journal article·2020-09Open access

Effect of organic additives in fluoacid-based Ti and Zr-treatments for galvanized steel on the stability of a polymer coated interface

L.I. Fockaert, M.V.E. Ankora, J.P.B. Van Dam, S. Pletincx, A. Yilmaz, B. Boelen, T. Hauffman, Y. Garcia-Gonzalez, H. Terryn, J.M.C. Mol

Abstract

The bonding properties of zirconium- and titanium-based conversion coatings were evaluated using model conversion solutions of H2ZrF6 and H2TiF6 with addition of various organic additives (PAA, PVA, PVP). Macroscopic testing techniques such as contact angle and pull-off adhesion measurements were performed on galvanized steel sheets. Complementary to this, molecular studies were performed on model zinc substrates using ATR-FTIR in the Kretschmann configuration. The macroscopic and molecular approaches showed a good correlation demonstrating ATR-FTIR in the Kretschmann configuration to be a valuable tool to gain fundamental insights in metal oxide-polymer interfacial phenomena. Zirconium-treated galvanized steel substrates were shown to have a higher bonding affinity for the polyester coil coat primer than titanium-treated galvanized steel substrates. The presence of organic additives did not further improve the bonding properties. Yet, organic additives initially improved the interfacial stability of titanium-treated substrates. However, on the long term, organic additives are shown to be detrimental for polyester coil coat adhesion. This adverse effect of organic additives on the long term was assigned to its selective dissolution during immersion and was most pronounced for titanium-treatments. The limited effect of organic additives in case of zirconium-treatments was attributed to the higher portion of chemical interfacial bonds, as well as its tendency for crosslinking reactions causing entanglement of polymeric compounds in the zirconium oxide structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Review—conversion coatings based on zirconium and/or titanium10.1149/2.0371803jes ↗
2. Evaluation of corrosion resistance and self-healing behavior of zirconium-cerium conversion coating developed on AA2024 alloy10.1016/j.surfcoat.2015.02.049 ↗
3. Composition and Corrosion Protection of Hexafluorozirconic Acid Treatment on Steel10.1002/maco.201508255 ↗
4. Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings10.1016/j.corsci.2008.03.015 ↗
5. Influence of phosphate ion on the morphology, adhesion strength, and corrosion performance of zirconium-based surface treatment10.1007/s11998-015-9694-z ↗
6. Corrosion behaviour of Zirconia barrier coatings on Galvanized steel10.1016/j.surfcoat.2005.11.098 ↗
7. The use of electrochemical techniques to study the corrosion behaviour of organic coatings on steel pretreated with Sol–Gel Zirconia films10.1016/S0013-4686(01)00653-3 ↗
8. effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating10.1016/j.apsusc.2015.03.148 ↗
9. Effect of zirconium conversion coating: adhesion and anti-corrosion properties of epoxy organic coating containing zinc aluminum polyphosphate (ZAPP) pigment on carbon mild steel10.1016/j.porgcoat.2016.01.015 ↗
10. Surface free energy characterization and adhesion performance of mild steel treated based on zirconium conversion coating: a comparative study10.1016/j.surfcoat.2014.02.057 ↗
11. Effects of zinc surface acid-based properties on formation mechanisms and interfacial bonding properties of zirconium-based conversion layers10.1021/jp209422d ↗
12. a comprehensive study of the green Hexafluorozirconic Acid-based conversion coating10.1016/j.porgcoat.2013.10.006 ↗
13. corrosion behaviour of fluotitanate pretreated and painted aluminium sheets10.1016/S0013-4686(96)00274-5 ↗
14. An electrochemical and SEM study of the mechanism of formation, morphology, and composition of titanium or zirconium fluoride-based coatings10.1016/j.surfcoat.2004.10.139 ↗
15. Formation of a zirconium-titanium based conversion layer on aa 6060 aluminium10.1016/S0257-8972(01)01663-2 ↗
16. SKPFM and SEM study of the deposition mechanism of Zr/Ti based pre-treatment on AA6016 aluminum alloy10.1016/j.surfcoat.2007.02.039 ↗
17. Initiation and growth of Modified Zr-based conversion coatings on multi-metal surfaces10.1016/j.surfcoat.2013.09.059 ↗
18. influence of surface hydroxyls on the formation of Zr-based conversion coatings on AA6014 aluminum alloy10.1016/j.surfcoat.2014.06.030 ↗
19. Zr-based conversion layer on Zn-Al-Mg alloy coated steel sheets: Insights into the formation mechanism10.1016/j.electacta.2014.05.163 ↗
20. Formation and characterisation of Ti-Zr Based conversion layers on AA6060 aluminium10.1016/j.surfcoat.2003.11.003 ↗
21. Jolivet · 2000
22. Brown · Chem. Thermodynamics Zirconium · 2008 · 1
23. Monochromatized X-Ray photoelectron spectroscopy of the AM60 magnesium alloy surface after treatments in fluoride-based Ti and Zr solutions10.1002/sia.2042 ↗
24. The mechanism of Hydrolytic Polymerization of Zirconyl solutions10.1557/JMR.1990.0161 ↗
25. Room-temperature preparation of ZrO2 precursor thin film in an aqueous peroxozirconium-complex solution10.1021/cm049771i ↗
26. Optimization of commercial zirconic acid based pretreatment on hot-dip galvanized and Galfan coated steel10.1016/S0257-8972(99)00171-1 ↗
27. Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating10.1016/j.apsusc.2015.03.148 ↗
