Direct cerium-doped hybrid sol-gel sealing of TSA-anodized AA2024-T3 for corrosion protection
Source abstract
Abstract
The corrosion protection performance of the AA2024-T3 alloy, anodized in a tartaric‑sulfuric acid medium and subsequently sealed with a hybrid sol–gel coating, was evaluated with and without the incorporation of Ce 3+ species into the hydrolysis solution. Structural and surface analyses confirmed that the presence of cerium contributed to the formation of thicker, more compact, and hydrophobic coatings. Electrochemical impedance spectroscopy demonstrated that the Ce-modified films significantly increased the system's durability, extending the time to failure by approximately 2.5 times compared to the Ce-free counterparts. Local electrochemical impedance spectroscopy was used to explore potential self-healing responses; however, the results were inconclusive, likely due to the gradual leaching of the inhibitor species over time. Despite this, the strategy of Ce incorporation into the sol-gel network proved to be effective in enhancing long-term barrier properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Advances in aluminium alloy products for structural applications in transportation
2. Influence of the anion specificity on the electrochemical corrosion of anodized aluminum substrates10.1016/j.electacta.2009.12.063 ↗
3. Surface and interface analysis of poly-hydroxyethylmethacrylate-coated anodic aluminium oxide membranes10.1016/j.apsusc.2013.11.042 ↗
4. Influence of an anodized layer on the adhesion and surface protective performance of organic coatings on AA2024 aerospace Al alloy
5. Interaction of ester functional groups with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy10.1021/la049456a ↗
6. Role of hexavalent chromium in the inhibition of corrosion of aluminum alloys10.1016/S0257-8972(01)01099-4 ↗
7. A study on the self-sealing process of anodic films on aluminum by EIS10.1016/j.surfcoat.2005.10.031 ↗
8. (Occupational Safety and HealthAdministration) OSHA, Hexavalent Chromium · 2009
9. REACH · 2019
10. BOEING · 2004
11. Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications: a review10.1007/s11705-017-1641-3 ↗
12. Introducing more eco-efficient chemical tratmens for aircraft structure - towards a chromate-free AIRBUS
13. Effect of postreatment on the corrosion behaviour of tartaric-sulphuric anodic films10.1016/j.electacta.2009.03.083 ↗
14. Role of tartaric acid on the anodizing and corrosion behavior of AA 2024 T3 aluminum alloy10.1149/1.3077602 ↗
15. Effect of acid traces on hydrothermal sealing of anodising layers on 2024 aluminium alloy10.1016/j.electacta.2010.07.089 ↗
16. Effect of ethylene glycol dimethacrylate on VOC reduction, rheological, mechanical and anticorrosion properties of a hybrid sol-gel coating on AA2024-T3 and sulfuric acid anodized AA2024-T3
17. An investigation into the role of the acid catalyst on the structure and anticorrosion properties of hybrid sol-gel coatings10.1016/j.tsf.2021.138703 ↗
18. Inorganic/organic hybrid coatings for aircraft aluminum alloy substrates10.1016/S0300-9440(01)00133-3 ↗
19. Corrosion behaviour and chemical stability of transparent hybrid sol-gel coatings deposited on aluminium in acidic and alkaline solutions10.1016/j.porgcoat.2018.02.025 ↗
20. Influence of sol-gel application conditions on metallic substrate for optical applications10.1179/147842210X12732285051357 ↗
21. Effect of the catalyst concentration, the immersion time and the aging time on the morphology, composition and corrosion performance of TEOS-GPTMS sol-gel coatings deposited on the AZ31 magnesium alloy10.1016/j.surfcoat.2017.06.047 ↗
22. Influence of cerium (IV) ions on the mechanism of organosilane polymerization and on the improvement of its barrier properties10.1016/j.electacta.2008.11.007 ↗
23. Multifunctional, environmental coatings on AA2024 by combining anodization with sol-gel process10.1016/j.ceramint.2021.12.316 ↗
24. Corrosion protection of clad 2024 aluminum alloy anodized in tartaric-sulfuric acid bath and protected with hybrid sol-gel coating10.1016/j.electacta.2013.09.004 ↗
25. Corrosion protection properties of anodized AA2024T3 alloy sealing with organic-based species
