journal article·2019-10

Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties

A.F. Jaramillo, L.F. Montoya, J. Manoj Prabhakar, J.P. Sanhueza, K. Fernández, M. Rohwerder, D. Rojas, C. Montalba, M.F. Melendrez

Publisher page

Abstract

Abstract With the purpose of improving the protection of steel ASTM A36 from corrosion, in this paper the use of tannin as an inhibitor was studied by incorporating it in an epoxy resin along with zinc oxide nanoparticles functionalized with 3-aminopropyltriethoxysilane (APTES) in concentrations of 1, 3, and 5%w/w. Electrochemical techniques such as polarization curves and EIS for the characterization of the anticorrosive properties, SKP for the study of coating delamination with the substrate, contact angle measurement and other standardized methods were used for the evaluation of the properties of the film. The results of the polarization curves revealed that the corrosion current density of the steel (icorr) decreases markedly with the addition of the tannin extract by changing the cathodic behavior without affecting the active anodic behavior. Likewise, the EIS analysis showed that the coatings with surface modified nanoparticles provide an excellent protection against corrosion that is complemented by the protective layer of the tannin-iron complex formed and the same was confirmed by FTIR spectroscopy after exposing the plates to accelerated corrosion tests in salt spray and weathering chamber. Finally, it could be demonstrated that the incorporation of zinc oxide nanoparticles in the coating formulation subtly improves the film properties and likewise, partially increases the hydrophobicity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Corrosion and surface modification on biocompatible metals: a review10.1016/j.msec.2017.04.102 ↗
2. White · 2012
3. Does “coating resistance” control corrosion?10.1016/j.porgcoat.2016.04.015 ↗
4. Natural products as corrosion inhibitor for metals in corrosive media - A review10.1016/j.matlet.2007.04.079 ↗
5. Recent advances on organic coating system technologies for corrosion protection of offshore metallic structures10.1016/j.molliq.2018.08.053 ↗
6. Recent development of vegetal tannins in corrosion protection of Iron and steel10.2174/1874465610801030223 ↗
7. Reviews on corrosion inhibitors: a short view10.1080/00986445.2016.1172485 ↗
8. Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel10.1016/j.corsci.2008.08.004 ↗
9. Hydroxypropyl tannin derivatives from Pinus pinaster (Ait.) bark10.1016/j.indcrop.2013.06.019 ↗
10. Zinc tannate and magnesium tannate as anticorrosion pigments in epoxy paint formulations10.1016/j.porgcoat.2018.04.007 ↗
11. Inhibitive action of mangrove tannins and phosphoric acid on pre-rusted steel via electrochemical methods10.1016/j.corsci.2008.02.013 ↗
12. Black wattle tannin As steel corrosion inhibitor10.5402/2012/937920 ↗
13. A review of the antioxidant mechanisms of polyphenol compounds related to Iron binding10.1007/s12013-009-9043-x ↗
14. Comparison of steel anticorrosive protection formulated with natural tannins extracted from acacia and from pine bark10.1016/S0010-938X(99)00137-7 ↗
15. Use of tannin anticorrosive reaction primer to improve traditional coating systems10.5006/1.3294333 ↗
16. “Smart” corrosion inhibiting coatings10.1016/S0300-9440(03)00137-1 ↗
17. Corrosion inhibition using superhydrophobic films10.1016/j.corsci.2007.10.005 ↗
18. Corrosion behavior of superhydrophobic surfaces: a review10.1016/j.arabjc.2014.03.006 ↗
19. A novel method to prepare superhydrophobic, UV resistance and anti-corrosion steel surface10.1016/j.cej.2012.08.090 ↗
20. Fabrication of superhydrophobic surfaces on zinc substrates and their application as effective corrosion barriers10.1016/j.apsusc.2011.09.064 ↗
21. Anticorrosive coatings: a review10.1007/s11998-008-9144-2 ↗
22. The use of nanoclay in preparation of epoxy anticorrosive coatings10.1016/j.porgcoat.2013.11.017 ↗
23. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating10.1016/j.surfcoat.2009.06.048 ↗
24. Smart coating for corrosion protection by adopting nano particles10.1016/j.porgcoat.2012.01.011 ↗
25. Novel organic-inorganic hybrid coatings prepared by the sol-gel process: corrosion and mechanical properties10.1002/pi.4187 ↗
