journal article·2017-08

Self-anticorrosion performance efficiency of renewable dimer-acid-based polyol microcapsules containing corrosion inhibitors with two triazole groups

Eunjoo Koh, Sooyeoul Park

Publisher page

Abstract

Abstract Renewable polyurethane microcapsules based on a dimer-acid-based polyol were prepared through interfacial polymerization with a homogenizer and sonicator. The dimer-acid-based polyol was used to produce a dimer ester-toluene diisocyanate prepolymer by reacting with toluene 2,4-diisocyanate (TDI). Then, the dimer ester-toluene diisocyanate prepolymer was reacted with 1,4-butanediol (BD) in order to form the shell of the microcapsules, which contained triazole- and oleate-derivative corrosion inhibitors as core materials for anticorrosion effects in coating systems. The resultant microcapsules using a homogenizer (DTM) and a sonicator (DSM) consisted of the anticorrosion agent core and renewable polyurethane shell, and were prepared under controlled optimum conditions (2000–8000 rpm, 500 W). Specific core contents were approximately 47–58%, and the ratios of the shell thicknesses to the capsule diameters were approximately 0.08. The anticorrosion properties of the self-healing coatings based on smart microcapsules were investigated on scratched panels using the salt spray test. The scratch test revealed that the self-healing coating system had significant ability to prevent corrosion growth. Anticorrosion coating surfaces with functionalized smart microcapsules did not corrode so notably that the corrosion-resistance effect, as the rusting degree, was attenuated by the salt spray, and the rusting degree of the self-healing microcapsules increased to 0.045% of the panel area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Characterisation of defects observed within the positive grid corrosion layer of the valve regulated lead/acid battery10.1016/S0378-7753(01)00856-4 ↗
2. Salinity in marine atmospheric corrosion: its dependence on the wind regime existing in the site10.1016/S0010-938X(99)00048-7 ↗
3. Preparation and characterization of poly (urea-formaldehyde) microcapsules filled with epoxy resins10.1016/j.polymer.2006.05.051 ↗
4. Renewable polyurethane microcapsules with isosorbide derivatives for self-healing anticorrosion coatings10.1021/ie402505s ↗
5. On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings10.1016/j.elecom.2007.08.012 ↗
6. A theoretical study of some hydroxamic acids as corrosion inhibitors for carbon steel10.1016/j.corsci.2010.06.005 ↗
7. Theoretical study of benzimidazole and its derivatives and their potential activity as corrosion inhibitors10.1016/j.corsci.2009.10.017 ↗
8. Influence of process parameters on the corrosion properties of electrolytic conversion plasma coated magnesium alloys10.1016/j.surfcoat.2005.02.035 ↗
9. Anticorrosion coatings with self-healing effect based on nanocontainers impregnated with corrosion inhibitor10.1021/cm062066k ↗
10. Use of electrochemical noise method to investigate the anti-corrosive properties of a set of compliant coatings10.1016/j.porgcoat.2004.08.009 ↗
11. Layer-by-layer assembled nanocontainers for self-healing corrosion protection10.1002/adma.200502053 ↗
12. Corrosion protection of Nd-Fe-B magnets by silanization10.1016/j.porgcoat.2006.01.001 ↗
13. Cerium treatments for temporary protection of electroplated steel10.1016/j.surfcoat.2004.11.032 ↗
14. Anticorrosion efficiency of organic coatings depending on the pigment volume concentration of polyaniline phosphate10.1016/j.porgcoat.2008.06.005 ↗
15. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite-Part II: In situ self-healing10.1016/j.compscitech.2005.04.053 ↗
16. Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings10.1016/j.porgcoat.2008.04.008 ↗
17. Polyurethane microcapsules for self-healing paint coatings10.1039/C4RA00213J ↗
18. Extended control of marine fouling10.1007/BF02798398 ↗
19. Microencapsulation technology for thiourea corrosion inhibitor10.1007/s10008-009-0803-8 ↗
20. Microencapsulation of water-soluble herbicide by interfacial reaction. I. Characterization of microencapsulation10.1002/1097-4628(20001128)78:9<1645::AID-APP100>3.0.CO;2-2 ↗
21. Tuning of microcapsule adhesion by varying the capsule-wall thickness10.1103/PhysRevE.69.031802 ↗
22. Preparation of alginate complex capsules containing eucalyptus essential oil and its controlled release10.1016/j.colsurfb.2003.07.002 ↗
23. Self-healing polymeric materials using epoxy/mercaptan as the healant10.1021/ma800028d ↗
24. Polyurethane microcapsule with glycerol as the polyol component for encapsulated self healing agent
25. Novel, one-step, chromate-free coatings containing anticorrosion pigments for metals-An overview and mechanistic study10.1016/j.porgcoat.2006.08.030 ↗
26. Microencapsulation of the triazole derivative for self-healing anticorrosion coatings10.1039/C4NJ00827H ↗
27. Synthesis and rust preventing properties of dodecyl succinate derivatives containing triazole groups10.1021/ie300316f ↗
28. Functional thermoplastics from linear diols and diisocyanates produced entirely from renewable lipid sources10.1021/bm901308c ↗
29. An alternative approach for the incorporation of cellulose nanocrystals in flexible polyurethane foams based on renewably sourced polyols10.1016/j.indcrop.2016.11.011 ↗
30. Condensation polymers from natural oils10.1016/j.progpolymsci.2008.07.004 ↗
31. Fats and oils as oleochemical raw materials10.1351/pac200072071255 ↗
32. Structure and properties of triolein-based polyurethane networks10.1021/bm020046f ↗
33. Microencapsulation of pesticides by interfacial polymerization utilizing isocyanate or aminoplast chemistry10.1002/(SICI)1096-9063(199812)54:4<394::AID-PS829>3.0.CO;2-S ↗
34. Synthesis and release studies of oil-containing poly (vinyl alcohol) microcapsules prepared by coacervation10.1016/0168-3659(95)00099-2 ↗
35. Microencapsulation of octadecane as a phase-change material by interfacial polymerization in an emulsion system10.1007/s00396-001-0603-x ↗
36. Microencapsulation of phosphate: application to flame retarded coated cotton10.1016/S0141-3910(02)00063-0 ↗
37. Synthesis of succinic acid alkyl half-ester derivatives with improved lubricity characteristics10.1021/ie202137r ↗
38. Microencapsulation of ammonium phosphate with a polyurethane shell. Part II. Interfacial polymerization technique10.1016/j.reactfunctpolym.2006.02.001 ↗
39. Effects of ammonium chloride and heat treatment on residual formaldehyde contents of melamine-formaldehyde microcapsules10.1007/s00396-007-1744-3 ↗
40. ASTM C 1624-05
41. ASTM B 117-73
42. ASTM D 610-08