journal article·2020-01

Incorporation of ligno-cellulose nanofibrils and bark extractives in water-based coatings for improved wood protection

Yanhui Huang, Qiming Feng, Cuiyin Ye, Sandeep S. Nair, Ning Yan

Publisher page

Abstract

Abstract CNFs (cellulose nanofibrils) and BEs (bark extractives) are low-cost, sustainable, and biodegradable materials, which had potential to be used in numerous applications, including biomass composites, food packaging, and polymer materials. In this study, CNFs with high lignin content (LCNFs) and BEs were prepared from western red cedar and lodgepole pine bark, respectively. These were then homogeneously dispersed in water-based acrylic coatings to paint on the surfaces of spruce and sugar maple wood samples. The results showed that the distribution of LCNFs and BEs in the coatings was homogeneous and uniform. The LCNFs had a significant effect on improving the hardness (2–3 levels higher than neat coating) and abrasive resistance (40% higher wear-out rotations), and a content of 2% was sufficient to realize these optimum coating properties. Moreover, the incorporation of LCNFs and BEs increased the aging resistance of the water-based acrylic paints due to an effective inhibitory effect on crack formation and extension conferred by the LCNFs and the free radical scavenger activity provided by the BEs during the aging process. The optimum content of 2% for LCNFs (2% in primer and 2% in top coating) and BEs (in top coating) substantially increased the effectiveness of water-based acrylic coatings in regard to wood protection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Weathering performance of spruce coated with water based acrylic paint modified with TiO 2 and clay nanoparticles10.1016/j.porgcoat.2013.06.008 ↗
2. Effects of geographical directions and climatological parameters on natural weathering of fir wood10.1016/j.conbuildmat.2015.07.049 ↗
3. Use of nanofillers in wood coatings: a scientific review10.1007/s11998-015-9659-2 ↗
4. Preparation and properties of environmental-friendly coatings based on carboxymethyl cellulose nitrate ester & modified alkyd10.1016/j.carbpol.2015.10.067 ↗
5. Study on the preparation and properties of self-emulsified nitrocellulose emulsion for coatings
6. Nanofibrillated cellulose in wood coatings: dispersion and stabilization of ZnO as UV absorber10.1016/j.porgcoat.2015.05.025 ↗
7. Natural organic UV-absorbent coatings based on cellulose and lignin: designed effects on spectroscopic properties10.1021/bm301373b ↗
8. Mechanical properties of UV-waterborne varnishes reinforced by cellulose nanocrystals10.1007/s11998-014-9598-3 ↗
9. Preparation and characterization of cellulose nanofibers from corn stalk
10. Cellulose nanopaper structures of high toughness10.1021/bm800038n ↗
11. Crosslinked nanofibrillated cellulose: poly(acrylic acid) nanocomposite films; enhanced mechanical performance in aqueous environments10.1007/s10570-013-0061-x ↗
12. Homogeneous dispersion of cellulose nanofibers in waterborne acrylic coatings with improved properties and unreduced transparency10.1021/acssuschemeng.6b00415 ↗
13. Investigating the effect of lignin on the mechanical, thermal, and barrier properties of cellulose nanofibril reinforced epoxy composite10.1016/j.indcrop.2017.02.032 ↗
14. Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review10.1007/s10570-015-0551-0 ↗
15. Bark derived submicron-sized and nano-sized cellulose fibers: from industrial waste to high performance materials10.1016/j.carbpol.2015.07.080 ↗
16. Isolation of lignocellulose nanofibrils (LCNF) and application as adhesive replacement in wood composites: example of fiberboard10.1007/s10570-017-1320-z ↗
17. Preparation and property assessment of neat ligno cellulose nanofibrils (LCNF) and their composite films10.1007/s10570-017-1266-1 ↗
18. Synthesis and characterization of an extractive-based bio-epoxy resin from beetle infested Pinus contorta bark10.1039/C4GC00459K ↗
19. Optimization of acid pretreatment in order to increase the phenolic content of Picea abies bark by surface response methodology10.15376/biores.8.1.1258-1273 ↗
20. Comparison of the protection effectiveness of acrylic polyurethane coatings containing bark extracts on three heat-treated North American wood species: surface degradation10.1016/j.apsusc.2012.02.017 ↗
21. Properties of cellulose micro/nanofibers obtained from eucalyptus pulp fiber treated with anaerobic digestate and high shear mixing10.1007/s10570-016-0890-5 ↗
22. Morphological and thermo-chemical changes upon autohydrolysis and microemulsion treatments of coir and empty fruit bunch (EFB) residual biomass to isolate lignin-rich micro and nano fibrillar cellulose (MNFC)10.1021/acssuschemeng.6b02838 ↗
23. Production and modification of nanofibrillated cellulose using various mechanical processes: a review10.1016/j.carbpol.2013.08.069 ↗
24. Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength10.1039/C4RA15445B ↗
25. Effect of high residual lignin on the thermal stability of nanofibrils and its enhanced mechanical performance in aqueous environments10.1007/s10570-015-0737-5 ↗
26. Effects of reaction parameters on the glycidyl etherification of bark extractives during bioepoxy resin synthesis10.1021/acssuschemeng.5b01098 ↗
27. Analysis of titanium dioxide and zinc oxide nanoparticles in cosmetics10.1016/j.jfda.2015.02.009 ↗
28. Lignification and lignin topochemistry - an ultrastructural view10.1016/S0031-9422(01)00049-8 ↗
29. Effects of lignin content on mechanical and thermal properties of polypropylene composites reinforced with micro particles of spray dried cellulose nanofibrils10.1021/acssuschemeng.8b02544 ↗
30. UV curable acrylate nanocomposites: properties and applications10.1007/s10965-005-4339-z ↗
31. Mechanical properties of UV-waterborne varnishes reinforced by cellulose nanocrystals10.1007/s11998-014-9598-3 ↗
32. In-situ and ex-situ catalytic upgrading of vapors from microwave-assisted pyrolysis of lignin10.1016/j.biortech.2017.09.200 ↗
33. Targeting adequate thermal stability and fire safety in selecting ionic liquid-based electrolytes for energy storage10.1039/C3CP54225D ↗
34. Effect of some environmentally degradable materials on the pyrolysis of plastics II: influence of cellulose and lignin on the pyrolysis of complex mixtures10.1007/s10163-009-0282-0 ↗
35. Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties10.1016/j.carbpol.2011.11.041 ↗
36. Understanding of alkaline pretreatment parameters for cornstover enzymatic saccharification
37. The use of waterborne paints in contemporary murals: comparing the stability of vinyl, acrylic and styrene-acrylic formulations to outdoor weathering conditions10.1016/j.polymdegradstab.2013.12.034 ↗
38. Study of the stability of a series of synthetic colorants applied with styrene-acrylic copolymer, widely used in contemporary paintings, concerning the effects of accelerated aging10.1016/j.culher.2010.02.003 ↗
39. UV aging studies: evaluation of lightfastness declarations of commercial acrylic paints10.1007/s00216-011-5369-5 ↗