journal article·2021-02Open access

Use of alumina sludge arising from an electrocoagulation process as functional mesoporous microcapsules for active corrosion protection of aluminum

J.J. Santana, V.F. Mena, A. Betancor-Abreu, R. Rodríguez-Raposo, J. Izquierdo, R.M. Souto

Abstract

The process of fluoride removal from underground water using the electrocoagulation technique with aluminum electrodes results in the generation of large amounts of drinking-water treatment sludge (DWTS) corresponding to electrocoagulated metal hydroxide sludge (EMHS). EMHS, hazardous for the environment, must be adequately managed from the water treatment plant, causing an additional cost to the process and an environmental impact from its disposal. In this study, the revaluation of the EMHS produced using a laboratory scale electrocoagulation reactor with aluminum was investigated for the manufacture of mesoporous alumina microcapsules (MAMs). The obtained microcapsules have been characterized using X-ray diffractometry (XRD), scanning electron microscopy (SEM), Zeta-potential measurement, thermal gravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) techniques, allowing them to be classified as mesoporous particles of micro and nanometer dimensions. These particles were used as microcapsules to contain corrosion inhibitors (namely, 8-hydroxyquinoline and benzotriazole), and they were subsequently dispersed in a commercial polymer matrix employed to protect aluminum from the corrosive attack of the environment. The corrosion resistance of the resulting functionalized coatings has been characterized by electrochemical impedance spectroscopy (EIS) in the case of artificially-defective coatings, demonstrating that these MAM’s released locally the corrosion inhibitor to effectively heal the damaged area of the metal. The overall study demonstrates that the electrocoagulation sludge can be employed to produce microcapsules for efficient anticorrosion protection of engineering metals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Advanced oxidation water treatment · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Drinking water treatment sludge as an efficient adsorbent for heavy metals removal10.1016/j.clay.2017.06.027 ↗
2. Evaluation and reutilization of water sludge from fresh water processing plant as a green clay substituent10.1016/j.clay.2017.04.007 ↗
3. Human fluorosis related to volcanic activity: a review, Environmental Toxicology10.2495/ETOX060031 ↗
4. Groundwater intensive exploitation and mining in Gran Canaria and Tenerife, Canary Islands, Spain: Hydrogeological, environmental, economic and social aspects10.1016/j.scitotenv.2016.03.038 ↗
5. World Health Organization · 2001
6. EU Directive, EU Water framework directive. Available from: https://eur-lex.europa.eu/legal-content/ES/TXT/?uri=uriserv:OJ.L_.2015.260.01.0006.01.SPA (retrieved 15.05.2020).
7. Real Decreto 140/2003, de 7 de febrero (BOE núm.45, de 21/02/2003). Available from: https://www.boe.es/buscar/act.php?id=BOE-A-2003-3596 (retrieved 15.05.2020).
8. Defluoridation of Morocco drinking water by electrocoagulation/electroflottation in an electrochemical external-loop airlift reactor10.1016/j.cej.2008.08.014 ↗
9. Effective removal of fluoride from ground water using electro-coagulation
10. General potential-current model and validation for electrocoagulation10.1016/j.electacta.2014.02.089 ↗
11. Comparison and understanding of fluoride removal mechanism in Ca2+, Mg2+ and Al3+ ion assisted electrocoagulation process using Fe and Al electrodes10.1016/j.jece.2015.06.014 ↗
12. Fluoride removal from natural volcanic underground water by an electrocoagulation process: parametric and cost evaluations10.1016/j.jenvman.2019.05.147 ↗
13. Electrochemistry and the environment10.1007/BF00241305 ↗
14. Fundamentals, present and future perspectives of electrocoagulation10.1016/j.jhazmat.2004.08.009 ↗
15. Fluoride removal by a continuous flow electrocoagulation reactor10.1016/j.jenvman.2008.06.001 ↗
16. Electrochemical technologies in wastewater treatment10.1016/j.seppur.2003.10.006 ↗
17. Electrocoagulated metal hydroxide sludge for fluoride and arsenic removal in aqueous solution: characterization, kinetic and equilibrium studies
18. Treatment of dairy effluents by electrocoagulation using aluminium electrodes10.1016/j.scitotenv.2009.10.026 ↗
19. Simultaneous removal of fluoride and arsenic from well water by electrocoagulation10.1016/j.scitotenv.2019.04.400 ↗
20. Emerging technologies for arsenic removal from drinking water in rural and peri-urban areas: Methods, experience from, and options for Latin America10.1016/j.scitotenv.2019.07.233 ↗
21. Separate and simultaneous removal of doxycycline and oxytetracycline antibiotics by electro-generated adsorbents (EGAs)10.1016/j.jece.2018.102876 ↗
22. Reuse of de-inking sludge from wastepaper recycling in cement mortar products10.1016/j.jenvman.2011.03.028 ↗
23. Utilization of water treatment plant sludge in structural ceramics bricks10.1016/j.clay.2015.09.012 ↗
24. Optical properties of nanoporous anodic alumina and derived applications
25. Characterization of water treatment sludge and its reuse as coagulant10.1016/j.jenvman.2016.08.010 ↗
26. Micro- and nanoparticles of mesoporous anodic alumina: morphological and physicochemical properties10.1016/j.micromeso.2016.10.034 ↗
