Green fabrication of ultraviolet curable epoxy acrylate-silica hybrid coatings
Source abstract
Abstract
Abstract Ultraviolet (UV) curable organic-inorganic hybrid materials have attracted increasing researchers' attention due to the environmental advantages and extensive application potential. In this work, a novel green fabrication of UV curable epoxy acrylate (EA)-silica hybrid coating via a sol-gel process induced by photochemical reaction was presented. The inorganic phase, silica was formed at present of an iodonium salt and tetraethyl orthosilicate, avoiding the application of acid or base in traditional synthesis method. The hybrid coatings were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and thermogravimetric analysis(TGA). Three kinds of silane coupling agents including KH-550, KH-560 and KH-570 were investigated to modify the silica sol. The distribution of SiO 2 in the hybrid coating with KH-570 modification is most homogeneous. TGA results indicate that the hybrid coating with 10% of silica exhibits the most excellent thermal stability. The effects of adding content of silica on the hybrid film's tack free time and hardness were also investigated for the preliminary study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photopolymerization techniques and applications · Silicone and Siloxane Chemistry · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Kinetic study and new applications of UV radiation curing10.1002/marc.200290014 ↗
2. Photoinitiated polymerization: advances, challenges, and opportunities10.1021/ma1007545 ↗
3. A photo-curing study of a pigmented UV-curable alkyd10.1016/j.porgcoat.2011.02.005 ↗
4. UV curable EA-Si hybrid coatings prepared by combination of radical and cationic photopolymerization10.1016/j.porgcoat.2015.03.002 ↗
5. Temperature dependence of the viscosity of epoxy acrylate-tripropylene glycol diacrylate binary mixtures10.1515/epoly-2015-0064 ↗
6. Alkyd artists' paints: do pigments affect the stability of the resin? A TG and DSC study on fast-drying oil colour10.1016/j.polymdegradstab.2014.03.035 ↗
7. Synthesis and properties of UV-curable polyester-based waterborne polyurethane/functionalized silica composites and morphology of their nanostructured films10.1021/ie3000248 ↗
8. Preparation and properties of amino-terminated anionic waterborne-polyurethane–silica hybrid materials through a sol–gel process in the absence of an external catalyst10.1016/j.eurpolymj.2008.06.040 ↗
9. Montmorillonite for clay-polymer nanocomposites: intercalation of tailored compounds based on succinic anhydride, acid and acid salt derivatives—a review10.1016/j.clay.2007.02.006 ↗
10. Facile synthesis of waterborne UV-curable polyurethane/silica nanocomposites and morphology, physical properties of its nanostructured films10.1016/j.porgcoat.2010.09.005 ↗
11. Properties and preparation of thermoplastic polyurethane/silica hybrid using sol–gel process
12. Preparation of polyimide/silica hybrid material by sol–gel process under basic catalysis: comparison with acid conditions10.1002/polb.21522 ↗
13. Photochemical synthesis of silica nanoparticles10.1246/cl.131133 ↗
14. Synthesis and characterization of biodegradable non-toxic poly(ester-urethane-urea)s based on poly(ε-caprolactone) and amino acid derivatives10.1016/j.polymer.2005.12.007 ↗
15. Thermal and mechanical profile of cast films from waterborne polyurethanes based on polyether block copolymers10.1007/s10853-009-3272-7 ↗
16. Thermal degradation of poly (siloxane-urethane) copolymers10.1016/j.polymdegradstab.2008.07.029 ↗