Bio-based acrylated epoxidized jatropha oil incorporated with graphene nanoplatelets in the assessment of corrosion resistance coating
Source abstract
Abstract
Vegetable oil has been extensively investigated as a precursor to the eco-friendly coating as an alternative to petrochemical-based resources due to its lower carbon footprint properties. In view of this, jatropha oil (JO), a type of non-edible oil, has received significant attention in this field. The present study was undertaken to utilize acrylated epoxidized jatropha oil (AEJO) resin and to evaluate the anti-corrosion performance with the addition of graphene nanoplatelets (GNP). AEJO-GNP nanocomposites coatings were obtained after three passes of ultraviolet (UV) irradiation. The corrosion protection of all nanocomposites coatings was investigated by electrochemical measurements. The results showed that the corrosion performance of AEJO-GNP nanocomposites coatings improved from the blank coating. Among all coatings tested, AEJO-0.5 wt% GNP exhibited the strongest barrier property and maximum performance in corrosion protection. The result was supported by water contact angle and pull-off adhesion tests. In addition, the highest pull-off adhesion strength for GNP fillers added coatings was established at 0.5 wt% of GNP. High hydrophobicity and pull-off adhesion strength coatings provided a physical barrier that created a tortuosity pathway for corrosive electrolytes to reach the metal surface and thus showed better anti-corrosion resistance. Thus, nanocomposites coatings with 0.5 wt% GNP exhibited the best anti-corrosive efficacy and surface coating property.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Lubricants and Their Additives · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A review of corrosion in aircraft structures and graphene-based sensors for advanced corrosion monitoring10.3390/s21092908 ↗
2. Bio-based waterborne polyurethane/carbon dot nanocomposite as a surface coating material10.1016/j.porgcoat.2015.10.025 ↗
3. A novel multi-functional bio-based reactive diluent derived from cardanol for high bio-content UV-curable coatings application
4. Linseed oil polyol/ZnO bionanocomposite towards mechanically robust, thermally stable, hydrophobic coatings: a novel synergistic approach utilising a sustainable resource10.1039/C5RA03262H ↗
5. Recent advances in vegetable oil-based polymers and their composites10.1016/j.progpolymsci.2016.12.009 ↗
6. Physico-chemical, thermal, and electrochemical analysis of solid polymer electrolyte from vegetable oil-based polyurethane10.3390/polym13010132 ↗
7. Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide10.1016/j.corsci.2015.11.033 ↗
8. Synthesis and characterization of hybrid materials based on graphene oxide and silica nanoparticles and their effect on the corrosion protection properties of epoxy resin coatings10.1080/01694243.2019.1571660 ↗
9. Improving environmental protection of waterborne polyurethane coating by adding TiO2/polyaniline/HNT/CNT nanocomposite10.1007/s11356-019-07333-x ↗
10. Enhanced corrosion protection of Epoxy/ZnO-NiO nanocomposite coatings on steel10.3390/coatings10080783 ↗
11. Preparation of α-Fe2O3@TA@GO composite material and its anticorrosion performance in epoxy modified acrylic resin coatings
12. Carbon dots: a new type of carbon-based nanomaterial with wide applications10.1021/acscentsci.0c01306 ↗
13. Continuous and integrated PEDOT@bacterial cellulose/CNT hybrid helical fiber with “reinforced cement-sand” structure for self-stretchable solid supercapacitor10.1016/j.cej.2021.131904 ↗
14. Enhanced power generation, faster transient response and longer durability of HT-PEMFC using composite polybenzimidazole electrolyte membrane with optimum rGO loading10.1016/j.ijhydene.2020.04.124 ↗
15. Ultralight and hyperelastic nanofiber-reinforced MXene–graphene aerogel for high-performance piezoresistive sensor10.1002/admt.202100394 ↗
16. Enhanced interfacial characteristics in PLA/graphene composites through numerically-designed interface treatment10.1016/j.apsusc.2019.144150 ↗