27. Biomimetic nanoporous anodic alumina distributed Bragg reflectors in the form of films and microsized particles for sensing applications10.1021/acsami.5b05904 ↗
28. Rational design of ultra-short anodic alumina nanotubes by short-time pulse anodization10.1016/j.electacta.2014.12.056 ↗
29. Protective abilities of nanocomposite coatings containing Al2O3 nano-particles loaded by CeCl310.1016/j.porgcoat.2011.02.013 ↗
30. Layer-by-layer assembled nanocontainers for self-healing corrosion protection10.1002/adma.200502053 ↗
31. Surface-engineered nanocontainers for entrapment of corrosion inhibitors10.1002/adfm.200601226 ↗
32. Characterization of inhibitor release from Zn-Al-[V10O28]6− hydrotalcite pigments and corrosion protection from hydrotalcite-pigmented epoxy coatings10.5006/1.3278468 ↗
33. Functional self-healing coatings: a new trend in corrosion protection by organic coatings
34. Organic corrosion inhibitors for aluminium and its alloys in chloride and alkaline solutions: A review10.1016/j.arabjc.2016.08.009 ↗
35. An electrochemical impedance study of the corrosion inhibition of a 2024 aluminum alloy in neutral chloride solution10.4028/www.scientific.net/MSF.192-194.599 ↗
36. Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy10.1016/j.corsci.2005.05.040 ↗
37. High effective organic corrosion inhibitors for 2024 aluminium alloy10.1016/j.electacta.2007.05.058 ↗
38. The effect of inhibitor structure on the corrosion of AA2024 and AA707510.1016/j.corsci.2011.02.040 ↗
39. Effectiveness of 2-mercaptobenzothiazole, 8-hydroxyquinoline and benzotriazole as corrosion inhibitors on AA 2024-T3 assessed by electrochemical methods10.1002/sia.5810 ↗
40. Synergistic effect between 8-hydroxyquinoline and benzotriazole for the corrosion protection of 2024 aluminium alloy: A local electrochemical impedance approach10.1016/j.corsci.2015.09.002 ↗
41. Benzotriazole and cerium chloride as corrosion inhibitors for AA2024-T3: An EIS investigation supported by SVET and ToF-SIMS analysis10.1016/j.corsci.2017.11.004 ↗
42. Influence of inhibitor addition on the corrosion protection performance of sol–gel coatings on AA202410.1016/j.porgcoat.2007.12.002 ↗
43. A hollow porous Mn2O3 microcontainer for encapsulation and release of corrosion inhibitors10.1149/2.003310eel ↗
44. Electrochemical study of the corrosion inhibition ability of “smart” coatings applied on AA202410.1007/s10008-013-2078-3 ↗
45. Multifunctional epoxy coatings combining a mixture of trapes and inhibitor loaded nanocontainers for corrosion protection of AA2024-T310.1016/j.corsci.2014.04.009 ↗
46. Sub-micrometer mesoporous silica containers for active protective coatings on AA 2024-T310.1016/j.corsci.2017.08.030 ↗
47. An investigation of the corrosion inhibition of pure aluminum in neutral and acidic chloride solutions10.1016/0013-4686(95)00472-6 ↗
48. The role of chelating agents on the corrosion mechanisms of aluminium in alkaline aqueous solutions10.1016/j.corsci.2008.10.035 ↗
49. Influence of 8-hydroxyquinoline addition on the corrosion behavior of commercial Al and Al-HO411 alloys in NaOH aqueous media10.1016/j.corsci.2011.05.045 ↗
50. A newly synthesized sulphated 8-hydroxyquinoline derivative to effectively control aluminum corrosion in perchloric acid: Electrochemical and positron annihilation studies10.1016/j.molliq.2015.11.056 ↗
51. Lifetime prediction for organic coatings on steel and a magnesium alloy using electrochemical impedance methods10.5006/1.3293547 ↗
52. Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings10.1007/BF00262955 ↗
53. Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals10.1016/0300-9440(95)00581-1 ↗
54. Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion10.1016/0013-4686(95)00440-8 ↗
55. Resistance of metallic substrates protected by an organic coating containing glass flakes10.1016/j.porgcoat.2010.01.005 ↗
56. ASTM International · 2017
57. Design and optimization of an electrocoagulation reactor for fluoride remediation in underground water sources for human consumption
58. Yeum · 2001
59. Novel synthesis and thermal behavior of aluminum hydroxyl fluorides AlFx(OH)3-x10.1021/cm801236v ↗
60. Structure and properties of noncrystalline aluminum oxide-hydroxide fluorides10.1021/cm903573a ↗
61. The thermal transformation of gelatinous aluminium hydroxide10.1002/zaac.19723910210 ↗
62. Fabrication and optical characterization of nanoporous alumina films annealed at different temperatures10.1016/j.optmat.2008.09.008 ↗
63. Production of γ-Al2O3 from Kaolin10.4236/ojpc.2011.12004 ↗
64. Fluoride desorption of secondary alumina at high temperatures10.5796/electrochemistry.81.535 ↗
65. Performance and mass transfer of aqueous fluoride removal by a magnetic alumina aerogel10.1039/C6RA23532H ↗
66. Quinoline and isoquinoline
67. Nanostructured sol-gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3. Corrosion protection performance10.1016/j.electacta.2005.04.021 ↗
68. Self-healing epoxy coatings loaded with inhibitor-containing polyelectrolyte nanocapsules10.1016/j.porgcoat.2015.02.011 ↗
69. Influence of cerium molybdate containers on the corrosion performance of aluminium alloys 2024-T310.1016/j.corsci.2011.07.026 ↗
70. Investigating local corrosion behavior and mechanism of MAO coated 7075 aluminum alloy10.1016/j.jallcom.2020.153976 ↗
71. Note on the parameterization of the constant-phase admittance element10.1016/0167-2738(84)90049-3 ↗
72. Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating10.1016/S0300-9440(01)00139-4 ↗