AC interference impact on EIS assessment of organic coatings using dummy cells, calibration foils and field exposed coated samples
Source abstract
Abstract
Field application of EIS to intact and scarcely degraded high-performance protective coatings is challenging because of ambient electromagnetic fields, which cause stochastic variations in the phase angle and, to a lesser extent, in the impedance modulus of the coating spectra. AC interferences with amplitudes between 10 and 800 mV were induced on dummy cells and calibration foils to systematically investigate the effects of interference impact on the accuracy and precision of measurements with the EIS setup intended for use on coatings in the field. For EIS signal amplitudes between 10 and 250 mV and the AC interference amplitudes ≤250 mV, the measurement accuracy and precision were limited by the synergistic influence of the AC interferences and the imprecision of the EIS instrument. For systems with impedance ≥ GΩ, the accuracy of the impedance logarithm was 97.8% at signal amplitudes ≥190 mV, and the precision increased from nearly 95% to 99% as the signal amplitude increased from 10 to 150 mV, indicating that very accurate and precise measurements can be obtained at higher signal amplitudes. An example of EIS measurements on coated samples exposed in the area of AC railway interferences is given. Although the quantitative conclusions may be instrument specific, they reflect well the declared capabilities of today's high-end EIS devices. The universal explanation is given in the context of equivalent circuit theory of the observed scatter in the EIS spectral data. The coating assessment was commented on in terms of the unique properties of the mean and relative standard deviation of impedance expressed on the logarithmic scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. EIS and organic coatings performance: revisiting some key points10.1016/j.electacta.2020.136725 ↗
2. EIS electrochemical impedance spectroscopy - a tool to predict remaining coating life
3. Non-substrate EIS monitoring of organic coatings with embedded electrodes10.1016/j.porgcoat.2009.10.001 ↗
4. Merten · 2014
5. Merten · 2020
6. Merten · 2019
7. Smart electrochemical portable tools for cultural heritage analysis: a review10.3390/s19194303 ↗
8. Gel-electrolyte EIS setup used for probing of IR dried/cured industrial coatings
9. Unified equivalent circuit of dielectric permittivity and porous coating formalisms for EIS probing of thick industrial grade coatings
10. A novel application of EIS for quantitative coating quality assessment during neutral salt spray testing of high-durability coatings
11. D.H. Johnson , Fundamentals of electrical engineering I, (n.d.). Themes - Fundamentals of Electrical Engineering I - OpenStax CNX (accessed September 9, 2021).
12. Electrochemical impedance and noise
13. Stupin · 2020
14. Correlation between different impedance measurement methods for battery cells
15. Harmonic analysis based method for linearity assessment and noise quantification in electrochemical impedance spectroscopy measurements: theoretical formulation and experimental validation for tafelian systems10.1016/j.electacta.2016.06.133 ↗
16. DMA, EIS and thermal fatigue of organic coatings10.1016/j.electacta.2019.06.066 ↗
17. Quantification of signal-to-noise ratio in cerebral cortex recordings using flexible MEAs with co-localized platinum black, carbon nanotubes, and gold electrodes10.3389/fnins.2018.00862 ↗
18. Haußmann · 2016 · 308
19. Review: nonlinear electrochemical impedance spectroscopy10.1149/2.0391707jes ↗
20. Meddings · 2020 · 480
21. Evaluating uncertainties in electrochemical impedance spectra of solid oxide fuel cells10.1016/j.apenergy.2021.117101 ↗
22. Zappen · 2018 · 1
23. Setup for simultaneous electrochemical and color impedance measurements of electrochromic films: theory, assessment and test measurement10.1063/1.5115119 ↗
24. J. Harper , Non-linear system analysis: the application of electrochemical impedance spectroscopy to the study of fuel cells and batteries operated under load, (n.d.). Solartron Analytical Application Guide, (n.d.).
25. Harmonic analysis based method for perturbation amplitude optimization for EIS measurements10.1149/2.1451713jes ↗
26. Harmonic analysis for identification of nonlinearities in impedance spectroscopy10.1016/j.electacta.2008.01.089 ↗
27. Thermal activation of impedance measurements on an epoxy coating for the corrosion protection: 1. Dielectric spectroscopy response in the dry state10.1016/j.electacta.2019.02.035 ↗
28. Thermal activation of impedance measurements on an epoxy coating for the corrosion protection: 2. Electrochemical impedance spectroscopy study10.1016/j.electacta.2019.03.007 ↗
29. Evaluation of a high resistance paint coating with EIS measurements: effect of high AC perturbations10.1016/j.porgcoat.2007.09.004 ↗
30. Different approaches in evaluating organic paint coatings with electrochemical impedance spectroscopy10.1179/174329408X326524 ↗
31. Coping with errors in electrochemical impedance spectroscopy data from coated metal
32. Random and systematic error as a function of sample area in electrochemical impedance spectroscopy data10.1016/j.porgcoat.2014.07.008 ↗
33. Commercial polymer films as calibration standards for EIS measurements10.1016/j.electacta.2005.10.031 ↗
34. Electrochemical impedance spectroscopy on UV-aged polyester coatings: possibilities and limits of modeling water diffusion
35. Dielectric properties of aged polyester films
36. Lvovich · 2012
37. EIS: electrochemical impedance spectroscopy a tool to predict remaining coating life?
38. Low-cost reliable corrosion sensors using ZnO-PVDF nanocomposite textiles10.3390/s21124147 ↗
39. Merten
40. Merten
41. Detecting and estimating the extent of automotive coating delamination and damage indexes after stone chipping using electrochemical impedance spectroscopy10.1016/j.porgcoat.2015.11.023 ↗
42. Quantitative coating quality assessment on offshore platform
43. Kaswan · 2020 · 219
44. Forcasting player behavioural data and simulating in-game events
45. Correlation research of phase angle variation and coating performance by means of Pearson’s correlation coefficient
46. Impedance analysis of the barrier effect of coil-coated materials: water uptake and glass transition variations
47. Barrier property determination and lifetime prediction by electrochemical impedance spectroscopy of a high performance organic coating10.15446/dyna.v81n183.37609 ↗
48. Evaluation of organic coatings with electrochemical impedance spectroscopy, part 2: application of EIS to coatings
49. On the possibility of using embedded electrodes for the measurement of dielectric properties in organic coatings10.1016/j.porgcoat.2006.09.035 ↗