17. Super tough graphene oxide reinforced polyetheretherketone for potential hard tissue repair applications10.1016/j.compscitech.2019.02.028 ↗
18. Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites10.1007/s10853-014-8665-6 ↗
19. Effects of tip sonication parameters on liquid phase exfoliation of graphite into graphene nanoplatelets10.1186/s11671-018-2648-5 ↗
20. Electrochemical and anticorrosion behavior of functionalized graphite nanoplatelets epoxy coating10.1016/j.jiec.2014.01.011 ↗
21. Improvement of anticorrosion coating properties in bio-based polymer epoxy acrylate incorporated with nano zinc oxide particles10.1021/acs.iecr.9b05639 ↗
22. The evaluation of mechanical properties graphene nanoplatelets reinforced polylactic acid nanocomposites10.1016/j.matpr.2021.01.501 ↗
23. Mechanical and thermal properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites10.1002/pc.22863 ↗
24. Polylactic acid/graphene nanocomposite consolidated by SPS technique10.1016/j.jmrt.2020.08.064 ↗
25. Structural, mechanical, and dielectric properties of polyvinylchloride/graphene nano platelets composites10.1080/1023666X.2020.1845493 ↗
26. Development and evaluation of graphite nanoplate (GNP)-based phase change material for energy storage applications10.1002/er.3287 ↗
27. Effect of Zr/Gnp hybrid filler on thermal and ablation properties of carbon-epoxy composites10.1002/pc.25854 ↗
28. How are the thermal properties of polypropylene/graphene nanoplatelet composites affected by polymer chain configuration and size of nanofiller?10.1016/j.matdes.2019.108068 ↗
29. Thermal properties and characterization of palmitic acid/nano silicon dioxide/graphene nanoplatelet for thermal energy storage10.1002/er.5311 ↗
30. Melt crystallization and thermal properties of graphene platelets (GNPs) modified recycled polyethylene terephthalate (RPET) composites: the filler network analysis10.1016/j.polymertesting.2019.04.016 ↗
31. Characterization of electrical heating textile coated by graphene nanoplatelets/PVDF-HFP composite with various high graphene nanoplatelet contents10.3390/polym11050928 ↗
32. Fabrication of ZnO/rGO and ZnO/MWCNT nanohybrids to reinforce the anticorrosion performance of polyurethane coating10.1016/j.flatc.2020.100208 ↗
33. Anticorrosive behavior of a zinc-rich epoxy coating containing sulfonated polyaniline in 3.5% NaCl solution10.1039/C8RA00845K ↗
34. Enhancement of barrier and anti-corrosive performance of zinc-rich epoxy coatings using nano-silica/graphene oxide hybrid10.1515/corrrev-2020-0034 ↗
35. A novel hydroxyl epoxy phosphate monomer enhancing the anticorrosive performance of waterborne graphene/epoxy coatings10.1016/j.apsusc.2017.08.224 ↗
36. New UV-curable anticorrosion coatings from vegetable oils10.1002/mame.202100029 ↗
37. Mechanical, electrochemical, and durability behavior of graphene nano-platelet loaded epoxy-resin composite coatings10.1016/j.compositesb.2019.107103 ↗
38. Effect of reduced graphene oxide nanoparticles as anticorrosion material on mild steel substrate10.1088/1742-6596/2070/1/012192 ↗
39. Mechanical, adhesion and corrosive properties of unsaturated polyester-graphene coating treated with silane coupling agent on metal substrate10.1063/5.0044097 ↗
40. Superhydrophobic surfaces developed by mimicking hierarchical surface morphology of lotus leaf10.3390/molecules19044256 ↗
41. Comparative study of corrosion properties of different graphene nanoplate/epoxy composite coatings for enhanced surface barrier protection10.3390/coatings11030285 ↗
42. Studies on greener anticorrosive coating to steel rebars with waterborne polyurethane binders10.1007/s40996-020-00353-5 ↗
43. Assessment of corrosion protection and performance of bio-based polyurethane acrylate incorporated with nano zinc oxide coating10.1016/j.polymertesting.2020.106526 ↗
44. Simultaneously improving the anticorrosion and antiscratch performance of epoxy coatings with graphite fluoride via large-scale preparation10.1021/acs.iecr.8b04405 ↗