26. Corrosion resistance of 2524 Al alloy anodized in tartaric-sulphuric acid at different voltages and protected with a TEOS-GPTMS hybrid sol-gel coating10.1016/j.surfcoat.2017.05.090 ↗
27. Corrosion protection of AA2524-T3 anodized in tartaric-sulfuric acid Bath and protected with hybrid sol-gel coating10.4028/www.scientific.net/KEM.710.210 ↗
28. Hydrophobic surface treatments for improving the corrosion resistance of anodized AA2024-T3 alloys10.1016/j.electacta.2019.02.034 ↗
29. Mechanisms of corrosion protection with organic coatings
30. Anticorrosive coatings: a review10.1007/s11998-008-9144-2 ↗
31. Auger and XPS studies of cerium corrosion inhibition on 7075 aluminum alloy
32. Inhibition of aluminum alloy corrosion by Cerous cations
33. Cerium conversion coatings for the corrosion protection of aluminium
34. Development of cerium-rich layers on anodic films formed on pure aluminium and AA7075 T6 alloy10.1149/2.0091501jes ↗
35. Cerium-based sealing of anodic films on AA2024T3: effect of pore morphology on anticorrosion performance10.1149/2.1001614jes ↗
36. Editors’ choice—dealloying-driven cerium precipitation on intermetallic particles in aerospace aluminium alloys10.1149/1945-7111/abf50d ↗
37. Influence of the final thermal sealing on the properties of combined anodic alumina/cerium conversion coatings on AA2024-T3 aircraft alloy10.59957/jctm.v58i5.124 ↗
38. Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy10.1007/s10800-023-02012-9 ↗
39. Wilson · 1988
40. Cerium-based conversion layers on aluminum alloys10.1016/S0169-4332(00)00873-4 ↗
41. Microstructural and electrochemical characterization of environmentally friendly conversion layers on aluminium alloys10.1590/S0103-50532003000400024 ↗
42. The phase stability of cerium species in aqueous systems10.1149/1.2130572 ↗
43. Impact of the addition of cerium salts (Ce(III) and Ce(IV)) on formation and ageing of a silica sol-gel layer10.1016/j.surfcoat.2016.07.006 ↗
44. The effects of cerium ions on the curing, polymerisation and condensation of hybrid sol-gel coatings10.1016/j.jnoncrysol.2018.12.021 ↗
45. Influence of sol-gel process parameters on the protection properties of sol–gel coatings applied on AA202410.1016/j.surfcoat.2014.02.038 ↗
46. Hybrid sol-gel coatings applied on anodized AA2024-T3 for active corrosion protection10.1016/j.surfcoat.2021.127251 ↗
47. Effect of cerium on the physicochemical and anticorrosive features of TEOS-GPTMS sol-gel coatings deposited on the AZ31 magnesium alloy
48. Hybrid sol–gel coatings doped with cerium nanocontainers for active corrosion protection of AA2024
49. Optimization of hybrid sol-gel coatings by combination of layers with complementary properties for corrosion protection of AA202410.1016/j.porgcoat.2010.04.013 ↗
50. Protective ability of hybrid nano-composite coatings with cerium sulphate as inhibitor against corrosion of AA2024 aluminium alloy10.1016/j.porgcoat.2011.09.005 ↗
51. Protective abilities of nanocomposite coatings containing Al 2O3 nano-particles loaded by CeCl310.1016/j.porgcoat.2011.02.013 ↗
52. Enhancement of the cerium oxide primer layers deposited on AA2024-T3 aircraft alloy by preliminary enhancement of the cerium oxide primer layers deposited on AA2024-T3 aircraft alloy by preliminary anodization10.5599/jese.478 ↗
53. Ce post-treatment for increased corrosion resistance of AA2024-T3 anodized in tartaric-sulfuric acid10.1016/j.corsci.2022.110371 ↗
54. Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T310.1016/j.corsci.2023.111330 ↗
55. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA10.1016/j.surfcoat.2024.130683 ↗
56. Estudo da resistência à corrosão da liga de alumínio 2024-T3 anodizada em ácido tartárico sulfúrico protegida com recobrimentos híbridos sol-gel modificados com inibidores
57. Spurk · 2008
58. The Aluminium Association · 2015 · 31
59. EIS investigation of a Ce-based posttreatment step on the corrosion behaviour of Alclad AA2024 anodized in TSA10.1002/sia.6633 ↗
60. Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid10.1016/j.surfcoat.2024.130682 ↗
61. Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: corrosion behaviour and Ce ions distribution10.1016/j.apsusc.2020.147634 ↗
62. Ramirez · 2019
63. Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating10.1016/j.surfcoat.2019.05.028 ↗