28. The effect of zirconium-based surface treatment on the cathodic disbonding resistance of epoxy coated mild steel10.1016/j.apsusc.2014.07.178 ↗
29. Zirconium-based conversion film formation on zinc, aluminium and magnesium oxides and their interactions with functionalized molecules10.1016/j.apsusc.2017.06.174 ↗
30. Effect of zirconium-based conversion treatments of zinc, aluminium and magnesium on the chemisorption of ester-functionalized molecules10.1016/j.apsusc.2019.145199 ↗
31. Study of physics and chemistry of surfaces from frustrated total internal reflections10.1103/PhysRevLett.4.224 ↗
32. An integrated in situ ATR-FTIR and EIS set-up to study buried metal – polymer interfaces exposed to an electrolyte solution10.1016/j.electacta.2007.02.007 ↗
33. In situ ATR-FTIR Studies of the aluminium / polymer interface upon exposure to water and electrolyte10.1016/j.porgcoat.2006.07.002 ↗
34. ATR-FTIR kretschmann spectroscopy for interfacial studies of a hidden aluminum surface coated with a silane film and epoxy I. characterization by IRRAS and ATR-FTIR10.1002/sia.3779 ↗
35. In situ studies of conversion coated zinc / polymer surfaces during exposure to corrosive conditions10.1016/j.porgcoat.2010.09.012 ↗
36. Studying interfacial bonding at buried polymer–Zinc interfaces10.1016/j.porgcoat.2015.03.017 ↗
37. An in situ study of zirconium-based conversion treatment on zinc surfaces10.1016/j.apsusc.2015.08.205 ↗
38. An in situ spectro-electrochemical monitoring of aqueous effects on polymer / metal oxide interfaces10.1016/j.jelechem.2019.113311 ↗
39. Chemisorption of polyester coatings on zirconium-based conversion coated multi-metal substrates and their stability in aqueous environment10.1016/j.apsusc.2019.144771 ↗
40. The delamination of polymeric coatings from steel. Part 2: first stage of delamination, effect of type and concentration of cations on delamination, chemical analysis of the interface10.1016/S0010-938X(98)00167-X ↗
41. The delamination of polymeric coatings from steel. Part 1: calibration of the kelvinprobe and basic delamination mechanism10.1016/S0010-938X(98)00166-8 ↗
42. The influence of a Zr-based conversion treatment on interfacial bonding strength and stability of Epoxy Coated Carbon Steel10.1016/j.porgcoat.2016.11.016 ↗
43. synthesis and characterisation of surface gradient thin conversion films on zinc coated steel10.1016/j.electacta.2006.06.014 ↗
44. Formation and characterization of Fe3+ /Cu2+ modified zirconium oxide conversion layers on zinc alloy coated steel sheets10.1016/j.electacta.2013.08.161 ↗
45. addition of phosphates or copper nitrate in a fluotitanate conversion coating containing a silane coupling agent for aluminium alloy10.1016/j.porgcoat.2014.05.020 ↗
46. investigation of fluoacid based conversion coatings on aluminum10.1016/S0300-9440(98)00017-4 ↗
47. Faigen · 1975 · 3912548
48. Karmaschek · 1999 · 5868872
49. Fristad · 2006
50. Sander, Lothar · 1990 · 4921552
51. Wichelhaus · 2003
52. Effect of organic additives on the performance of titanium-based conversion coatings10.1016/S0010-938X(03)00016-7 ↗
53. Titanium coordination compounds : from discrete metal complexes to metal – organic frameworks10.1039/C7CS00001D ↗
54. Zr-based metal–organic frameworks: design, synthesis, structure, and applications10.1039/C5CS00837A ↗
55. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
56. Probing the formation and degradation of chemical interactions from model molecule / metal oxide to buried polymer / metal oxide interfaces
57. Formation of ultra-thin amorphous conversion films on zinc alloy coatings: part 1. composition and reactivity of native oxides on ZnAl (0.05%) coatings10.1016/j.electacta.2005.08.030 ↗
58. Empirical atomic sensitivity factors for quantitative analysis by Electron spectroscopy for chemical analysis10.1002/sia.740030506 ↗
59. Evaluation of a simple correction for the hydrocarbon contamination layer in quantitative surface analysis by XPS10.1016/j.elspec.2005.02.004 ↗
60. Surface sensitivity of X-Ray photoelectron spectroscopy10.1016/S0368-2048(98)00271-0 ↗
61. Attractive forces at interfaces10.1021/ie50660a008 ↗
62. Socrates · 2001
63. Coates, J. Encyclopedia of Analytical Chemistry, Interpretation of Infrared Spectra, A Practical Approach; Meyers, R. A., Ed.; John Wiley & Sons, Ltd.
64. In situ characterization of the initial effect of water on molecular interactions at the interface of Organic/Inorganic hybrid systems10.1038/srep45123 ↗
65. Unravelling the chemical influence of water on the PMMA/Aluminum oxide hybrid interface in situ10.1038/s41598-017-13549-z ↗
66. structural comparison of self-assembled monolayers of n-Alkanoic Acids on the surfaces of silver, copper, and aluminum10.1021/ja00063a062 ↗
67. Preferential sputtering effects in depth profiling of multilayers with SIMS, XPS and AES10.1016/j.apsusc.2019.03.211 ↗
68. Comparison of the sputter rates of oxide films relative to the sputter rate of SiO210.1116/1.3456123 ↗
69. Diagnosis of the nature of carboxylate coordination from the direction of shifts of carbon-oxygen stretching frequencies10.1016/S0020-1693(00)83783-4 ↗
70. Relationships between the carbon-oxygen stretching frequencies of carboxylato complexes and the type of carboxylate coordination
71. ATR-FTIR in kretschmann configuration integrated with electrochemical cell as in situ interfacial sensitive tool to study corrosion inhibitors for magnesium substrates10.1016/j.electacta.2020.136166 ↗