The effect of mechanical and thermal stresses on the performance of lubricated icephobic coatings during cyclic icing/deicing tests
Source abstract
Abstract
Evaluating the performance of icephobic coatings interests various industries, such as aviation, maritime, energy, and transportation. Recent developments on icephobic coatings have consistently highlighted the need for durable icephobic surfaces in cold conditions. This study investigates the icing performance and durability of lubricated polymer coatings under cyclic icing/deicing tests. Coatings were made of polyethylene and a solid lubricant and manufactured using flame spray technology. Icing was performed by accreting ice in an icing wind tunnel. Deicing was conducted by removing ice with a centrifugal ice adhesion tester. Surface properties, such as surface morphology, roughness, wettability and chemical composition, were measured before and after the cyclic tests. The results showed stable icephobic behaviour for some coatings, while the performance of others decreased over the cycles. The cyclic tests caused mechanical damage to the surfaces, producing erosion, scratches and, for some coatings, surface cracks. These defects resulted in increased surface roughness and reduced hydrophobicity. However, no chemical changes were revealed for any of the surfaces. Moreover, the causes of cracks were attributed to the difference in thermal expansion behaviour of substrate and coating materials. This result highlights the importance of materials and process parameters selection in flame sprayed coatings designed for cold applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Icing and De-icing Technologies · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Farzaneh · 2008
2. Icephobic surfaces: features and challenges
3. Icephobic surfaces: definition and figures of merit10.1016/j.cis.2019.04.005 ↗
4. Advanced icephobic coatings10.1163/016942410X533372 ↗
5. Designing durable icephobic surfaces10.1126/sciadv.1501496 ↗
6. Physics of icing and rational design of surfaces with extraordinary icephobicity10.1021/la502586a ↗
7. On the relationship between surface free energy and ice adhesion of flat anti-icing surfaces
8. Design of anti-icing surfaces: smooth, textured or slippery?10.1038/natrevmats.2015.3 ↗
9. Durable and scalable icephobic surfaces: similarities and distinctions from superhydrophobic surfaces10.1039/C5SM02295A ↗
10. Characterization and distribution of water-repellent, self-cleaning plant surfaces10.1006/anbo.1997.0400 ↗
11. Recent progress in preparation and anti-icing applications of superhydrophobic coatings10.3390/coatings8060208 ↗
12. Robust anti-icing performance of a flexible superhydrophobic surface10.1002/adma.201602480 ↗
13. Anti-icing performance of superhydrophobic surfaces10.1016/j.apsusc.2011.02.057 ↗
14. Anti-icing superhydrophobic coatings10.1021/la902882b ↗
15. Recent studies on super-hydrophobic films
16. Bioinspired Surfaces with superwettability for anti-icing and ice-phobic application: concept, mechanism, and design10.1002/smll.201701867 ↗
17. Fundamentals of icing and common strategies for designing biomimetic anti-icing surfaces10.1039/C8TA03259A ↗
18. Bio-inspired strategies for anti-icing10.1021/nn406522n ↗
19. Are superhydrophobic surfaces best for icephobicity?10.1021/la104762g ↗
20. Condensation and freezing of droplets on superhydrophobic surfaces10.1016/j.cis.2013.10.018 ↗
21. Superhydrophobic surfaces: are they really ice-repellent?10.1021/la104277q ↗
22. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity10.1038/nature10447 ↗
23. Highly transparent and robust slippery lubricant-infused porous surfaces with anti-icing and anti-fouling performances10.1016/j.jallcom.2019.06.241 ↗
24. Icephobicity of slippery liquid infused porous surfaces under multiple freeze-thaw and ice accretion-detachment cycles10.1002/admi.201800828 ↗
25. Improved icephobic properties on surfaces with a hydrophilic lubricating liquid10.1021/acsami.5b07265 ↗
26. Improvement of lubricant-infused surfaces for anti-icing applications10.1680/jsuin.16.00026 ↗
27. Ice adhesion on lubricant-impregnated textured surfaces10.1021/la402456c ↗
