The effect of HMMM crosslinker content on the thermal-mechanical properties of polyester coil coatings
Source abstract
Abstract
Abstract The thermosetting polyester-based coatings crosslinked with hexa(methylmethoxy)melamine (HMMM) used for coil coating sheet metal experience large deformations when formed into architectural cladding and white goods. Cracking of the 20-μm-thick coatings must not occur during forming, to prevent corrosion of the steel substrate, so the relationship between the composition and the thermal-mechanical properties is critical to develop highly formable and durable coatings, and to choose suitable forming conditions. Free films of coatings with 5% to 30% crosslinker content have been analysed. Dynamic mechanical analysis (DMA) showed that the glass transition temperature (Tg) and crosslink density increase with crosslinker content. Differential scanning calorimetry (DSC) has been used to measure the Tg from the thermal response, based solely on the chemical structure, and agrees well with the DMA. Tensile tests were performed at temperatures as a function of DSC Tg (Tg − 40 °C to Tg + 50 °C). There was little variation in Young’s modulus and strain to failure in the glassy region where the intermolecular forces dominate, but in the rubbery region governed by the covalent bonds a lower crosslinker content gave lower values. This indicates that the failure mechanism undergoes a transition with increasing temperature from being controlled by the brittle fracture stress to the yield stress. The addition of TiO2 pigment increased the modulus and apparent yield stress at low temperatures in the glassy region, and increased the strain to failure and failure stress in the rubbery region. Failure envelopes, normalising the tensile data with the DSC Tg and the crosslink density, show the dependence on crosslinker content and pigmentation. This allows the behaviour of coatings to be predicted from their structure, and enhanced coatings to be developed based on the required mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Sander · 2014
2. Coil coating: the advanced finishing technology10.4028/www.scientific.net/KEM.710.181 ↗
3. Zion Market Research · 2018
4. British Standards Institution · 2007
5. British Standards Institution · 2003
6. Quantification of coating surface strains in Erichsen cupping tests10.1007/s10853-019-03392-0 ↗
7. Coil coating - the continuous coating of metal strip
8. Coil and sheet coating10.1016/S0026-0576(00)80410-9 ↗
9. Basic resins for coil coatings
10. A modelling study of the visco-elastic behaviour of polyester-based coil coatings10.1016/j.porgcoat.2013.06.010 ↗
11. Controlled relative humidity testing for the characterisation of the brittle-tough and glass transition temperatures of coil coating paint films10.1016/j.porgcoat.2004.08.002 ↗
12. Controlled temperature and relative humidity dynamic mechanical analysis of paint films10.1023/A:1025133508109 ↗
13. An essential work of fracture study of the toughness of thermoset polyester coatings10.1016/j.porgcoat.2014.08.009 ↗
14. A MARTINI coarse-grained model of a thermoset polyester coating10.1021/ma200788a ↗
15. Mechanical behaviour of coating films10.1016/0300-9440(80)80004-X ↗
16. Determination of the fracture toughness of polymeric films by the essential work method10.1016/0032-3861(94)90840-0 ↗
17. A comparison of how well two different models of thermo-setting polymers predict their thermo-mechanical aspects10.1002/masy.201600196 ↗
18. Effect of pigmentation on organic coating characteristics10.1016/j.porgcoat.2004.03.002 ↗
19. An investigation of the effect of pigment on the degradation of a naturally weathered polyester coating10.1007/s11998-010-9305-y ↗
20. Physical ageing of organic coatings10.1016/S0300-9440(03)00037-7 ↗
21. Weathering of coil-coatings UV radiation and thermal effects10.3989/revmetalm.2003.v39.iExtra.1115 ↗
22. Ten-year exterior durability test results compared to various accelerated weathering devices: joint study between ASTM International and National Coil Coatings Association10.1016/j.porgcoat.2012.10.018 ↗
23. Effects of mechanical deformation on the protection properties of coil coating products10.1016/S0010-938X(99)00086-4 ↗
24. On the reduction of the gloss property of organic coated sheet metal after forming10.1007/s11740-010-0262-1 ↗
25. Forming-induced gloss reduction of coil coated sheets for white goods10.1016/j.proeng.2017.04.025 ↗
26. Coil coating test methods and how some radiation curable coatings fare
27. Effects of mechanical properties of paint film on the forming of pre-painted steel sheets10.1016/S0300-9440(01)00199-0 ↗
28. Mechanical properties of coil coating evaluated with dynamic mechanical analysis in Daul cantilever10.4028/www.scientific.net/KEM.353-358.1729 ↗
29. Paint layer thermomechanical properties determined by in situ dynamic mechanical analysis in 3-point bending10.1016/j.porgcoat.2003.09.001 ↗
30. British Standards Institution · 2016
31. Chapter 1 - differential scanning calorimetry
32. British Standards Institution · 2014
33. Comparisons of complex modulus provided by different DMA10.1016/j.polymertesting.2018.10.034 ↗
34. Strain rate and temperature dependence of the mechanical properties of polymers: a universal time-temperature superposition principle10.1063/1.5031114 ↗
35. British Standards Institution · 2012
36. An investigation on the melamine self-condensation in polyester/melamine organic coating10.1016/j.porgcoat.2010.07.011 ↗
37. Dynamic mechanical analysis in the analysis of polymers and rubbers
38. DMA analysis of the structure of crosslinker poly(methyl methacrylate)s
39. Calculation of crosslink density in short chain networks10.1016/S0300-9440(97)00081-7 ↗
40. Structure/property relationships of thermoset coatings
41. Thermal characterization of polyester–melamine coating matrices prepared under nonisothermal conditions10.1002/pola.10698 ↗
42. Development and optimisation of focused ion beam/scanning electron microscopy as a technique to investigate cross-sections of organic coatings10.1016/j.porgcoat.2017.02.003 ↗
43. Nielsen · 1994
44. Rheokinetical behvaiour of melamine-formaldehyde resins10.1002/pen.11595 ↗
45. Matthews · 1999
46. The dynamic mechanical properties of thermosetting acrylic coatings
47. Giannakopoulos · 2012
48. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
49. The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles10.1016/j.polymer.2010.10.048 ↗
50. Stress distribution around inclusions, interaction, and mechanical properties of particulate-filled composites10.1007/BF00360726 ↗
51. Fracture of amorphous polymers10.5254/1.3539115 ↗