Surfactant-free latexes as binders in paint applications
Source abstract
Abstract
The leakage of surfactant from waterborne coatings is a matter of concern. Therefore, there is a strong interest in developing surfactant-free polymer dispersion as binders for waterborne coatings. This will accelerate the substitution of solventborne binders by the more environmentally friendly waterborne latexes. However, as the performance of the coating depends on the interaction of the latex with pigments and fillers and this interaction is controlled by the composition of the surface of the polymer particles, it is an open question if the surfactant-free latexes are adequate for coating applications. In this work, surfactant-free latexes synthesized under industrial-like conditions using sodium styrene sulfonate (NaSS) to provide stability to the latex were used to formulate exterior paints and their performance compared with that of a commercial latex binder. It was found that for most of the application properties, the paints based on the NaSS binders present improvements with respect to the surfactant stabilized commercial binder.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Polymer Synthesis and Characterization · Polymer composites and self-healing · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. G. Koch in Trends in Oil and Gas Corrosion Research and Technology, a.M. El-Sherik Ed. Woodhead Publishing, 2017.
2. Keddie · 2010
3. Structure and properties of multiphase particles and their impact on the performance of architectural coatings, Prog10.1016/S0300-9440(00)00136-3 ↗
4. New waterborne acrylic binders for zero VOC paints10.1007/s11998-007-9036-x ↗
5. Knowledge-based production of waterborne hybrid polymer materials10.1002/mren.201500042 ↗
6. The influence of particle morphology on the structure and mechanical properties of films cast from hybrid latexes10.1016/j.porgcoat.2019.01.015 ↗
7. Soft core–hard shell latex particles for mechanically strong VOC-free polymer films10.1002/app.47608 ↗
8. Nanocellulose in emulsions and heterogeneous water-based polymer systems: a review
9. High solid acrylic–melamine latexes with tunable crosslinking capability, Macromol React
10. Water-resistant latex coatings: tuning of properties by polymerizable surfactant, covalent crosslinking and nanostructured ZnO additive10.3390/coatings11030347 ↗
11. Waterborne coating binders based on self-crosslinking acrylic latex with embedded inorganic nanoparticles: a comparison of nanostructured ZnO and MgO as crosslink density enhancing agents10.3390/coatings10040339 ↗
12. Water sensitivity of fluorine-containing polyacrylate latex coatings: effects of crosslinking and ambient drying conditions10.1016/j.porgcoat.2018.03.016 ↗
13. Dynamic micromechanical investigations into particle/particle interfaces in latex films10.1016/0032-3861(92)90622-4 ↗
14. Hydrogen bond-directed formation of stiff polymer films using naturally occurring polyphenols10.1021/acs.macromol.9b01694 ↗
15. Supramolecularly reinforced films from polyurethane–urea dispersions containing the tris-urea motif10.1021/acsapm.0c00670 ↗
16. Non-migratory surfactant overcomes drawbacks of convencional products
17. Reactive surfactants in heterophase polymerization10.1002/(SICI)1521-4044(199812)49:12<671::AID-APOL671>3.0.CO;2-L ↗
18. Reactive surfactants in heterophase polymerization. 9. Optimum surfmer behavior in emulsion polymerization10.1021/ma9701494 ↗
19. Effect of carboxylic acid monomer type on particle nucleation and growth in emulsifier-free emulsion copolymerization of styrene-carboxylic acid monomer10.1295/polymj.PJ2006246 ↗
20. Emulsifier-free emulsion polymerization with ionic comonome10.1002/pol.1976.170140901 ↗
21. Emulsifier-free emulsion copolymerization of styrene with two different amino-containing cationic monomers. I. Kinetic studies10.1002/(SICI)1097-4628(19970919)65:12<2315::AID-APP6>3.0.CO;2-C ↗
22. Fundamentals of chemical incorporation of ionicmonomers onto polymer colloids: paving the way for surfactant-free waterborne dispersions10.1039/C6RA07486C ↗
23. Effect of ionic monomer concentration on latex and film properties for surfactant-free high solids content polymer dispersions10.1016/j.eurpolymj.2017.06.029 ↗
24. Surfactant-free high solids content polymer dispersions10.1016/j.polymer.2017.04.014 ↗
25. Resene Paints
26. Ensuring good paint performance
27. Hydroplasticization of latex films with varying methacrylic acid content10.1016/j.polymer.2019.01.074 ↗
28. Tracking hydroplasticization by dsc: movement of water domains bound to poly(meth)acrylates during latex film formation10.3390/polym12112500 ↗
29. VOC formation during monomer removal by post-polymerization10.1016/S0032-3861(00)00377-3 ↗
30. Improving water sensitivity in acrylic films using surfmers10.1021/la047631h ↗
31. I.F.A. Mariz, J.C. de la Cal, J.R. Leiza, Control of particle size distribution for the synthesis of small particle size high solids content latexes, Polymer 51 (2010) 4044–4052.10.1016/j.polymer.2010.07.001 ↗
32. Efflorescence: cause and control10.70803/001c.142846 ↗
33. Reactive surfactants in heterophase polymerization: colloidal properties, film-water absorption, and surfactant exudation10.1002/pola.10385 ↗
34. Effect of itaconic acid on the wet scrub resistance of highly pigmented paints for architectural coatings10.1007/s11998-010-9317-7 ↗
35. Scrub resistance of highly pigmented paints: a study on abrasion mechanisms of different scrub techniques10.1016/S0300-9440(01)00222-3 ↗