Preparation of α-Fe2O3@TA@GO composite material and its anticorrosion performance in epoxy modified acrylic resin coatings
Source abstract
Abstract
Abstract Adding organic-inorganic composite materials is a common way to improve the anti-corrosion performance of organic coatings. In this study, tannic acid as a bridge was first modified with the mica iron oxide, and then reacted with the carboxyl group on the surface of graphene oxide. Mica iron oxide @ tannic acid @ graphene oxide (α-Fe2O3@TA@GO) composite materials were prepared and characterized by infrared spectroscopy, x-ray diffractometer, x-ray photoelectron spectrometer, and scanning electron microscope. The modified products showed good dispersion stability in water, and the sedimentation time was increased from 3 h to 24 h. Composite materials were doped in waterborne epoxy modified acrylic to manufactured coatings. The electrochemical workstation was used to evaluate the corrosion performance of coatings. It was found that the corrosion resistance of the paint film could be greatly improved by adding composite materials characterized by Potentiodynamic polarization curves and EIS analysis. The optimal corrosion resistance can be obtained by adding 5wt% α-Fe2O3@TA@GO fillers. The corrosion current density (icorr) was 1.459 μA/cm2 and the charged transfer resistance (Rct) was up to 14350 Ω cm2, which was shown good potential as anti-corrosive fillers in coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A brief review on the erosion-corrosion behavior of engineering materials10.1515/corrrev-2018-0022 ↗
2. Active corrosion protection performance of an epoxy coating applied on the mild steel modified with an eco-friendly sol-gel film impregnated with green corrosion inhibitor loaded nanocontainers10.1016/j.apsusc.2018.01.185 ↗
3. Evaluation of the corrosion resistance of an epoxy-polyamide coating containing different ratios of micaceous iron oxide/Al pigments10.1016/j.corsci.2011.01.045 ↗
4. Electrochemical behavior of nano-iron oxide modified alkyd based waterborne coatings10.1016/j.matchemphys.2009.07.010 ↗
5. Effects of multiwall carbon nanotube addition on the corrosion resistance and underwater acoustic absorption properties of polyurethane coatings10.1016/j.porgcoat.2018.04.033 ↗
6. Study on synthesis and anticorrosion properties of polymer nanocomposites based on super paramagnetic Fe2O3·NiO nanoparticle and polyaniline10.1016/j.synthmet.2009.01.020 ↗
7. Electrochemical impedance spectroscopy (EIS) study of nano-alumina modified alkyd based waterborne coatings10.1016/j.porgcoat.2011.11.020 ↗
8. Efficient Graphene/Cyclodextrin-Based nanocontainer: synthesis and host–guest inclusion for self-healing anticorrosion application10.1021/acsami.8b11108 ↗
9. Gas-phase synthesis of iron oxide nanoparticles for improved magnetic hyperthermia performance10.1016/j.jallcom.2020.153814 ↗
10. Synthesis and characterization of stable Iron oxide nanoparticle with amino covalent binding on the surface for biomedical application10.1007/s10876-016-1007-x ↗
11. Corrosion protective properties of epoxy coating containing tetraaniline modified nano-α-Fe2O310.1016/j.porgcoat.2019.04.010 ↗
12. Effect of vegetal tannin on anodic copper dissolution in chloride solutions10.1016/j.corsci.2003.10.022 ↗
13. On the tannic acid interaction with metallic iron10.1023/A:1013838600599 ↗
14. Inhibitive action of mangrove tannins and phosphoric acid on pre-rusted steel via electrochemical methods10.1016/j.corsci.2008.02.013 ↗
15. Mangrove tannins and their flavanoid monomers as alternative steel corrosion inhibitors in acidic medium10.1016/j.corsci.2006.04.013 ↗
16. Comparative corrosion resistance of graphene sheets with different structures in waterborne epoxy coatings10.1016/j.colsurfa.2018.08.045 ↗
17. Development and characterization of anticorrosion and antifriction properties for high performance polyurethane/graphene composite coatings10.3390/coatings8070250 ↗
18. A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance10.1016/j.cej.2016.06.028 ↗