64. Cerium conversion coating and sol-gel coating for corrosion protection of the WE43 Mg alloy10.1016/j.corsci.2022.110527 ↗
65. Precipitation-hardness map for Al–Cu–Mg alloy (AA2024-T3)10.1016/j.jallcom.2020.157164 ↗
66. MultiSIMNRA: a computational tool for self-consistent ion beam analysis using SIMNRA
67. Localised corrosion assessment of friction-stir welded AA7050-T76511 alloy: galvanic interactions and microstructural effects10.1177/1478422X251342577 ↗
68. Spectra and details of the structure of europium acetates with derivatives of 1,10-phenanthroline10.1016/S0925-8388(01)01028-3 ↗
69. Socrates · 2001
70. Synthesis of polypyrrole-magnetite/silane coatings on steel and assessment of anticorrosive properties10.1016/j.electacta.2013.07.105 ↗
71. Effect of cerium concentration on corrosion resistance and polymerization of hybrid sol-gel coating on martensitic stainless steel10.1016/j.porgcoat.2012.06.005 ↗
72. Synthesis of aqueous highly branched silica sol as underlying crosslinker for corrosion protection10.1016/j.porgcoat.2017.06.023 ↗
73. Schubert · 2015 · 1
74. Corrosion behavior of anodized Al-Cu-Li alloy: the role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
75. Effect of iron-containing intermetallic particles on film structure and corrosion resistance of anodized AA2099 alloy10.1149/2.1361809jes ↗
76. Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties10.1016/j.electacta.2016.06.131 ↗
77. Macroscopic and local filming behavior of AA2024 T3 aluminum alloy during anodizing in sulfuric acid electrolyte10.1149/1.2931522 ↗
78. Hybrid PEO/sol-gel coatings loaded with Ce for corrosion protection of AA2024-T3
79. Effect of cerium (IV) on thin sulfuric acid anodizing of 2024-T3 alloy10.1016/j.jmrt.2021.09.117 ↗
80. Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel10.1016/j.electacta.2010.04.002 ↗
81. Raman spectroscopy—research lab analytics
82. Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte10.1016/j.corsci.2010.03.004 ↗
83. Comparison by SEM, TEM, and EIS of hydrothermally sealed and cold sealed aluminum anodic oxides10.1149/1.2163811 ↗
84. Effects of oxygen evolution on the voltage and film morphology during galvanostatic anodizing of AA 2024-T3 aluminium alloy in sulphuric acid at −2 and 24 °C10.1016/j.electacta.2018.03.121 ↗
85. Cyclic oxidation processes during anodizing of Al-cu alloys10.1016/j.electacta.2007.05.052 ↗
86. FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes: influence of tartaric acid10.1149/1.2969277 ↗
87. Electrochemical characteristics of intermetallic phases in aluminum alloys10.1149/1.1869984 ↗
88. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures10.1021/cr500002z ↗
89. Anodizing of aluminium alloys10.1108/00022669910270709 ↗
90. Application of EIS to in situ characterization of hydrothermal sealing of anodized aluminum alloys: comparison between hexavalent chromium-based sealing, hot water sealing and cerium-based sealing10.1149/2.0231610jes ↗
91. Characterization of porous aluminium oxide films from a.c
92. Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion10.1016/0013-4686(95)00440-8 ↗
93. Comparison between the inhibition efficiencies of Ce(III) and Ce(IV) ammonium nitrates against corrosion of AA2024 aluminum alloy in solutions of low chloride concentration10.1016/j.corsci.2012.03.039 ↗
94. Effect of the anionic part of various Ce(III) salts on the corrosion inhibition efficiency of AA2024 aluminium alloy10.1016/j.corsci.2013.01.008 ↗
95. Effect of the degree of hydrolysis and condensation of Bis-[Triethoxysilylpropyl]Tetrasulfide on the corrosion protection of coated aluminum alloy 2024-T310.5006/1.3280675 ↗
96. Sol–gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
97. Constant-phase-element behavior caused by coupled resistivity and permittivity distributions in films10.1149/2.039112jes ↗
98. Effect of UV irradiation on the densification behavior, microstructure, and microwave dielectric properties of low temperature sintering Al2O3 ceramics
99. Dielectrical properties of CeO2 nanoparticles at different temperatures
100. Localized corrosion in AA2099-T83 aluminum-lithium alloy: the role of intermetallic particles10.1016/j.matchemphys.2015.05.037 ↗