journal article·2010-12

De-painting with high-speed water jets: Paint removal process and substrate surface roughness

H. Teimourian, M.R. Shabgard, A.W. Momber

Progress in Organic Coatings· Volume 69· Issue 4
Publisher page

Abstract

Although the use of water jets for paint removal processes is an accepted procedure, there are just a few studies known which discuss parameter optimization and surface topography in some detail. The paper investigates the effects of water jet kinetic energy and stand-off distance on the mass loss of an organic paint system applied to a steel substrate. It was shown that the material removal process was characterized by a combination of loading intensity and loading frequency. Water drops, formed in the water jet at long stand-off distances, played a notable role. For rather high water jet energies, mass loss exhibited high values at high stand-off distances. For lower water jet energies, however, maximum material loss values appeared at a critical stand-off distance. The transition water jet energy was 600 kJ. It could be shown that the steel substrate topography was not compromised due to secondary surface preparation by water jets. Secondary blast cleaning, however, reduced the profile of the substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. ISO 12944-4 · 1998
2. Momber · 2003
3. Momber · 2008
4. Borkowski · 2007 · 147
5. ISO 8501-4 · 2006
6. ISO 8503-1/5, Preparation of Steel Substrates before Application of Paints and Related Products: Surface Roughness Characteristics of Blast-cleaned Steel Substrates. Parts 1 to 5, ISO, Geneva, Switzerland, 2008.
7. Momber · J. Prot. Coat. Lin. · 2004 · 21 · 44
8. Momber · J. Prot. Coat. Lin. · 2008 · 25 · 43
9. Roper · J. Prot. Coat. Lin. · 2005 · 22 · 52
10. D. Ward, NACE Corrosion 2007 Conference, Paper No. 07001, NACE, Houston, TX, USA, 2007, pp. 1–16.
11. P. LeCalve, J.P. Pautasso, N. LeBozec, Proc. Eurocorr 09, Paper 8369, 6–10 September 2009, Nice, France, pp. 1–9.
12. Louis · 1982 · 217
13. W. Schikorr, Beitrag zum Werkstoffabtrag durch Flüssigkeitsstrahlen hoher Relativgeschwindigkeit, Dissertation, University of Hannover, Hannover, Germany, 1986.
14. Conn · ASTM STP · 1974 · 567 · 239
15. Oka · Wear · 2007 · 263 · 38610.1016/j.wear.2006.11.022 ↗
16. Momber · Wear · 2002 · 46 · 853
17. Shavlovsky · 1972 · 39
18. Momber · Tribol. Int. · 2002 · 35 · 27110.1016/S0301-679X(02)00009-9 ↗
19. Field · Wear · 1999 · 233–235 · 110.1016/S0043-1648(99)00189-1 ↗
20. W. Milchers, Abtrag von Polymeren mit dem reinen Wasserstrahl, Dissertation, University of Hannover, Hannover, Germany, 2001.
21. Haferkamp · 1984 · 119
22. Leu · ASME J. Manuf. Sci. Eng. · 1998 · 120 · 57110.1115/1.2830161 ↗
23. Mabrouki · 1998 · 199
24. Louis · 1999
25. Griffith · 2001
26. Siegmann · 2002 · 1
27. Momber · J. Coat. Technol. Res. · 2005 · 2 · 45310.1007/BF02733888 ↗