19. Preparation of graphene-based poly(vinyl alcohol)/chitosan nanocomposites membrane for alkaline solid electrolytes membrane10.1016/j.memsci.2014.12.028 ↗
20. Electrochemical sensitive determination of acetaminophen in pharmaceutical formulations at iron oxide/graphene composite modified electrode10.1016/j.arabjc.2019.08.001 ↗
21. Synthesis of graphene-modified Li3V2(PO4)3 with superior electrochemical properties via a catalytic solid-state-reaction process10.1016/j.jallcom.2017.04.313 ↗
22. Influence of graphene microstructures on electrochemical performance for supercapacitors10.1016/j.pnsc.2015.10.004 ↗
23. Iron oxides in the laboratory. Preparation and characterization. Von U. Und R. M. Cornell
24. Using high-temperature mechanochemistry treatment to modify iron oxide and improve the corrosion performance of epoxy coating – I. High-temperature ball milling treatment10.1016/j.corsci.2014.04.015 ↗
25. Gallic acid a model of tannins in condensation with formaldehyde10.1016/0040-6031(95)02630-4 ↗
26. Metal-polyphenol dual crosslinked graphene oxide membrane for desalination of textile wastewater10.1016/j.desal.2020.114503 ↗
27. Polycationic condensed tannin/polysaccharide-based polyelectrolyte multilayers prevent microbial adhesion and proliferation10.1016/j.eurpolymj.2020.109677 ↗
28. Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets10.1016/j.corsci.2016.04.004 ↗
29. Controlled growth of single-crystalline nanostructured dendrites of α-Fe2O3 blended with MWCNT: a systematic investigation of highly selective determination of l-dopa10.1039/c4ra01451k ↗
30. Development of a magnetic core-shell Fe3O4@TA@UiO-66 microsphere for removal of arsenic(III) and antimony(III) from aqueous solution10.1016/j.jhazmat.2019.05.114 ↗
31. Green and facile synthesis of polyaniline/tannic acid/rGO composites for supercapacitor purpose10.1007/s10853-019-03654-x ↗
32. Fabricating binary anti-corrosion structures containing superhydrophobic surfaces and sturdy barrier layers for Al alloys10.1039/C5RA25153B ↗
33. Steel corrosion lowering in front of the saline solution by a nitrogen-rich source of green inhibitors : detailed surface, electrochemical and computational studies10.1016/j.conbuildmat.2020.119266 ↗
34. Synergistic effect of polypyrrole-intercalated graphene for enhanced corrosion protection of aqueous coating in 3.5% NaCl solution10.1021/acsami.7b08325 ↗
35. Facile Preparation of Water-Dispersible Graphene Sheets Stabilized by Carboxylated Oligoanilines and Their Anticorrosion Coatings10.1021/acsami.5b05531 ↗
36. Mechanical and anticorrosion properties of nanosilica-filled epoxy-resin composite coatings10.1016/j.apsusc.2013.11.155 ↗
37. Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel10.1016/j.corsci.2016.11.008 ↗
38. The failure behaviour of an epoxy glass flake coating/steel system under marine alternating hydrostatic pressure10.1016/j.corsci.2014.04.038 ↗
39. Study of the failure mechanism of an epoxy coating system under high hydrostatic pressure10.1016/j.corsci.2013.04.012 ↗
40. Graphene as a long-term metal oxidation barrier: worse than nothing10.1021/nn4014356 ↗
41. Enhanced corrosion resistance of waterborne polyurethane containing sulfonated graphene/zinc phosphate composites10.1016/j.porgcoat.2019.04.013 ↗
42. Corrosion protection performance of waterborne epoxy coatings containing self-doped polyaniline nanofiber10.1016/j.apsusc.2017.02.142 ↗
43. Combined tannate/decanoate coatings10.1016/j.culher.2013.10.004 ↗
44. Application of infrared spectroscopy for investigation of rust phase component conversion by agents containing oak tannin and phosphoric acid10.5006/1.3585278 ↗
45. Self-healing performance and corrosion resistance of graphene oxide – mesoporous silicon layer – nanosphere structure coating under marine alternating hydrostatic pressure10.1016/j.cej.2018.12.124 ↗
46. The application of infrared spectroscopy to a study of phosphoric and tannic acids interactions with magnetite (Fe3O4), goethite (α-FeOOH) and lepidocrocite (γ-FeOOH)10.1016/S0010-938X(97)00060-7 ↗
47. The inhibition effect of tannic acid on mild steel corrosion in seawater wet/dry cyclic conditions10.1016/j.corsci.2013.01.040 ↗