28. Ice accretion by spraying supercooled droplets is not dependent on wettability and surface free energy of substrates10.1016/j.colsurfa.2016.05.065 ↗
29. Thermally sprayed coatings: novel surface engineering strategy towards icephobic solutions10.3390/ma13061434 ↗
30. Relationships between water wettability and ice adhesion10.1021/am1006035 ↗
31. Room temperature characteristics of polymer-based low ice adhesion surfaces
32. Anti-icing behavior of thermally sprayed polymer coatings10.1007/s11666-016-0501-x ↗
33. Icephobic behaviour and thermal stability of flame-sprayed polyethylene coating: the effect of process parameters10.1007/s11666-019-00947-0 ↗
34. Enhancing the mechanical durability of icephobic surfaces by Introducing autonomous self-healing function10.1021/acsami.8b01866 ↗
35. Durability enhancement of low ice adhesion polymeric coatings10.1016/j.porgcoat.2020.106033 ↗
36. Testing the durability of anti-icing coatings
37. Lubricated icephobic coatings prepared by flame spraying with hybrid feedstock injection10.1016/j.surfcoat.2020.126396 ↗
38. Hot-melt coating with lipid excipients10.1016/j.ijpharm.2012.10.026 ↗
39. Perfluoroalkane wax infused gels for effective, regenerating, anti-icing surfaces10.1039/C8CC09818B ↗
40. Research on icing behavior and ice adhesion testing of icephobic surfaces
41. Stenroos · 2015
42. Icephobic performance of different surface designs and materials
43. Interlaboratory study of ice adhesion using different techniques10.3390/coatings9100678 ↗
44. On the icephobic behavior of organosilicon-based surface structures developed through atmospheric pressure plasma deposition in nitrogen plasma10.3390/coatings9100679 ↗
45. The need for standards in low ice adhesion surface research: a critical review10.1080/01694243.2019.1679523 ↗
46. A critical review of the measurement of ice adhesion to solid substrates10.1016/j.paerosci.2018.03.001 ↗
47. Rational nanostructuring of surfaces for extraordinary icephobicity10.1039/C3NR06644D ↗
48. Superhydrophobic surfaces cannot reduce ice adhesion10.1063/1.4752436 ↗
49. A novel simple anti-ice aluminum coating: synthesis and in-lab comparison with a superhydrophobic hierarchical surface10.3390/coatings10020111 ↗
50. Combination of functional nanoengineering and nanosecond laser texturing for design of superhydrophobic aluminum alloy with exceptional mechanical and chemical properties10.1021/acsnano.7b04634 ↗
51. Durable icephobic coating for stainless steel10.1021/am3031272 ↗
52. Ice adhesion - theory, measurements and countermeasures10.1163/016942411X574583 ↗
53. Durable ice-lubricating surfaces based on polydimethylsiloxane embedded silicone oil infused silica aerogel10.1016/j.apsusc.2020.145728 ↗
54. Durability of superhydrophobic duplex coating systems for aerospace applications10.1016/j.surfcoat.2020.126249 ↗
55. Performance and durability tests of smart icephobic coatings to reduce ice adhesion10.1016/j.apsusc.2017.02.206 ↗
56. Durability of superhydrophobic laser-treated metal surfaces under icing conditions
57. Durability of lubricated icephobic coatings under multiple icing/deicing cycles
58. On ice-releasing properties of rough hydrophobic coatings10.1016/j.coldregions.2010.01.001 ↗
59. Silicone nanofilaments grown on aircraft alloys for low ice adhesion10.1016/j.surfcoat.2021.126971 ↗
60. Assessment of icephobic coatings—how can we monitor performance durability?10.3390/coatings11060614 ↗
61. Development of sol-gel icephobic coatings: effect of surface roughness and surface energy10.1021/am504348x ↗
62. Characterization of ice-phobic surfaces: improvements on contact angle measurements10.1016/j.measurement.2017.06.036 ↗
63. Wetting and roughness10.1146/annurev.matsci.38.060407.132434 ↗
64. Upper limits to the contact angles of liquids on solids
65. Superhydrophobic states10.1038/nmat924 ↗
66. Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface10.1016/j.apsusc.2011.02.049 ↗
67. Antifogging abilities of model nanotextures10.1038/nmat4868 ↗
68. Durability assessment of icephobic coatings
69. Modeling residual stress development in thermal spray coatings: current status and way forward10.1007/s11666-017-0590-1 ↗
70. Residual stresses in coating technology
71. Fracture energy of automotive clearcoats - I. Experimental methods and mechanics10.1016/S0141-3910(97)00081-5 ↗