Toward halogen-free flame resistant polyethylene extrusion coated paper facings
Source abstract
Abstract
Wire and cable coverings are potentially a major cause of fire in buildings and other installations. As they need to breach fire walls and are frequently located in vertical ducting, they have significant potential to increase the fire hazard. It is therefore important to understand the ignition and burning characteristics of cables by developing a model capable of predicting their burning behaviour for a range of scenarios. The fire performance of electrical cables is usually dominated by the fire performance of the sheathing materials. The complexity of the problem increases when cable sheathing incorporates fire retardants. One-dimensional pyrolysis models have been constructed for cable sheathing materials, based on milligram-scale and bench-scale test data by comparing the performance of three different software tools (ThermaKin, Comsol Multiphysics and FDS, version 6.0.1). Thermogravimetric analysis and differential scanning calorimetry were conducted on powdered cable coatings to determine the thermal degradation mechanism, the enthalpy of decomposition reactions, and the heat capacities of all apparent species. The emissivity and the in-depth absorption coefficient were determined using reflectance and transmittance measurements, with dispersive and non-dispersive spectrometers and integrating spheres. Bench-scale tests were conducted with a mass loss calorimeter flushed with nitrogen on samples in a horizontal orientation, for comparison with the pyrolysis model of non-flaming decomposition at an external heat flux of 50 kW m-2. The parameters determined through analysis of the milligram-scale data were used to construct a pyrolysis model that predicted the total mass loss from calorimeter tests in anaerobic conditions. A condensed phase pyrolysis model that accurately predicts in-depth temperature profiles of a solid fuel, and the mass flux of volatiles evolved during degradation of the fuel, is an essential component of a comprehensive fire model, which when coupled to a computational fluid dynamics code can be used to predict the burning processes in a fire scenario. Pyrolysis models vary considerably in complexity based on the assumptions incorporated into the development of the model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Flame retardant materials and properties · Synthesis and properties of polymers · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Zweifel · 2009
2. New and potential flammability regulations
3. Environmental release and behavior of brominated flame retardants10.1016/S0160-4120(03)00123-5 ↗
4. Synthesis of fire retardant polymers without halogens10.1016/0033-0655(93)80016-4 ↗
5. Advances in environmentally benign coatings and adhesives10.1016/0300-9440(95)00531-5 ↗
6. Polymer flame retardancy: a new approach10.1002/(SICI)1097-4628(19980502)68:5<715::AID-APP4>3.0.CO;2-R ↗
7. Azoalkanes – novel flame retardants and their structure–property relationship10.1002/pat.1642 ↗
8. Triazene compounds as a novel and effective class of flame retardants for polypropylene10.1016/j.polymdegradstab.2012.03.019 ↗
9. Preparation and characterization of bis-[1,3,5] triazinyl diazenes and their utilization as flame retardants in polypropylene films10.1002/app.40413 ↗
10. Novel tetrapotassium azo diphosphonate (INAZO) as flame retardant for polyurethane adhesives10.1016/j.polymdegradstab.2011.12.005 ↗
11. Bis(1-propyloxy-2,2,6,6-tetramethylpiperidin-4-yl)-diazene. An innovative multifunctional radical generator providing flame retardancy to polypropylene even after extended artificial weathering10.1016/j.polymdegradstab.2010.02.035 ↗
12. Versatile bis(1-alkoxy-2,2,6,6-tetramethylpiperidin-4-yl)-diazenes (AZONORs) and related structures and their utilization as flame retardants in polypropylene, low density polyethylene and high-impact polystyrene10.1016/j.polymdegradstab.2012.05.014 ↗
13. Azoalkanes: a novel class of additives for cross-linking and controlled degradation of polyolefins10.1002/mame.200600498 ↗
14. Role of promoters in improving adhesions of organic coatings to a substrate10.1016/0300-9440(95)00572-2 ↗
15. Brewis · 1995
16. R.A. Kollaja, D.A. Devens, P.M. Russell, M.A. Hoisingto, Multilayer films having at least five film layers, wherein at least one layer is flame retardant, U.S. Patent 6,280,845 B1, August 28, 2001.
17. Determination of the adhesion between low density. Polyethylene and coated paper10.3183/NPPRJ-1987-02-02-p061-065 ↗
18. Wu · 1982 · 530
19. Azoalkanes: a novel class of flame retardants10.1002/marc.200600094 ↗
20. German standard DIN 4102-1: Fire behavior of building materials and building components-part 1: building materials, concepts, requirements and tests, 1998.
