journal article·2018-12Open access

Characteristics of dual-curable blocked isocyanate with thermal radical initiator for low-temperature curing of automotive coatings

Kevin Injoe Jung, Beomjin Kim, Dong Geun Lee, Tae-Hee Lee, Seo Yeon Choi, Jin Chul Kim, Seung Man Noh, Young Il Park, Hyun Wook Jung

Abstract

Abstract Dual-curable blocked isocyanate with a thermal radical initiator (BL-Tri-cHD) was designed and synthesized to perform low-temperature curing of automotive coatings. BL-Tri-cHD can simultaneously react with both unsaturated C C double bonds for free-radical polymerization and hydroxyl groups for the urethane reaction in hydroxyl-functionalized urethane methacrylate oligomers (HFUMO) under mild thermal curing conditions. The dual crosslinking behavior and mechanical properties of HFUMO-based coatings using BL-Tri-cHD were compared with those of a commercial blocked isocyanate thermal crosslinker (Desmodur® BL-PL350). The onset temperature for initiating cured by BL-Tri-cHD was about 68 °C, confirming faster crosslinking at relatively lower temperature than BL-PL350, which initiated curing at 140 °C. To quantitatively evaluate the properties of cured coatings, a nano-indentation was made in the surfaces of clearcoat films cured at 150 °C, 130 °C, and 120 °C. Films cured using BL-Tri-cHD and BL-PL350 at 150 °C exhibited similar indentation patterns. The indentation curves for the films with BL-Tri-cHD cured at lower curing temperatures such as 130 °C and 120 °C showed favorable penetration depth profiles similar to the sample cured at 150 °C, whereas the films with BL-PL350 cured below 150 °C had a less dense network structure, resulting in a deeper penetration depth than the sample cured at 150 °C. Therefore, we report that dual-curable BL-Tri-cHD demonstrates promising performance in automotive coating applications and possesses the ability to form highly crosslinked networks, even at low curing temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photopolymerization techniques and applications · Epoxy Resin Curing Processes · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ghassemieh · 2011
2. Cantor · 2008
3. Multi-step cure kinetic model of ultra-thin glass fiber epoxy prepreg exhibiting both autocatalytic and diffusion-controlled regimes under isothermal and dynamic-heating conditions10.1007/s13367-017-0017-z ↗
4. Effect of molecular weight of polyurethane toughening agent on adhesive strength and rheological characteristics of automotive structural adhesives10.1016/j.ijadhadh.2016.12.006 ↗
5. Amine-functional curatives for low temperature cure epoxy coatings
6. The development of a low temperature cure modified epoxy resin system for aerospace composites10.1016/S1359-835X(02)00115-X ↗
7. Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction10.1016/j.ijadhadh.2011.09.001 ↗
8. Exotherm control in the thermal polymerization of nona-ethylene glycol dimethacrylate (NEGDM) using a dual radical initiator system10.1016/S0032-3861(02)00766-8 ↗
9. Blocked isocyanates III: part A. Mechanisms and chemistry10.1016/S0300-9440(99)00042-9 ↗
10. Blocked isocyanates III: part B: uses and applications of blocked isocyanates10.1016/S0300-9440(00)00164-8 ↗
11. Research on the thermal decomposition reaction kinetics and mechanism of pyridinol-blocked isophorone diisocyanate10.3390/ma9020110 ↗
12. Correlation between thermal dissociation and chemical structure of blocked isocyanates10.1016/0033-0655(93)80030-E ↗
13. Pyrazoles–a novel class of blocking agents for isocyanates10.1002/pola.1994.080320414 ↗
14. Novel curing agents: thermal radical initiators as viable alternatives to peroxides10.1016/j.porgcoat.2007.07.034 ↗
15. P. Nesvadba, L.B. Folger, A. Carroy, M. Faller, B. Spony, O-imino-iso-urea compounds and polymerizable compositions thereof, U.S. Patent No. 8,664,288 (2014).
16. Thermal radical initiator derivatives based on O-imino-isourea: synthesis, polymerization, and characterization10.1002/pola.28244 ↗
17. The effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats10.1007/s11998-014-9619-2 ↗
18. Rheology and curing characteristics of dual-curable clearcoats with hydroxyl functionalized urethane methacrylate oligomer: effect of blocked isocyanate thermal crosslinkers10.1007/s13367-014-0016-2 ↗
19. Dual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats10.1016/j.porgcoat.2012.01.002 ↗
20. Effect of colloidal fillers on the cross-linking of a UV-curable polymer: gel point rheology and the Winter-Chambon criterion10.1021/ma010281a ↗
21. Analysis of scratch characteristics of automotive clearcoats containing silane modified blocked isocyanates via carwash and nano-scratch tests10.1016/j.porgcoat.2011.12.009 ↗
22. A study on the curing behavior of silicone/polyurethane/epoxy blends by rigid-body pendulum rheometer10.1080/03602550600723381 ↗
23. Thermal imidization behavior of aromatic polyimides by rigid‐body pendulum rheometer10.1002/app.27996 ↗
24. Silicone/polypropylene oxide-polyethylene oxide copolymer/clay composites (i)-curing behavior, intermolecular interaction and thermomechanical properties10.1007/s10965-005-1878-2 ↗
25. Synthesis and properties of optically clear silicone resin/epoxy resin hybrids10.1002/pi.3189 ↗
26. Advanced semi-interpenetrating polymer network gel electrolyte for rechargeable lithium batteries10.1016/j.electacta.2014.11.176 ↗
27. Fluorescence detection of microcapsule-type self-healing, based on aggregation-induced emission10.1002/marc.201600657 ↗
28. Fischer-Cripps · 2000
29. Mechanical properties of Co-based amorphous ribbons
30. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation10.1557/JMR.1992.0613 ↗
31. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
32. Nano-indentation of polymeric surfaces10.1088/0022-3727/31/19/006 ↗
33. Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation10.1016/j.ijsolstr.2004.07.018 ↗
34. Effect of addition of hydrophobic nano silica on viscoelastic properties and scratch resistance of an acrylic/melamine automotive clearcoat10.1016/j.triboint.2009.10.008 ↗
35. Dynamic urea bond for the design of reversible and self-healing polymers10.1038/ncomms4218 ↗
36. Urea dissociation. Measure of steric hindrance in secondary amines10.1021/jo00930a039 ↗
37. Rheological study of crosslinking and gelation in chlorobutyl elastomer systems10.1016/S0032-3861(96)00446-6 ↗
38. Creating polymer templates and their use in the in-situ synthesis of biodegradable composite networks10.1016/j.polymer.2014.03.060 ↗
39. Self-assembled polymer nanocomposites and their networks10.1002/app.41111 ↗