Characterization of new reworkable thermosetting coatings obtained by cationic and anionic curing of DGEBA and some Meldrum acid derivatives
Source abstract
Abstract
Abstract Rare earth metal triflates, BF 3 ·MEA and N,N-dimethylaminopyridine (DMAP) were used as cationic and anionic initiators to cure mixtures of diglycidylether of bisphenol A (DGEBA) and Meldrum acid (2,2-dimethyl-4,6-dioxo-1,3-dioxane) derivatives in several proportions. The copolymerization process led to poly(ether-ester) three-dimensional networks. The linear ester groups in the final materials were evaluated by Fourier transform infrared in the attenuated-total-reflection mode (FTIR/ATR). The shrinkage after curing and the thermal degradability of the materials on varying the lactone structure, comonomer ratio and the initiator used were evaluated and related to the chemical structure of the final network. The addition of lactones to the reactive mixture reduced the shrinkage on curing, which improve the reliability of coatings. The materials obtained were more degradable than conventional epoxy resins due to the tertiary alkyl ester groups incorporated into the network, which facilitates to remove the coatings when the service life is over. The flexibilizing effect of the linear ester introduced into the network by copolymerization with DGEBA was studied by DMTA. Microhardness and adhesion characteristics of these materials, which are interesting characteristics in coating industries, were also evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Photopolymerization techniques and applications · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. González · Eur. Polym. J. · 2008 · 44 · 153510.1016/j.eurpolymj.2008.02.019 ↗
2. Wang · J. Polym. Sci. Part A: Polym. Chem. · 2000 · 38 · 377110.1002/1099-0518(20001015)38:20<3771::AID-POLA80>3.0.CO;2-4 ↗
3. Li · IEEE Trans. Adv. Packaging · 2004 · 27 · 16510.1109/TADVP.2004.824939 ↗
4. Chen · Polymer · 2004 · 45 · 193910.1016/j.polymer.2004.01.011 ↗
5. González · J. Polym. Sci. Part A: Polym. Chem. · 2006 · 44 · 686910.1002/pola.21776 ↗
6. 1999
7. Mas · J. Polym. Sci. Part A: Polym. Chem. · 2003 · 41 · 279410.1002/pola.10826 ↗
8. 1992
9. González · Polym. Degrad. Stab. · 2007 · 92 · 59610.1016/j.polymdegradstab.2007.01.007 ↗
10. González · J. Appl. Polym. Sci. · 2009 · 111 · 180510.1002/app.29211 ↗
11. 1984 · vol. 1
12. Manson · 1986 · vol. 211 · 300
13. Meijerink · Polymer · 1994 · 35 · 17910.1016/0032-3861(94)90069-8 ↗
14. Thomas · Polymer · 2007 · 48 · 169510.1016/j.polymer.2007.01.018 ↗
15. Pascault · 2000 · vol. 1 · 379
16. Mijovic · Macromolecules · 2000 · 33 · 523510.1021/ma991894e ↗
17. Reiw · Rubber Chem. Technol. · 1985 · 58 · 62210.5254/1.3536081 ↗
18. Choi · Macromolecules · 2004 · 37 · 326710.1021/ma0303723 ↗
19. Sue · J. Mater. Sci. · 1992 · 27 · 309810.1007/BF01154125 ↗
20. Meng · Macromolecules · 2006 · 39 · 71110.1021/ma0518499 ↗
21. Maiez-Tribut · Macromolecules · 2007 · 40 · 126810.1021/ma062185l ↗
22. Garcia · J. Polym. Sci. Part A: Polym. Chem. · 2007 · 45 · 231610.1002/pola.21998 ↗
23. González · J. Appl. Polym. Sci. · 2008 · 108 · 122910.1002/app.27758 ↗
24. González · J. Polym. Sci. Part A: Polym. Chem. · 2008 · 46 · 122910.1002/pola.22464 ↗
25. Fernández-Francos · J. Appl. Polym. Sci. · 2008 · 109 · 230410.1002/app.28336 ↗
26. Arasa · Polym. Degrad. Stab. · 2007 · 92 · 221410.1016/j.polymdegradstab.2007.01.037 ↗