21. Preparation and characterization of ZnO nanoparticles coated paper and its antibacterial activity study10.1039/b605623g ↗
22. Statistical prediction model for water vapor barrier of extrusion-coated paper10.32964/TJ7.9.8 ↗
23. Modifications of paper and paperboard surfaces with a nanostructured polymer coating10.1016/j.porgcoat.2010.08.008 ↗
24. Surface treatment and printing properties of dispersion-coated paperboard10.1016/j.porgcoat.2005.06.010 ↗
25. Extrusion coating – the ideal process for specialty papers
26. Gregory · 2005
27. Effects of flame and corona treatment on extrusion coated paper properties10.32964/TJ10.10.29 ↗
28. Influence of high-temperature heat treatment on barrier and functional properties of polyolefin-coated papers10.1080/03602550902824382 ↗
29. Adhesion of polymers in paper products from the macroscopic to molecular level – an overview10.1163/016942410X525821 ↗
30. Adhesion phenomena in (co)extrusion coating of paper and paperboard10.1163/156856197X00877 ↗
31. Solidification process in extrusion coating
32. The influence of flame, corona and atmospheric plasma treatments on surface properties and digital print quality of extrusion coated paper10.1163/016942409X12561252292224 ↗
33. Permeability of polymers in protective organic coatings10.1016/j.porgcoat.2003.09.015 ↗
34. Polyethylene technology in extrusion coating
35. Surface treatments of polyolefins10.1016/0033-0655(93)80044-B ↗
36. J. Danhäuser, P. Kruck, W. Krafft, Improved polyethylene – coated paper photographic material, U.S. Patent 3,615,552, October 26, 1971.
37. Extrusion coating and products
38. Methods for the fire protection of plastics and coatings by flame retardant and intumescent systems10.1016/0033-0655(83)80003-X ↗
39. Comparison of cationic and uncharged phosphonated polynorbornenes as fire-retardant additives
40. Recent developments in flame retardant polymeric coatings10.1016/j.porgcoat.2013.07.014 ↗
41. Halogen-containing fire-retardant compounds
42. Flame retardant effects of magnesium hydroxide10.1016/S0141-3910(96)00067-5 ↗
43. Phosphorus-based flame retardancy mechanisms – old hat or a starting point for future development?10.3390/ma3104710 ↗
44. Nanocomposites – a new concept for flame retardant polymers
45. Advantages of flame retardants based on nitrogen compounds10.1016/S0141-3910(96)00045-6 ↗
46. Design and utilization of nitrogen containing flame retardants based on N-alkoxy amines, azoalkanes and related compounds
47. Synergists, adjuvants and antagonists in flame – retardant systems
48. Fire safety design requirements of flame–retarded materials
49. Rauwendaal · 1986
50. Dufton · 2003
51. Preparation and characterization of microencapsulated ammonium polyphosphate with polyurethane shell by in situ polymerization and its flame retardance in polyurethane10.1002/pat.1354 ↗
52. Migration of additives in polymer coatings: phosphonate additives and poly(vinylidene chloride)-based matrix10.1002/macp.200500030 ↗
53. Degradation of selected flame retardants on exposure to UV and elevated temperatures
54. Ecological issue of polymer flame retardancy10.1002/app.10946 ↗
55. Playing with fire: the global threat presented by brominated flame retardants justifies urgent substitution10.1016/S0160-4120(03)00115-6 ↗
56. M. Roth, R. Pfaendner, C.E. Wilén, M. Aubert, Symmetric azo compounds in flame retardant compositions, WO Patent 2008/101845 A1, August 28, 2008.
57. Kemppi · 1997
58. Understanding why adhesion in extrusion coating decreases with diminishing coating thickness10.1177/8756087908089486 ↗
59. An overview of the basic aspects of polymer adhesion. Part I. Fundamentals10.1002/pen.760351202 ↗
60. Surface degradation and hydrophobic recovery of. polyolefins treated by air corona and nitrogen atmospheric pressure glow discharge10.1002/app.21134 ↗
61. Plasma surface modification of polyethylene10.1016/S0927-7757(03)00242-5 ↗
62. Plasma modification of polyolefin surfaces10.1002/pts.829 ↗
63. J.M. Grace, L.J. Gerenser, C.J. Landry-Coltrain, K.D. Sieber, M.J. Heinsler, D.R. Freeman, High-efficiency plasma treatment of paper, U.S. Patent 6,565,930 B1, May 20, 2003.
64. Plasma surface modification of polymers for improved adhesion: a critical review10.1163/156856193X00600 ↗
65. Plasma modification of polymer surfaces for adhesion improvement
66. The fundamentals of flame treatment for the surface activation of polyolefin polymers – a review10.1016/j.polymer.2010.05.036 ↗
67. Flame surface modification of polyethylene sheets10.1002/1521-3900(200205)181:1<225::AID-MASY225>3.0.CO;2-Z ↗
68. Flame treatment of low-density polyethylene: surface chemistry across the length scales10.1016/j.apsusc.2007.06.018 ↗
69. Studies on the adhesion between paper and low-density polyethylene. 5. The influence of polyacrylamide
70. Studies on the adhesion between paper and low-density polyethylene. 4. The influence of urea–formaldehyde
71. FlameStab®NOR116 · 2010
72. 1997
73. The influence of an N-alkoxy HALS on the decomposition of a brominated fire retardant in polypropylene10.1016/j.polymdegradstab.2007.12.008 ↗
74. Mechanistic analysis of the fire performance of a fire retardant system10.1177/0734904107081106 ↗