechanical analysis of molecular orientation in high-temperature creep of polycarbonate10.1016/j.matdes.2018.02.025 ↗
22. Enhanced electromagnetic wave absorption properties of polyaniline-coated Fe3O4/reduced graphene oxide nanocomposites10.1007/s10854-014-2073-1 ↗
23. Thermal, mechanical and magnetic properties of functionalized magnetite/vinyl ester nanocomposites10.1039/C6RA17190G ↗
24. M.H. A.R. Amani-Ghadim, Enhanced microwave absorption property of Fe3O4/CaCu3− xMgxTi4− ySnyO12 (0≤ x, y≤ 1)/graphene oxide nanocomposites in epoxy vinyl ester resin10.1007/s10854-017-7076-2 ↗
25. Ultrasonic pretreated sludge derived stable magnetic active carbon for Cr (VI) removal from wastewater10.1021/acssuschemeng.7b04421 ↗
26. Synthesis of Fe3O4/polypyrrole/polyaniline nanocomposites by in-situ method and their electromagnetic absorbing properties10.1016/j.jscs.2016.11.005 ↗
27. Preparation, characterization and electromagnetic shielding effectiveness of conductive polythiophene/poly (ethylene terephthalate) composite fibers10.1080/10601325.2012.676896 ↗
28. Chitosan-coated-magnetite with covalently grafted polystyrene based carbon nanocomposites for hexavalent chromium adsorption10.30919/es.180308 ↗
29. Significantly enhanced energy density of magnetite/polypyrrole nanocomposite capacitors at high rates by low magnetic fields10.1007/s42114-017-0003-4 ↗
30. Structural, optical and photocatalytic properties of visible light driven zinc oxide hybridized two-dimensional π-conjugated polymeric g-C3N4 composite10.1016/j.optmat.2017.10.051 ↗
31. A 2D-g-C3N4 nanosheet as an eco-friendly adsorbent for various environmental pollutants in water10.1016/j.chemosphere.2016.12.073 ↗
32. Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity10.1016/j.polymer.2017.07.083 ↗
33. Porous lignin based poly (acrylic acid)/organo-montmorillonite nanocomposites: swelling behaviors and rapid removal of Pb (II) ions10.1016/j.polymer.2017.09.009 ↗
34. In situ polymerized poly (acrylic acid)/alumina nanocomposites for Pb2+ adsorption10.1002/adv.21969 ↗
35. Polydimethylsiloxane-titania nanocomposite coating: fabrication and corrosion resistance10.1016/j.polymer.2018.01.063 ↗
36. Hydroxide ions transportation in polynorbornene anion exchange membrane10.1016/j.polymer.2018.01.079 ↗
37. PAA/alumina composites prepared with different molecular weight polymers and utilized as support for nickel‐based catalyst10.1002/adv.21908 ↗
38. Durably antibacterial and bacterially antiadhesive cotton fabrics coated by cationic fluorinated polymers10.1021/acsami.7b16235 ↗
39. An overview of metamaterials and their achievements in wireless power transfer10.1039/C7TC03384B ↗
40. Controllable cross‐linking anion exchange membranes with excellent mechanical and thermal properties10.1002/mame.201700462 ↗
41. M.S. Seyed Dorraji, M.H. Rasoulifard, A.R. Amani-Ghadim, I. Hajimiri, A.R. Tarighati Sareshkeh, Enhanced microwave absorption property of MnFe9n+3O15n+ 4(0≤ n≤1) (M=Ba,Sr) / CaCu3Ti4O12 / phosphorus-doped g-C3N4 nanocomposite: Preparation and optimization10.1016/j.jallcom.2017.12.017 ↗
42. Photocatalytic activity of g-C3N4: An empirical kinetic model, optimization by neuro-genetic approach and identification of intermediates10.1016/j.cherd.2017.09.012 ↗
43. Enhanced visible light photocatalytic activity and oxidation ability of porous graphene-like g-C3N4 nanosheets via thermal exfoliation10.1016/j.apsusc.2015.04.034 ↗
44. Synthesis and characterization of sulfur self-doped g-C3N4 with efficient visible-light photocatalytic activity10.1016/j.matlet.2015.02.119 ↗
45. A simple and efficient method to prepare a phosphorus modified g-C3N4 visible light photocatalyst10.1039/C4RA02284J ↗
46. g-C3N4-triggered super synergy between photocatalysis and ozonation attributed to promoted OH* generation10.1016/j.catcom.2015.03.004 ↗
47. Fe-doped and-mediated graphitic carbon nitride nanosheets for enhanced photocatalytic performance under natural sunlight10.1039/c3ta15358d ↗
48. Nucleation and growth of magnetite from solution10.1038/nmat3558 ↗
49. Magnetically Separated meso-g-C3N4/Fe3O4: bifuctional composites for removal of arsenite by simultaneous visible-light catalysis and adsorption10.1021/acs.iecr.6b02178 ↗
50. Synthesis of vinylester-clay nanocomposites: Influence of the nature of clay on mechanical, thermal and barrier properties
51. Synthesis of magnetically separable and recyclable g-C3N4–Fe3O4 hybrid nanocomposites with enhanced photocatalytic performance under visible-light irradiation10.1021/jp409651g ↗
52. In vitro removal of toxic heavy metals by poly (γ-glutamic acid)-coated superparamagnetic nanoparticles
53. Mechanical properties of doped g-C3N4–A first-principle study10.1016/j.vacuum.2014.02.015 ↗
54. Mesoporous phosphorus-doped g-C3N4 nanostructured flowers with superior photocatalytic hydrogen evolution performance10.1021/acsami.5b04947 ↗
55. Preparation and characterization of wood–plastic composite reinforced by graphitic carbon nitride10.1016/j.matdes.2014.10.041 ↗
56. Trace-level phosphorus and sodium co-doping of g-C3N4 for enhanced photocatalytic H2 production10.1016/j.jpowsour.2017.03.089 ↗
57. The properties and photocatalytic performance comparison of Fe3+-doped g-C3N4 and Fe2O3/g-C3N4 composite catalysts10.1039/c4ra03290j ↗
58. A Facile One‐Step Synthesis of Fe‐Doped g-C3N4Nanosheets and Their Improved Visible‐Light Photocatalytic performance10.1002/cctc.201700492 ↗
59. Thermal stability and rheological behaviors of high-density polyethylene/fullerene nanocomposites10.1155/2012/340962 ↗
60. One step synthesis of oxygen doped porous graphitic carbon nitride with remarkable improvement of photo-oxidation activity: Role of oxygen on visible light photocatalytic activity10.1016/j.apcatb.2017.01.058 ↗
61. Electric and structural properties of polymeric graphite carbon nitride (g-C3N4): a Density Functional Theory study10.1016/j.comptc.2016.11.004 ↗
62. First-principles investigation of graphitic carbon nitride monolayer with embedded Fe atom10.1016/j.susc.2017.10.006 ↗
63. Poly (lactic acid)/graphene oxide–ZnO nanocomposite films with good mechanical, dynamic mechanical, anti‐UV and antibacterial properties10.1002/jctb.4476 ↗
64. Fabrication and Mechanical Properties of Graphene Oxide-Al2O3 Oxide Hybrid Material10.1166/sam.2014.1966 ↗