journal article·2020-04

Investigating an effective model to estimate the water diffusion coefficient of a hybrid polymer-oxide coating

X. Chen, S.F. Wen, T. Feng, X. Yuan, Z.F. Yue

Publisher page

Abstract

Abstract An effective model was developed to predict the water diffusion coefficient in a hybrid polymer-oxide coating. The composite coating consists of microarc oxidation (MAO) coating and silicone-epoxy (SE) coating. The performance of the SE/MAO coating and MAO-coated samples were studied by adhesion tests, X-ray photoemission spectroscopy (XPS), Fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The electrochemical impedance spectroscopy (EIS) was used to study the water transport behavior of the coatings. The diffusion coefficient (Dexp) obtained from the EIS experimental measurement was compared with the effective diffusivity (Deff) predicted by the mathematical model based upon the Ohm’s law and the model based on the effective validation model (EVM) which considers the water concentration jump at the SE and MAO coating interface The results demonstrated that the noncontinuity of the water concentration at the SE/MAO interface resulted in a difference between the diffusion coefficient obtained by the EIS results and mathematical model. The effective diffusion (Deff) coefficient derived from the EVM (6.47 × 10−12 cm2·s−1) was similar to the Dexp obtained by the EIS experimental method (7.22 × 10−12 cm2·s−1).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. TiO2 coated multi-wall carbon nanotube as a corrosion inhibitor for improving the corrosion resistance of BTESPT coatings10.1016/j.matchemphys.2016.05.012 ↗
2. Composition, structure and morphology of hybrid acrylate-based sol–gel coatings containing Si and Zr composed for protective applications10.1016/j.surfcoat.2015.12.036 ↗
3. Corrosion properties of UV cured hybrid sol-gel coatings on AA7075-T6 determined under simulated aircraft conditions10.1149/2.1091409jes ↗
4. Combined EIS and FTIR-ATR study of water uptake and diffusion in polymer films on semiconducting electrodes10.1016/j.electacta.2007.07.003 ↗
5. An FTIR/ATR in situ study of sorption and transport in corrosion protective organic coatings - paper 2. The effects of temperature and isotopic dilution10.1016/j.porgcoat.2003.10.007 ↗
6. Determination of water uptake in organic coatings deposited on 2024 aluminium alloy: comparison between impedance measurements and gravimetry10.1016/j.porgcoat.2017.07.004 ↗
7. Water transportation through organic coatings: correlation between electrochemical impedance measurements, gravimetry, and water vapor permeability10.1007/s11998-011-9376-4 ↗
8. Monitoring degradation of single and multilayer organic coatings -Ⅰ. Absorption and transport of water: theoretical analysis and methods10.1149/1.1838881 ↗
9. Water permeability of organic/inorganic hybrid coatings prepared by sol-gel method: a comparison between gravimetric and capacitance measurements and evaluation of non-fickian sorption models10.1016/j.corsci.2004.06.028 ↗
10. Near-infrared spectroscopy for the quantitative determination of mass transfer and water absorption kinetics by a polymer solution10.1002/polb.22074 ↗
11. Comparison of water vapour transmission rates of monolayer films determined by water vapour sorption and permeation experiments10.1016/j.fpsl.2018.06.004 ↗
12. Water diffusion in polymer coatings containing water-trapping particles. Part 2. Experimental verification of the mathematical model10.1016/j.porgcoat.2012.05.008 ↗
13. Study of impedance model and water transport behavior of modified solvent-free epoxy anti-corrosion coating by EIS Ⅱ10.1007/s11998-016-9810-8 ↗
14. Evaluating water transport through high solid polyurethane coating using the eis method10.1007/s11998-009-9173-5 ↗
15. Effect of pvc on the diffusion behaviour of water through alkyd coatings10.1016/S0010-938X(02)00061-6 ↗
16. On conversion coating treatments to replace chromating for Al alloys: recent developments and possible future directions10.3103/S1067821212020071 ↗
17. Increasing thickness and protective properties of PEO-coatings on aluminum alloy10.1016/j.surfcoat.2017.11.025 ↗
18. Initial stages of multi-phased aluminium alloys anodizing by MAO: micro-arc conditions and electrochemical behaviour10.1007/s10008-015-2935-3 ↗
19. An investigation of the coating/substrate interface of plasma electrolytic oxidation coated aluminum10.1016/j.surfcoat.2015.08.050 ↗
20. Microstructure and 3D microtomographic characterization of porosity of MAO surface layers formed on aluminium and 2214-T6 alloy10.1016/j.surfcoat.2009.01.014 ↗
21. Micro-structures and growth mechanisms of plasma electrolytic oxidation coatings on aluminium at different current densities10.1016/j.surfcoat.2017.04.064 ↗
22. Corrosion, erosion and erosion-corrosion performance of plasma electrolytic oxidation (PEO) deposited Al2O3 coatings10.1016/j.surfcoat.2004.09.038 ↗