26. Epoxy/polyaniline-ZnO nanorods hybrid nanocomposite coatings: synthesis, characterization and corrosion protection performance of conducting paints10.1016/j.porgcoat.2013.08.015 ↗
27. Estimation of the surface interaction mechanism of ZnO nanoparticles modified with organosilane groups by Raman Spectroscopy10.1016/j.ceramint.2017.06.027 ↗
28. Comparison of the composition of Pinus radiata bark extracts obtained at bench- and pilot-scales10.1016/j.indcrop.2012.01.001 ↗
29. Study of anticorrosive coatings based on high and low molecular weight polyphenols extracted from the Pine radiata bark10.1016/j.porgcoat.2018.11.010 ↗
30. Development and evaluation of a green corrosion inhibitor based on rice bran oil obtained from agro-industrial waste10.1016/j.indcrop.2018.04.009 ↗
31. Laurus nobilis L. Oil as green corrosion inhibitor for aluminium and AA5754 aluminium alloy in 3% NaCl solution10.1016/j.matchemphys.2012.09.066 ↗
32. Corrosion of rusted steel in aqueous solutions of tannic acid10.5006/1.3315906 ↗
33. Corrosion inhibitory action of some plant extracts on the corrosion of mild steel in acidic media10.1016/j.arabjc.2012.01.015 ↗
34. Use of nanoindentation and nanoscratch experiments to reveal the mechanical behavior of sol–gel prepared nanocomposite films on polycarbonate10.1016/j.triboint.2012.08.004 ↗
35. Anticorrosion properties of polyaniline-coated pigments in organic coatings10.1016/j.corsci.2008.08.044 ↗
36. Corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by a sol-gel based silane coating filled with amino and isocyanate silane functionalized graphene oxide nanosheets10.1016/j.apsusc.2017.12.240 ↗
37. Effect of the surface modification of zinc powders with organosilanes on the corrosion resistance of a zinc pigmented organic coating10.1016/j.porgcoat.2014.06.008 ↗
38. Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel10.1016/j.corsci.2016.11.008 ↗
39. Anticorrosion behavior of superhydrophobic composite coating on carbon steel in seawater10.5006/1129 ↗
40. Evaluating protection performance of zinc rich epoxy paints modified with polyaniline and polyaniline-clay nanocomposite10.1016/j.porgcoat.2014.04.009 ↗
41. Anti-corrosion hybrid coatings based on epoxy-silica nano-composites: toward relationship between the morphology and EIS data10.1016/j.porgcoat.2014.04.005 ↗
42. Excellent corrosion protection performance of epoxy composite coatings filled with amino-silane functionalized graphene oxide10.1016/j.surfcoat.2017.03.050 ↗
43. Evaluation of tannin from Rhizophora apiculata as natural antifouling agents in epoxy paint for marine application10.1016/j.porgcoat.2014.12.012 ↗
44. Influence of natural inhibitor, pigment and extender on corrosion of polymer coated steel10.1016/j.porgcoat.2010.08.003 ↗
45. Complexation of condensed tannins with metal ions
46. Possible improvement of catechin as corrosion inhibitor in acidic medium10.1016/j.corsci.2012.08.012 ↗
47. Biopolymers nanocomposite for material protection: enhancement of corrosion protection using waterborne polyurethane nanocomposite coatings10.1016/j.porgcoat.2016.05.012 ↗
48. A cathodic delamination study of coatings with and without mechanical defects10.1016/j.corsci.2014.01.007 ↗
49. An electrochemical study of the delamination of polymer coatings on galvanized steel10.1016/j.corsci.2004.08.017 ↗
50. Kelvin probe force microscopy and its application10.1016/j.surfrep.2010.10.001 ↗
51. Application of scanning kelvin probe in corrosion science10.1201/9781420028331.ch16 ↗
52. Characterization of corrosion interfaces by the scanning kelvin probe force microscopy technique10.1149/1.1359199 ↗
53. Degradation of organic coatings in a corrosive environment: a study by scanning Kelvin probe and scanning acoustic microscope10.1016/j.porgcoat.2004.04.004 ↗
54. High-resolution Kelvin probe microscopy in corrosion science: scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP)10.1016/j.electacta.2007.03.016 ↗
55. Surface modification by ordered monolayers: new ways of protecting materials against corrosion10.1557/S0883769400052696 ↗
56. Demonstration of epoxy/carbon steel interfacial delamination behavior: electrochemical impedance and X-ray spectroscopic analyses10.1016/j.corsci.2015.10.024 ↗
57. Scanning Kelvin probe blister studies of the delamination of epoxy films on organosilane modified ZnMgAl alloy coated steel10.1002/maco.201709462 ↗