Steel surface treatment with three different acid solutions and its effect on the protective properties of the subsequent silane coating
Source abstract
Abstract
Abstract Surface treatment of steel before application of silane coating plays important role to provide better corrosion protection. This work aims to evaluate the effect of steel surface treatment with acid solutions on the protective properties of subsequent organosilane coating. For this purpose, sulfuric, phosphoric and hydrochloric acid solutions were prepared at pH 3. The change in surface chemistry and morphology of mild steel surface after acid treatment was assessed by FE-SEM, XPS and water contact angle measurements. After surface treatment with acid solutions, a silane coating was applied on the steel samples. EIS measurements on the silane coated samples showed that the one treated by sulfuric acid solution provided better protection compared to the rest of samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Corrosion protection mechanisms of carbon steel by an epoxy resin containing indole-3 butyric acid modified clay10.1016/j.porgcoat.2010.08.004 ↗
2. Corrosion protection of metals by water-based silane mixtures of bis-[trimethoxysilylpropyl]amine and vinyltriacetoxysilane10.1016/j.porgcoat.2003.08.009 ↗
3. Bonding and corrosion protection mechanisms of gamma-APS and BTSE silane films on aluminum substrates10.1163/156856103772150788 ↗
4. Silanes and rare earth salts as chromate replacers for pre-treatments on galvanised steel10.1016/j.electacta.2004.01.051 ↗
5. Evaluation of the effect of vinyltrimethoxysilane on corrosion resistance and adhesion strength of epoxy coated AA105010.1016/j.electacta.2007.04.043 ↗
6. Organic inorganic hybrid coatings for corrosion protection10.1016/S0022-3093(01)00818-3 ↗
7. Studying various mixtures of 3-aminopropyltriethoxysilane (APS) and tetraethylorthosilicate (TEOS) silanes on the corrosion resistance of mild steel and adhesion properties of epoxy coating10.1016/j.ijadhadh.2015.09.007 ↗
8. Kinetics of hydrolysis and self condensation reactions of silanes by NMR spectroscopy10.1016/j.colsurfa.2007.06.028 ↗
9. Hydrolysis-condensation kinetics of different silane coupling agents10.1080/10426507.2010.494644 ↗
10. Leach · 1999
11. Sol-gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloys10.1007/s10971-012-2838-z ↗
12. Determination of optimum concentration of cloisite in an eco-friendly silane sol-gel film to improve corrosion resistance of mild steel10.1016/j.clay.2014.04.018 ↗
13. Corrosion protection properties of organofunctional silanes-An overview10.1016/S1007-0214(05)70134-6 ↗
14. Effect of metallic cleaning and oxidizing pretreatment on corrosion behaviour of sol-gel hybrid coated EN AW-6063 alloy
15. Evaluation of the anti-corrosive effect of acid pickling and sol-gel coating on magnesium AZ31 alloy10.1016/j.corsci.2007.02.006 ↗
16. Pre-treatments applied to oxidized aluminum surfaces to modify the interfacial bonding with bis-1,2-(triethoxysilyl)ethane (BTSE) Part II. Anodized 7075-T6 Al alloy10.1016/j.apsusc.2005.02.129 ↗
17. Effect of phosphate-silane pretreatment on the corrosion resistance and adhesive-bonded performance of the AZ31 magnesium alloys10.1016/j.porgcoat.2013.01.010 ↗
18. Corrosion protection of steel with zinc phosphate conversion coating and post-treatment by hybrid organic-inorganic sol-gel based silane film10.1149/2.0491706jes ↗
19. A sulfuric acid surface treatment of mild steel for enhancing the protective properties of an organosilane coating10.1016/j.porgcoat.2016.10.033 ↗
20. Reaction rate studies for the corrosion of metals in acids-I, iron in mineral acids10.5006/1.3579270 ↗
21. Origin of the improved mobility and photo-bias stability in a double-channel metal oxide transistor10.1038/srep03765 ↗
22. Deshpande · 2016
23. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