journal article·2026-01Open access

Improving the properties of carbonated soybean oil-based non-isocyanate polyhydroxyurethane networks: Copolymerization versus hybridization with epoxy resin

Nahikari Martin-Larrañaga, Iker Razquin, Nora Aranburu, Oihane Sanz, Alba Gonzalez, Lourdes Irusta

Abstract

Carbonated soybean oil bio-based polyhydroxyurethanes (PHUs) produced without isocyanates often have inferior properties compared to their traditional isocyanate-based counterparts. To improve these properties, this study presents two strategies: copolymerization with other carbonated monomers and hybridization with epoxy monomers. Carbonated soybean oil (CSBO) and trimethylolpropane triglycidyl carbonate (TMPTC) were synthesized using the corresponding epoxidized monomers and carbon dioxide (CO 2 ). Various compositions polyhydroxyurethane (co)polymers were then prepared by an aminolysis reaction at 80 °C. CSBO/epoxy hybrids were also prepared by curing the samples with amines, first at room temperature and then at 80 °C. Fourier Transform Infrared Spectroscopy (FTIR) and gel content experiments showed that high conversion was achieved in both systems. Notably, the hybrid polymers exhibited a broader range of mechanical properties compared to the non-isocyanate polyurethane copolymers (NIPUs). Thus, the hybridization of CSBO with epoxy compounds offers a sustainable approach for the development of materials with different mechanical and barrier properties that can be customized for coating applications. While similar approaches have been individually studied, a direct comparison of their effectiveness within the same system remains unexplored. • NIPU polymers from epoxidized soybean oil and CO2 • Copolymerization with a shorter carbonated monomer versus hybridization with epoxy • High conversions for copolymers • In hybrids epoxy accelerates the carbonate reaction • Hybrid polymers show excellent mechanical properties and low water permeability
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Carbon dioxide utilization in catalysis · Polymer composites and self-healing · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Non-isocyanate polyurethanes derived from carbonated soybean oil: synthesis, characterization and comparison with traditional vegetable oil-based polyurethanes
2. Introduction to polyurethane chemistry10.1021/bk-2021-1380.ch001 ↗
3. Sustainable polyurethanes: toward new cutting-edge opportunities10.1016/j.progpolymsci.2024.101805 ↗
4. Polyurethane global demand, Statista (n.d.). https://www.statista.com/statistics/747004/polyurethane-demand-worldwide/ (accessed October 26, 2024).
5. Poly(hydroxyurethane): catalytic applicability for the cyclic carbonate synthesis from epoxides and CO210.1039/D0CC04463F ↗
6. N. Piyataksanon, M. Seadan, S. Suttiruengwong, Bio-based polyurethane derived from carbon dioxide and Epoxidized soybean oil, Suan Sunandha science and technology journal ©2022 Faculty of Sci. Technol. 09 (n.d.). doi:10.14456/ssstj.2022.7.10.53848/ssstj.v9i2.229 ↗
7. The hybrid polyhydroxyurethane materials synthesized by a prepolymerization method from CO2-sourced monomer and epoxy10.1016/j.jcou.2016.11.001 ↗
8. Skin exposure to isocyanates: reasons for concern10.1289/ehp.9557 ↗
9. Trends in non-isocyanate polyurethane (NIPU) development10.1039/D1CC05009E ↗
10. Bringing non-isocyanate polyurethanes closer to industrial implementation using carbonated soybean oil-based amino hardeners
11. Renewable polyurethanes from sustainable biological precursors10.1021/acs.biomac.0c01610 ↗
12. Thermosetting (bio)materials derived from renewable resources: a critical review10.1016/j.progpolymsci.2010.01.001 ↗
13. Xia · 2010
14. Glycerol-, pentaerythritol- and trimethylolpropane-based polyurethanes and their cellulose carbonate composites prepared via the non-isocyanate route with catalytic carbon dioxide fixation10.1039/c3gc00078h ↗
15. Unexpected synthesis of segmented poly(hydroxyurea-urethane)s from Dicyclic carbonates and diamines by Organocatalysis10.1021/acs.macromol.8b00731 ↗
16. High-impact PLA in compatibilized PLA/PCL blends: optimization of blend composition and type and content of compatibilizer10.1002/mame.202300213 ↗
17. Green chemistry influences in organic synthesis : a review, journal of multidisciplinary applied
18. A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route10.1039/D3RA08684D ↗
19. Enhanced and reusable poly(hydroxy urethane)-based low temperature hot-melt adhesives10.1021/acspolymersau.1c00053 ↗
20. Tailor-Made Bio-Based Non-Isocyanate Polyurethanes (NIPUs)10.3390/polym15061589 ↗
21. A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route10.1039/D3RA08684D ↗
22. Isocyanate free polyurethanes from new CNSL based bis-cyclic carbonate and its application in coatings10.1016/j.eurpolymj.2014.05.008 ↗
23. Solvent and catalyst-free synthesis of sunflower oil based polyurethane through non-isocyanate route and its coatings properties10.1016/j.eurpolymj.2018.03.030 ↗
