Influence of solvent composition on the anti-corrosion performance of copper–polypyrrole (Cu–PPy) coated 304 stainless steel
Source abstract
Abstract
Abstract Copper–polypyrrole (Cu–PPy) was electrochemically deposited on 304 stainless steel (SS) surfaces from various compositions of water–methanol binary mixtures containing both pyrrole monomer and metal precursor using double pulse chronoamperometry. Scanning electron microscopy (SEM) and energy dispersive analysis of X-ray (EDAX) were employed to understand the morphology and composition of the Cu–PPy coated SS. The anti-corrosive performances of the modified electrodes were investigated in 0.5 M NaCl using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. We found that after 300 h of immersion period, the Cu–PPy coating prepared from a solution containing 1:4 water to methanol volume ratio exhibited a better corrosion protection to SS than coatings prepared from other compositions. This behavior was rationalized using the low permeability and enhancement in the barrier property of the Cu–PPy coatings with increase in MeOH content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Metastable pitting corrosion of 304 stainless steel in 3.5% NaCl solution10.1016/j.corsci.2014.04.033 ↗
2. Origins of pitting corrosion10.1179/147842204225016859 ↗
3. A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al–Cu solid solution alloys10.1016/j.electacta.2006.08.054 ↗
4. Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels10.1016/S1674-4799(09)60090-X ↗
5. Role of supporting electrolyte on the corrosion performance of poly(carbazole) films deposited on stainless steel10.1016/j.corsci.2013.08.001 ↗
6. Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell10.1016/j.jpowsour.2005.09.037 ↗
7. Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating10.1016/j.jpowsour.2009.10.003 ↗
8. Copper modified poly-6-amino-m-cresol (poly-AmC/Cu) coating for mild steel protection10.1016/j.surfcoat.2008.11.030 ↗
9. Synthesis of zinc modified poly(aniline-co-pyrrole) coatings and its anti-corrosive performance on low nickel stainless steel10.1016/j.colsurfa.2014.10.011 ↗
10. Synthesis of sea urchin-like polystyrene/polyaniline microspheres by seeded swelling polymerization and their catalytic application10.1016/j.colsurfa.2013.10.034 ↗
11. Corrosion inhibition of polyaniline and poly(o-methoxyaniline) on stainless steels10.1016/S0379-6779(02)00178-9 ↗
12. Electrochemical and mechanical properties of polypyrrole coatings on steel10.1016/j.electacta.2004.01.074 ↗
13. Electrochemical synthesis of polyaniline on mild steel in acetonitrile-LiClO4 and corrosion performance10.1016/j.apsusc.2004.05.001 ↗
14. The electrochemical copolymerization of pyrrole and bithiophene on stainless steel in the presence of SDS in aqueous medium and its anticorrosive performance,10.1016/j.porgcoat.2014.03.026 ↗
15. Electroactive polymer films for stainless steel corrosion protection10.1023/A:1024431114822 ↗
16. Polypyrrole layers for steel protection10.1016/S0169-4332(00)00866-7 ↗
17. The corrosion behaviour of polypyrrole coating synthesized in phenylphosphonic acid solution10.1016/j.apsusc.2005.04.004 ↗
18. Cyclic voltammetric synthesis of poly(N-methyl pyrrole) on copper and effects of polymerization parameters on corrosion performance10.1021/ie300208c ↗
19. Application of conducting polymers in corrosion protection10.1007/BF02696146 ↗
20. Effect of the polymer layers and bilayers on the corrosion behaviour of mild steel: comparison with polymers containing Zn microparticles,10.1016/j.porgcoat.2005.07.001 ↗
21. Corrosion protection of iron by polypyrrole modified by copper using the cementation process10.1016/S0010-938X(03)00043-X ↗
22. The effect of polypyrrole and nickel+polypyrrole coatings on corrosion behaviour AISI 304 stainless steel10.1134/S2070205115010025 ↗
23. Electrochemical deposition of copper in polyaniline films—number density and spatial distribution of deposited metal clusters10.1016/S1388-2481(00)00072-2 ↗
24. Copper/polypyrrole multilayer coating for 7075 aluminum alloy protection10.1016/j.porgcoat.2011.08.006 ↗
25. Silver electrodeposition from water–acetonitrile mixed solvents and mixed electrolytes in the presence of tetrabutylammonium perchlorate. Part I—Electrochemical nucleation on glassy carbon electrode10.1007/s10008-008-0732-y ↗
26. Polypyrrole conducting electroactive polymers: synthesis and stability studies10.1155/2006/860413 ↗
27. Electropolymerization of pyrrole on Fe an electrodes in methanol and acetonitrile. Evidence of interfacial layers resulting from accumulation and decomposition of the supporting electrolyte10.1002/sia.740200902 ↗
28. Electropolymerization of thiophene on oxidizable metals in organic media10.1016/S0022-0728(97)00044-2 ↗
29. Low potential anodic polymerization of benzene in methanesulfonic and trifluoromethanesulfonic acid solutions10.1016/0379-6779(92)90290-Y ↗
30. A new method for obtaining polyparaphenylene films by electrochemical oxidation of (Benzene-SbF5) π-complexes in SO2 medium10.1016/0379-6779(89)90833-3 ↗
31. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
32. An investigation into the nucleation and growth of an electropolymerized polypyrrole coating on a 316L stainless steel surface10.1016/j.tsf.2008.02.049 ↗
33. Nucleation and growth kinetics of electrodeposited sulfate-doped polypyrrole: determination of the diffusion coefficient of SO42− in the polymeric membrane10.1021/jp102676q ↗
34. Landau · 1960
35. Electrosynthesis and analytical characterisation of polypyrrole thin films modified with copper nanoparticles10.1039/b009857o ↗
36. Mechanism of underpotential deposition of metal on conducting polymers10.1016/S0379-6779(01)00581-1 ↗
37. Synthesis of poly[(pyrrole-2, 5-diyl)-co-(4-hydroxylbenzylidene)] catalysed by maghnite H+10.13005/ojc/290446 ↗
38. Polypyrrole and polypyrrole–tungstate electropolymerization coatings on carbon steel and evaluating their corrosion protection performance via electrochemical impedance spectroscopy10.1016/j.porgcoat.2008.08.003 ↗
39. EIS study of environmentally friendly coil coating performances
40. Corrosion protection aspects of electrochemically synthesized poly(o-anisidine-co-o-toluidine) coatings on copper10.1016/j.electacta.2007.03.043 ↗
41. Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution10.1016/j.porgcoat.2006.05.003 ↗
42. Inhibition of nickel coated mild steel corrosion by electrosynthesized polyaniline coatings10.1016/j.electacta.2010.12.096 ↗
43. Inhibition of steel corrosion by electrosynthesized poly(o-anisidine)-dodecylbenzenesulfonate coatings10.1016/j.electacta.2010.05.099 ↗
44. Electrochemical synthesis of poly(N-methylaniline) on an iron electrode and its corrosion performance10.1016/j.electacta.2008.02.055 ↗