23. The effects of different sealing techniques for anodic film of Al-12.7Si-0.7Mg alloys10.20964/2016.06.85 ↗
24. Effects of inorganic sealant and brief heat treatments on corrosion behavior of plasma sprayed Cr2O3-Al2O3 composite ceramic coatings10.1016/j.surfcoat.2015.06.045 ↗
25. Sealing of anodized aluminum with phytic acid solution10.1016/j.surfcoat.2015.12.024 ↗
26. Cerium conversion coating and sol–gel multilayer system for corrosion protection of AA606010.1016/j.surfcoat.2015.12.059 ↗
27. Sol-gel sealing characteristics for corrosion resistance of anodised aluminium10.1016/j.surfcoat.2013.07.018 ↗
28. Preparation and characterization of HA sol–gel coating on MAO coated AZ31 alloy10.1016/j.surfcoat.2015.11.056 ↗
29. Effect of mixture ratio on water uptake and corrosion performance of silicone-epoxy hybrid coatings coated 2024 Al-alloy10.1016/j.porgcoat.2014.09.009 ↗
30. A sulfuric acid surface treatment of mild steel for enhancing the protective properties of an organosilane coating10.1016/j.porgcoat.2016.10.033 ↗
31. Silane adhesion mechanism in dental applications and surface treatments: a review
32. Effect of phosphate-silane pretreatment on the corrosion resistance and adhesive-bonded performance of the AZ31 magnesium alloys10.1016/j.porgcoat.2013.01.010 ↗
33. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges10.1016/j.pmatsci.2013.08.002 ↗
34. Electrochemical and long term corrosion behavior of Mn and Mo oxyanions sealed anodic oxide surface developed on aerospace aluminum alloy (AA2024)10.1016/j.surfcoat.2016.01.005 ↗
35. Microarc oxidation coating combined with surface pore-sealing treatment enhances corrosion fatigue performance of 7075-T7351 Al alloy in different media
36. An ohm’s law analogy for the effective diffusivity of composite media10.1016/j.physa.2015.12.021 ↗
37. Surface-analysis of oxidized aluminum .1. Hydration of Al2O3 and decomposition of Al(OH)3 in a vacuum as studied by ESCA10.1002/sia.740210504 ↗
38. Investigating the effect of SiO2-graphene oxide hybrid as inorganic nanofiller on corrosion protection properties of epoxy coatings10.1016/j.surfcoat.2017.01.013 ↗
39. Comparative study of in situ polymerized waterborne polyurethane/nano-silica composites and polyethersiloxanediol-modified polyurethane10.1177/0892705715584434 ↗
40. Composition and thickness of non-functional organosilane films coated on aluminium studied by means of infra-red spectroscopic ellipsometry10.1016/S0040-6090(03)00886-1 ↗
41. Investigation of mao coating growth mechanism on aluminum alloy by two-step oxidation method10.1016/j.apsusc.2013.11.159 ↗
42. Suggested mechanism for the MAO ceramic coating on aluminium substrates using bipolar current mode in the alkaline silicate electrolytes10.1016/j.apsusc.2014.04.120 ↗
43. X-ray photoelectron spectroscopic measurement and chemical characteristics of silica, alumina and silica-alumina10.2116/bunsekikagaku.40.11_673 ↗
44. ESCA studies of aluminophosphate molecular-sieves10.1021/j100153a045 ↗
45. A sol-bath-gel approach to prepare hybrid coating for corrosion protection of aluminum alloy10.1016/j.surfcoat.2015.08.032 ↗
46. Pore surface characteristics of macroporous silica-gels prepared from polymer-containing solution10.1016/0022-3093(91)90009-U ↗
47. An XPS analysis of different SiO2 modifications employing a C 1s as well as an Au 4f7/2 static charge reference10.1002/sia.740180110 ↗
48. Surface-area stability of aluminas10.1016/0021-9517(90)90173-H ↗
49. Effect of phytic acid on the corrosion inhibition of composite film coated on Mg-Gd-Y alloy10.1016/j.corsci.2013.06.036 ↗
50. The effecr of NaCl concentration on the corrosion behavior of aluminum-containing iron10.1016/0010-938X(94)90132-5 ↗
51. Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy10.1016/j.corsci.2010.04.022 ↗
52. Electrochemical corrosion behavior of modified mao film on magnesium alloy AZ31 irradiated by high-intensity pulsed ion beam10.1016/j.surfcoat.2012.06.053 ↗
53. Studies of the impedance models and water transport behaviors of cathodically polarized coating10.1016/j.electacta.2011.04.068 ↗
54. A reactive transport model for marcellus shale weathering10.1016/j.gca.2017.08.011 ↗
55. A study of corrosion initiation on polyimide coatings10.1016/0010-938X(92)90131-L ↗
56. Calculations of the effective diffusion coefficient for inhomogeneous media10.1016/S0022-3697(01)00159-7 ↗
57. Study of barrier property of composite film coated on Mg-Gd-Y alloy by water diffusion10.1149/2.004308eel ↗
58. Effects of porosity on the electrical characteristics of current-limiting BaTiO3-based positive-temperature-coefficient (PTC) ceramic thermistors coated with electroless nickel-phosphorous electrode10.1016/j.sna.2003.09.039 ↗
59. Water uptake of a sandwich-structured composite film coated on a Mg-Gd-Y alloy: experiments and model validation10.1149/2.027404jes ↗
60. The protective and adhesion properties of silicone-epoxy hybrid coatings on 2024 al-alloy with a silane film as pretreatment10.1016/j.corsci.2015.11.035 ↗