24. Study of soybean oil-based non-isocyanate polyurethane films via a solvent and catalyst-free approach10.1021/acsomega.3c09185 ↗
25. Hybrid nonisocyanate polyurethanes (H-NIPUs): a pathway towards a broad range of novel materials10.1002/macp.202100437 ↗
26. In situ development of bio-based polyurethane-blend-epoxy hybrid materials and their nanocomposites with modified graphene oxide via non-isocyanate route10.1002/pi.5612 ↗
27. Non-isocyanate polyurethanes from carbonated soybean oil using monomeric or oligomeric diamines to achieve thermosets or thermoplastics10.1021/acs.macromol.5b02467 ↗
28. Non-isocyanate polyurethane/epoxy hybrid materials with different and controlled architectures prepared from a CO2-sourced monomer and epoxy via an environmentally-friendly route10.1039/C7RA04215A ↗
29. Preparation of non-isocyanate polyurethanes from epoxy soybean oil: dual dynamic networks to realize self-healing and reprocessing under mild conditions10.1039/D1GC01936H ↗
30. Carbonation of epoxidized soybean oil in supercritical CO2 assisted by imidazole-based organocatalysts
31. Recyclable non-isocyanate polyurethanes containing a dynamic covalent network derived from epoxy soybean oil and CO210.1039/D1QM00765C ↗
32. The improved synthesis of carbonated soybean oil using supercritical carbon dioxide at a reduced reaction time10.1039/b511014a ↗
33. How to explain low molar masses in PolyHydroxyUrethanes (PHUs)10.1016/j.eurpolymj.2015.07.020 ↗
34. Cascade Exotherms for rapidly producing hybrid nonisocyanate polyurethane foams from room temperature formulations10.1021/jacs.3c11637 ↗
35. Mechanical and adhesive properties of hybrid epoxy-polyhydroxyurethane network polymers10.1016/j.polymer.2019.121881 ↗
36. Application of TGA/FTIR to the study of the thermal degradation mechanism of silanized poly(ether-urethanes)10.1016/j.polymdegradstab.2012.06.019 ↗
37. Synthesis and comprehensive study on industrially relevant flame retardant waterborne polyurethanes based on phosphorus chemistry10.1016/j.porgcoat.2019.02.042 ↗
38. Recent progress in degradation and recycling of epoxy resin10.1016/j.jmrt.2024.08.095 ↗
39. Synthesis and evaluation of non-isocyanate polyurethane polyols for heat-cured thermoset coatings10.1016/j.porgcoat.2019.02.036 ↗
40. A. Bukowczan, I. Łukaszewska, K. Pielichowski, Thermal degradation of non-isocyanate polyurethanes, J Therm Anal Calorim 149 (123AD) 10885–10899. doi:https://doi.org/10.1007/s10973-024-13306-1.10.1007/s10973-024-13306-1 ↗
41. Wang · Mechanically strong non-isocyanate polyurethane thermosets from cyclic carbonate linseed oil · 2022
42. Preparation of non-isocyanate polyurethanes from epoxy soybean oil: dual dynamic networks to realize self-healing and reprocessing under mild conditions10.1039/D1GC01936H ↗
43. Synthesis and characterization of polyurethane networks derived from soybean-oil-based cyclic carbonates and bioderivable diamines10.1021/acssuschemeng.6b01409 ↗
44. Bio-based healable non-isocyanate polyurethanes driven by the cooperation of disulfide and hydrogen bonds10.1039/D0PY01249A ↗
45. Characterization Methods to Determine Interpenetrating Polymer Network (IPN) in Hydrogels10.3390/polym16142050 ↗
46. Tailoring the physical properties of non-isocyanate polyurethanes by introducing secondary amino groups along their main chain10.1016/j.molliq.2023.123263 ↗
47. Poly(ethylene oxide) bis(cyclic carbonate) based hydrophilic non-isocyanate polyhydroxyurethanes: polymer-water interactions and glass transition behavior10.1016/j.polymer.2024.127570 ↗
48. Toughening immiscible polymer blends: the role of Interface-crystallization-induced Compatibilization explored through nanoscale visualization10.1021/acsami.4c10829 ↗
49. The behaviour of wine aroma compounds related to structure and barrier properties of virgin, recycled and active PET membranes10.1016/j.memsci.2014.03.066 ↗
50. Desiccant films made of low-density polyethylene with dispersed silica gel—water vapor absorption, permeability (H2O, N2, O2, CO2), and mechanical properties10.3390/ma12142304 ↗
51. Water vapor permeable polyurethane films based on the hyperbranched aminoethers of boric acid10.1039/C9RA05314J ↗
52. Temperature sensitive water vapour permeability and shape memory effect of polyurethane with crystalline reversible phase and hydrophilic segments10.1002/1097-0126(200012)49:12<1714::AID-PI602>3.0.CO;2-K ↗
53. Smart temperature-controlled water vapor permeable polyurethane film10.1016/j.memsci.2007.04.028 ↗
54. Waterborne polyurethane modified with poly(ethylene glycol) macromer for waterproof breathable coating10.1016/j.porgcoat.2016.10.004 ↗
55. Water vapor transport properties of polyurethane films for packaging of respiring foods10.1007/s12393-019-09205-z ↗
56. ASTM E96: Standard Test Methods for Water Vapor Transmission of Materials, (n.d.).
57. How the shape of fillers affects the barrier properties of polymer/non-porous particles nanocomposites: a review10.1016/j.memsci.2018.03.085 ↗